STABILA LD 250 BT 165ft Bluetooth Laser Distance Measurer Instruction Manual
- June 4, 2024
- STABILA
Table of Contents
STABILA LD 250 BT 165ft Bluetooth Laser Distance Measurer
Product overview
- On/Measure
- Area/Volume/Unit
- Bluetooth®
- Clear/Off
Instruction
Instrument Set-up
Introduction
- The safety instructions and the user manual should LU be read through carefully before the product is used for the first time.
- The person responsible for the product must ensure adherence to all of them. users understand these directions and adhere to them.
Technical data
- Favorable conditions are: white and diffuse reflecting target white painted wall), low background illumination, and moderate temperatures.
- Unfavorable conditions are targets with lower or higher reflectivity or high background illumination or temperatures at the upper or lower end of the specific temperature range.
- Tolerances apply from 0.2 m to 5 m with a confidence level of 95%.
- With favorable conditions, the tolerance may deteriorate by 0.1 mm/m tor distances above 5 m.
- With unfavorable conditions, the tolerance may deteriorate by 0.15 mm/m for distances above 5 m.
Message Codes
If the message Error does not disappear after switching on the device repeatedly, contact the dealer. If the message lnFo appears with a number, press the Clear button and observe the following instructions:
Laser classification
Warranty
Stabila provides a two-year warranty for the product. Futher information can be found on the Internet at: www.stabila.de.
Areas of responsibility
Responsibilities of the manufacturer of the original equipment:
- STABILA Messgerate
- Gustav Ullrich GmbH
- P.O. Box 13 40 / D-76851 Annweiler
- Landauer Sir. 45 / D-76855 Annweiler
USA/Canada:
- STABILA Inc.
- 332 Industrial Drive South Elgin, IL 60177
- 1.800.869.7 460
The company above is responsible for supplying the product, including the User Manual in a completely safe condition. The company above is not responsible for third-party accessories.
Responsibilities of the person in charge of the in instrument:
- To understand the safety instructions on the product and the instructions in the User Manual.
- To be familiar with local safety regulations relating to accident prevention.
- Always prevent access to the product by unauthorized personnel.
Use of the product with Bluetooth
WARNING
Electromagnetic radiation can cause disturbances in other equipment, in
installations (e.g. medical ones such as pacemakers or hearing aids), and in
aircraft. It can also affect humans and animals.
Precautions:
Although this product conforms to the most stringent standards and
regulations, the possibility of harm to people and animals cannot totally
excluded.
- Do not use the product near petrol stations, chemical plants, in areas with a potentially explosive atmosphere, and where blasting takes place.
- Do not use the product near medical equipment.
- Do not use the product in airplanes.
- Do not use the product near your body for extended periods.