bebob MLmicro Rechargeable Li-Ion hot swap battery User Manual
- August 22, 2024
- bebob
Table of Contents
bebob MLmicro Rechargeable Li-Ion hot swap battery
Specifications
- Battery Type: Rechargeable Li-Ion
- Capacity: 3Ah / 43Wh
- Output Voltage: 14.4V
- Output Connectors: 3x Lemo 2p, 1x USB-C (PD3) 45W, 1x USB-A 5V / 1A, 2x Twist D-Tap
- Compatibility: Micro V- and V-Mount Batteries
- Material: Milled Aluminium Housing
- Warranty: 2-year unconditional warranty on all parts (except cells), 1-year warranty on cells at 70% original capacity
Product Usage Instructions
Safety Instructions
- Store the battery within specified temperature, humidity, and state of charge ranges.
- For long-term storage, maintain charge between 50% and 75% an recharge every 4 weeks.
- Fully recharge the battery before reuse due to self-discharge during storage.
Operations
- The MLmicro will take over powering the camera when the back mounted battery falls below 12.5V.
- LEDs display remaining capacity until charge falls below 20%, then switch to warning pattern.
- If a charged alternative (>14.5V) is inserted, it takes over without interruption.
- If not replaced before depletion, the camera/device will switch off.
- The MLmicro supports hot swaps with only 20% capacity remaining.
FAQ
-
Q: How do I dispose of used batteries?
A: Users are legally obliged to appropriately dispose of used batteries. Do not dispose of them in household waste; return them to the manufacturer for free-of-charge disposal. -
Q: What is the warranty coverage for the battery?
A: The battery is covered by a 2-year unconditional warranty on all parts, except for the cells. The cells have a 1-year warranty at 70% of their original capacity.
MLmicro
Rechargeable Li-Ion hot swap battery
USER MANUAL
WE STRONGLY RECOMMEND READING THIS INSTRUCTION CAREFULLY BEFORE USING!
- FOR YOUR PERSONAL SAFETY, PLEASE OBSERVE THE SAFETY INSTRUCTIONS AND WARNINGS
- OBSERVE ALL COMMON AND LOCAL SAFETY REGULATIONS
- PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE
Features
- 14,4V / 3Ah // 43Wh Battery with Hotswap & Buffer function and multiple output connectors
- Rechargeable by a back-mounted battery, external charger, D-Tap or USB-C
- Automated takeover from empty back-mounted batteries for an uninterrupted power supply
- Visual low-capacity alarm
- Stepless capacity display
- Compatible with micro V- and V-Mount Batteries
- Fits directly to cameras via V-Mount and micro V-Mount plates
- External Outputs
- 3x Lemo 2p 14,4V (unreg.) / 2A
- 1x USB-C (PD3) 45W
- 1x USB-A 5V / 1A
- 2x Twist D-Tap 14,4V (unreg.) / 5A
- Automatic data communication; ARRI, Blackmagic Design, RED, Sony
- Extreme robust housing due to milled aluminium
- Zero maintenance, compact and lightweight
- Power safe mode
Safety Instructions
- For professional use only!
- Operate only with recommended batteries!
- Charge only with recommended charger!
- Risk of explosion when exposed to fire!
- Avoid contact with water!
- Do not short the battery terminals!
- Do not open or repair the device!
- Handle with care! Do not throw or drop the device!
- Do not operate in overhead or hanging applications!
- Do not expose to temperatures above 60°C/140°F or below -20°C/-4°F
- Do not overload the device (see specifications)!
-
- Do not supply more charging voltage than specified (see specifications)!
Storage
- The battery shall be stored within the specified temperature, humidity and state of charge ranges (see specifications).
- Storage ambient temperature range is (see specifications).
- For long-term storage (longer than 4 weeks), the battery should have a charge between 50% and 75%. The battery should be recharged every 4 weeks.
- In storage, some self-discharge will occur. It is advised to fully recharge the battery before reusing it.
- It is recommended to use the “power safe mode” (see below) when storing the MLmicro.
Warranty
- The battery is covered by a 2-year unconditional warranty on all parts, except for the cells.
- The cells are covered by a 1-year warranty at 70% of their original capacity.
- If you have any additional questions or warranty issues, please contact the appropriate bebob distributor listed at www.bebob.tv.
Disposal
- Users are legally obliged to appropriate disposal of used batteries.
- Batteries must not be disposed of in household waste – see crossed-out dustbin symbol on the battery label.
- You can return any batteries of our battery range (old and current models) to our warehouse for free-of-charge disposal.
- If the battery is not completely discharged, precautions against a potential short-circuit must be taken.
Operations
Hotswap
- The MLmicro will take over powering the camera when the back mounted battery falls below 12,5V.
- The LEDs will display the remaining capacity until its remaining charge falls below 20%. Then the MLmicro will switch over to a warning pattern, signalling its imminent depletion.
- If the back mounted empty battery is replaced with a sufficiently charged alternative (>14,5V) then the new battery will take over powering the camera/device and the additional outputs without interruption.
- If the back mounted empty battery is not replaced until the MLmicro capacity is depleted, then the camera/device will switch off.
- The MLmicro is capable of performing hot swaps with only 20% of its capacity remaining. In combination with its self-charging function this results in a potentially unlimited number of hot swaps.
- Only batteries with sufficient charge will be detected by the MLmicro
- Do not stack more than two batteries in combination with a hot swap battery.
Discharging
- You can use the MLmicro as standalone battery; at 10% capacity left, the MLmicro status LED will switch over to a warning pattern, signalling its imminent depletion.
- The maximum discharge current shall not be exceeded (see specifications).
- The device features separate self-resetting overload protections for each of its supply sockets.
- The main power supply will stay intact in case of a short circuit on one of the external supply sockets of the MLmicro (self-reset will occur within a few minutes).
- Do not discharge near flammable materials and avoid high thermal loads.
- Discharge the battery only within the specified temperature range (see specifications).
In-operation Charging (via stacked battery – automatic charge)
- The MLmicro can be charged by any micro-V-Mount or standard V-Mount battery mounted on its back or any compatible charger (see specifications).
- While charging the Status LED turns blue, symbolising “Charging”.
- The MLmicro automatically performs in-operation charging if required.
- During in-operation charging the MLmicro is still capable of executing its hotswap function.
- We recommend to use bebob batteries for full functionality.
Charging (via standard charger)
- Do not charge batteries unattended!
- Do not charge near flammable object.
- Disconect all external loads before the charging process.
- Wait 30 minutes since the last discharge before charging.
- The MLmicro can be charged via any bebob V-Mount charger (or equivalent charger using the CC-CV method).
- Do not supply more charging voltage than specified (see Specifications)!
- Charge time will depend on charging power and ambient temperature.
- The optimal charging ambient temperature is from 10°C/50°F to 30°C/86°F.
- The bebob batteries can be recharged with any amount of remaining charge.
- The gauge LEDs will indicate the state of charge during the charging process.
Charging by D-Tap or USB-C
- When the output switch is turned off, the MLmicro can be charged via USB-C.
- USB-C might hold previous state when cable is connected.
- Please reattach the USB-C cable to establish recent charging mode.
- Charging via D-Tap is always possible.
Camera Data Communication
- The MLmicro will automatically select the communication with the camera: ARRI, Blackmagic Design, RED, Sony.
Ambient Light Detection
- The MLmicro will adjust the brightness of status/gauge LEDs depending on ambient light situation.
Flashlight
- To toggle the flashlight quickly press the latch twice.
Power Safe Mode
- To activate the power safe mode (in case of storage or transport), press and hold the latch continuously for 15 seconds. The MLmicro will shut down.
- Reactivate the MLmicro by either charging it with any common V-mount, D-Tap, USB-C charger or by mounting a secondary battery on its back. The connected MLmicro may take up to 30 seconds until it is operational.
- When the MLmicro is not in use for more than 5 days and voltage falls below 40%, the power safe mode will be activated automatically.
Specifications
bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: +49 (0)89
8563 485-0
www.bebob.tv
March 2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>