genexis XGS2110 Fiber Box Installation Guide

: August 21, 2024
: genexis

Table of Contents

genexis XGS2110 Fiber Box
Product Information
Product Usage Instructions
Box contents
Installation guide
Connecting the FiberBox
Port Overview
LED overview
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

genexis XGS2110 Fiber Box

Product Information

Specifications

Product: FiberBox XGS2110
Placement Options: Desk placement, Wall mount
Ports: WAN port, LAN port, Power port
Power: Supplied power adapter
LEDs: System LED, Uplink LED
Laser Class: Class 1 Consumer Laser
Compliance: Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, Delegated Directive 2015/863, Ecodesign Directive 2009/125/EC

Product Usage Instructions

Installation

Label Position: The product label is positioned on the back of the device.
Preparation: Ensure a power socket is within reach of the installation location. Follow instructions precisely to avoid damage to fiber optic connectors.

Placement
The product supports desk placement or wall mounting. It is recommended to keep the device away from obstacles.

Desk Placement

Place the device horizontally on a flat surface.

Wall Mount

Download and print the drilling template from here.
Use the template to drill holes, insert plugs, and secure screws.
Mount the device to the wall using the designated points on the back of the FiberBox.

Connecting the FiberBox

Open the green shutter on the WAN port and insert the fiber patch cable.
Connect your gateway to the LAN port using an RJ45 network cable (CAT6 recommended).
Plug in the supplied power adapter and connect it to a power socket.
Press the ON/OFF button to power on the device.

Warning: Avoid looking directly into the fiber connector when the product is powered on due to the laser light.

FAQ

Is it safe to look directly into the fiber connector when the product is powered on?
The product contains a laser that emits invisible light. While it is classified as a Class 1 Consumer Laser and deemed safe under normal conditions, it is advised not to look directly into the fiber connector when powered on.
Where can I find the EU declaration of conformity for the FiberBox XGS2110?
The full text of the EU declaration of conformity is available at the following internet address: here.

Box contents

Genexis FiberBox
Power adapter
Labels (self-adhesive)

Installation guide

Label position
The product label is positioned on the back of the device.

Preparation
Ensure there is a power socket within reach of where the device is being installed.

Important: Instructions need to be followed precisely and uninterrupted. This minimizes the risk of damage to the fiber optic connectors, causing a severe degradation of signal quality.

Placement
The product supports two placement options; desk placement and mounted to a wall. It is recommended to place the device ‘away’ from obstacles and objects.

Desk placement

1. Place the device horizontally on a flat surface.

Wall mount

1. Download and print the drilling template from <https://genexis.eu/product/fiberbox/downloads>
2. Use the drilling template to drill holes, insert plugs and put screws into place.
3. Use the wall mount points on the back of the FiberBox to mount the device to the screws.

Connecting the FiberBox

Open the green shutter from the WAN port, and insert the fiber patch cable from your fiber outlet into the WAN port.
Connect your gateway to the LAN (10GE) port via an RJ45 network cable. A CAT6 cable or better is recommended.
Connect the supplied power adapter to the FiberBox and plug the adapter into a power socket.
Press the ON/OFF button to power on the device.

Warning: This product contains a laser that emits invisible light. It is a Class 1 Consumer Laser product according to EN 50689:2021, which means it is safe under all conditions of normal use. However, it is still advised to not look directly into the fiber connector when the product is powered on.

Warning: Do not cover the device, this will interfere with the ventilation.

Ambient Operating
Temperature: 0°C ~ 40°C

Port Overview

ON/OFF button
Power ON or OFF – press and release to switch device ON or OFF
Reset button (recessed)
Reset – press and release Factory reset – press and hold the button until System and Uplink LED start to blink

LED overview

EU Declaration of Conformity

Hereby, Genexis Netherlands B.V. declares that the product FiberBoxXGS2110 complies with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, Delegated Directive 2015/863 and Ecodesign Directive 2009/125/EC.
The full text of the EU declaration of Conformity is available at the following internet address: https://genexis.eu/product/fiberbox/red/fiberbox- xgs2110

Company Name
Genexis Netherlands B.V.

Company Address
Lodewijkstraat 1a
5652 AC Eindhoven
The Netherlands
Name and title of authorized person
Maarten Egmond, CTO

Place of issue
Eindhoven
The Netherlands

Date of issue
2023-10-02

Revision 1.1- October 2023 – Copyright © 2023 Genexis Netherlands B.V. All rights reserved. Multiple languages of this document and additional product information are available on https://genexis.eu/product/fiberbox/downloads Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or otherwise revise this publication without notice.