NOVOGRATZ B344343XXXCOM Monroe Wide Electric Fireplace Instruction Manual

: August 21, 2024
: NOVOGRATZ

Table of Contents

NOVOGRATZ B344343XXXCOM Monroe Wide Electric Fireplace
Helpful Hints
Cam Lock Fastening System
Board Identification
Part List
Maximum Loads
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NOVOGRATZ B344343XXXCOM Monroe Wide Electric Fireplace

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (to I free)
Visit: www.ameriwoodhome.com

WARNING

Unit can tip over causing severe injury or death.
Anchor unit to stud in wall (if instructed to).
Do Not allow children to climb on unit.
Put heavy items on lower shelves or drawers.

Assembly Difficulty Meter
People needed for assembly: 2
Follow Ameriwood Home

Contact Us!
Do NOT return this product!
Contact our friendly customer service team first for help.

Visit ameriwoodhome.com

Helpful Hints

PEOPLE NEEDED FOR ASSEMBLY: 2

Open your item in the area you plan to keep it to avoid excessive heavy lifting.
Identify, sort and count the parts before attempting assembly.
Make sure to always face the point between (+) & (-) on the top of the Cam Lock towards the outer edge.
Back panel must be used to make sure your unit is sturdy.
Do NOT use harsh chemicals or abrasive cleaners on this item.
Never push, pull, or drag your furniture.

Before You Start

Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: #2 Phillips Head Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.

Cam Lock Fastening System

This Cam Lock Fastening System will be used throughout the assembly process.

Before You Start Please
Note: You may need to lightly tap the wood dowels with a hammer into the holes during your assembly process.

Wood Dowel Insertion:
Insert wood dowel completely into the hole.

2 PEOPLE NEEDED FOR ASSEMBLY
CAUTION: Failure to use 2 people for assembly could result in unit damage or personal injury.

Board Identification

Not Actual Size

See the manual came with your insert for part numbers and important safety information.

Not Actual Size

Part List

Actual Size
For any replacement hardware, order part # 24343905COM0SF

Not Actual Size

STEP 1

Attach 15 Cam Bolts (1) to Base (D) as illustrated. Do NOT over-tighten.

STEP 2

Attach 12 Cam Bolts (1) to Top Panel (A) as illustrated. Do NOT over-tighten.
Insert two Wood Dowels (3) into Top Panel (A) as illustrated.

STEP 3

Dowels extend out 3/8″. For more details, please see page 4

Use one drop of glue in dowel hole.

Insert Wood Dowel (3) into Support (K) x 2 as illustrated.
Insert four Wood Dowels (3) into Back Panel (B) as illustrated.
Insert two Wood Dowels (3) into Lower Front Panel (J) as illustrated.

STEP 4

Dowels extend out 3/8″. For more details, please see page 4

Attach four Cam Bolts (1) to Left and Right Side Panel (E) & (F) as illustrated. Do NOT over-tighten.
Insert 12 Wood Dowels (3) into Left and Right Side Panel (E) & (F) as illustrated.

Use one drop of glue in dowel hole.

STEP 5

Dowels extend out 3/8″. For more details, please see page 4

Use one drop of glue in dowel hole.

Insert four Wood Dowels (3) into Partition Panel (C) x 2 as illustrated.

STEP 6

Dowels extend out 3/8″. For more details, please see page 4

Attach six Cam Bolts (1) to Upper Front Panel (I) as illustrated. Do NOT over-tighten.
Insert four Wood Dowels (3) into Upper Front Panel (I) as illustrated.

STEP 7

Attach ten Cam Bolts (1) to Left and Right Front Panel (H) & (G) as illustrated.Do NOT over-tighten.

STEP 8

Use one drop of glue in dowel hole.

Attach Lower Front Panel (J) to Base (D) using three Cam Locks (2) as illustrated

STEP 9

Use one drop of glue in dowel hole.

Attach Two Supports (K) to Base (D) using four Cam Locks (2) as illustrated.

STEP 10

Attach Partition Panel (C) to Base (D) using four Cam Locks (2) as illustrated.

Use one drop of glue in dowel hole.

STEP 11

Attach Left and Right Side Panel (F) & (E) to Back Panel (B) using four Cam Locks (2) as illustrated.

Use one drop of glue in dowel hole.

STEP 12

Attach Left and Right Side Panel (F) & (E) to Base (D) using four Cam Locks (2) as illustrated.

Use one drop of glue in dowel hole.

STEP 13

Attach Top Panel (A) to boards (B), (C), (E) and (F) using 12 Cam Locks (2) as illustrated.

STEP 14

Attach Left and Right Front Panel (H) & (G) to Upper Front Panel (I) using eight Cam Locks (2) and four Double End Cam Connectors (7) as illustrated.

STEP 15

Attach Metal Plate (6) to Left Front Panel (H) and Upper Front Panel (I) using two Screws (4) as illustrated.
Attach Metal Plate (6) to Right Front Panel (G) and Upper Front Panel (I) using two Screws (4) as illustrated.

STEP 16

Attach Left, Right Front Panel (H) & (G) and Upper Front Panel (I) to the unit using 16 Cam Locks (2) as illustrated.

STEP 17

Attach Metal Plate (6) to Left Front Panel (H) and Lower Front Panel (J) using two Screws (4) as illustrated.
Attach Metal Plate (6) to Right Front Panel (G) and Lower Front Panel (J) using two Screws (4) as illustrated.

STEP 18

Carefully insert the Fireplace into the back of the unit and slide to the front of the unit.
Attach Fireplace to Left and Right Front Panel (H) & (G) using 6 Screws (5) as illustrated.

STEP 19

Attach two Metal Brackets (9) to Support (K) using two Screws (5) as illustrated.

STEP 20
BEFORE CONNECTING THE UNIT TO A WALL ELECTRIC OUTLET
Please carefully read and follow instructions and safety warnings in “Fireplace Homeowners Operating Manual” to operate your fireplace.

WARNING
IF THE INFORMATION IN THE FIREPALCE OPERATING MANUAL IS NOT FOLLOWED, AN ELECTRIC SHOCK OR FIRE MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY l OR LOSS OF LIFE .

To allow proper heater ventilation, this unit must be located a minimum of 1-1/2″ away from a back wall.

STEP 21

IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE TIPPING RESTRAINT KIT PROVIDED WITH THIS PRODUCT:

Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall and and mark the wall through the Clip (12). Use Screw (11) to attach the Clip (12) to the wallboard. Use Screw (10) to attach the Clip (12) to Back Panel (B). Move the furniture to its final position.
Thread the strap (13) through the Clip (12) as shown in the illustration, tighten strap until snug. Do NOT over tighten.

For Masonry, Concrete, or other wall materials:
Consult your local hardware store for appropriate anchors to securely attach the safety bracket

Maximum Loads

This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury.

Warning: Risk of injury to persons – do not place a television on this furniture. This furniture is not approved for use with a television.

Certificate of Conformity

This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual.
This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).
This product is distributed by: Dorel Home Furnishings, Inc.
410 East First Street South Wright City, MO 63390 636-745-3351
Site of Manufacture: Binh Duong, VietNam
See front page of instruction manual for date of manufacture.

Register your product to receive the following:

New trend details – sneak peek on what’s new
Surveys – have a voice within our community
Exclusive deals and discount codes
Quick and easy replacement part service

To register your product, visit ameriwoodhome.com

Star Rating

Visit your local retailer’s website, rate your purchased product and leave us some feedback!
We would like to extend a big “Thank You” of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback.
ameriwoodhome.com