Sunco GR4 Goof Ring Recessed Light Installation Guide
- August 21, 2024
- SUNCO
Table of Contents
Sunco GR4 Goof Ring Recessed Light
COMPONENTS
EASY INSTALLATION
Recessed Can Mounting
- Turn off the power.
- If the new recessed light is installed skip to #3.
- Remove the existing 4″ recessed light from the can housing and disconnect power (TP24 connector or E26 Adapter, as appropriate).
- Applications also include ceiling fans and ceiling fixtures.
- Slide Goof Ring onto lamp housing on the back of 4″ recessed light (over retention clips).
- Note that the Goof Ring will be loose on top of the trim so you can reposition it.
- Reconnect the power to a 4″ recessed light (TP24 connector or E26 Adapter).
- Hook downlight retention clips into a can.
- Push downlight up into can housing until secure.
- Gently slide the Goof Ring so it is centered and covers uneven ceiling.
- Note that the Goof Ring is held in place between the recessed light and the ceiling.
- Turn on power.
WARNING
- Goof Ring is not a toy.
- This product should be installed under the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Abide by related regional and local laws or regulations.
- Check for damage during shipping before installation. If the product is damaged, do not use it.
- Use safety precautions. Safety eyeglasses and gloves are recommended.
- IMPORTANT: Although you can paint the surface of the Goof Ring with oil- or water-based paints to match your décor, doing so will void the warranty. A return for a refund is no longer an option after painting.
SPECIFICATIONS
- Color: Matte White
- Surface: Paintable
- Paint Type: Oil & Water based paints
- Housing: PC
- Weight: 0.11 Ibs
- Warranty: 1 year
- Operating Temperature: 4°F to 104°F
- Suitable Locations Inaress: Damp
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>