LAUNCH LE4-FRD-01 Universal Remote Key User Manual
- August 20, 2024
- Launch
Table of Contents
LAUNCH LE4-FRD-01 Universal Remote Key
Specifications
- Model: LE4-FRD-01 Universal Remote Key
- Suitable for vehicles with La AUNCH receiver
- Battery Type: 2032 with 3V
- Frequency Band: RFID (433.92 MHz)
- Max Power: -34.31 dBm
Product Usage Instructions
Changing Battery
- Break open the back side plastic cover of the remote.
- Remove the old battery and replace it with a new 2032 3V battery.
- Ensure the positive and negative terminals of the battery are correctly aligned.
Pairing with Vehicle
- Refer to the corresponding vehicle models to match.
- Install the key the same as before.
FCC Statements
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and the receiver. Connect the equipment to an outlet on a
circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help.
RF Warning for Portable Device:
The device has been evaluated to meet general RF exposure requirements The
device can be used in portable exposure conditions without restriction.
CE Statements:
This device operates with the following frequency bands and maximum
frequency power. The product is compliant with the power limits required by
the European Union.
EU Declaration of Conformity:
Launch Tech Co., Ltd. declares that this product with moLE4FR01 complies
with Directive 2014/53/EU and 2011/65/EU.
Overview
LE4-FRD-01 Universal Remote Key is suitable for a vehicle which contains the
LAUNCH receiver.
Note: The operating temperature of the product is -20–50℃.
Button description
Change battery
First use or when the battery runs out need to change a new battery, following
steps:
-
Break open the back side plastic cover to open the remote
-
Take the battery out and replace a new one
Note: The battery type is 2032 with 3V, ensure the positive and negative of the battery are correct. -
Install the key the same as before
Pairing method
Pairing with vehicle: Referring to the corresponding vehicle models to
match.
FCC statements
Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Information to the user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
RF warning for Portable device
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
CE statements
Frequency Band(s)
- This device operates with the following frequency bands and maximum frequency power.
- Note: The product is compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model.
- RFID (433.92 MHz) Max Pe.r.p. is -34.31 dBm.
EU DECLARATION OF CONFORMITY
Hereby, Launch Tech Co., Ltd. declares that this product with model LE4FR01
complies with Directive 2014/53/EU and 2011/65/EU.
FAQ
- Q: How do I know if my vehicle is compatible with the LE4-FRD-01 Universal Remote Key?
- A: The remote key is suitable for vehicles equipped with the LAUNCH receiver. Please refer to your vehicle’s manual or contact your vehicle manufacturer for compatibility information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>