Danfoss 12 Smart Logic Controller User Guide
- August 23, 2024
- Danfoss
Table of Contents
Danfoss 12 Smart Logic Controlle
Product Specifications
- Compact design
- IP 20 protection
- Integrated RFI filters
- Automatic Energy Optimization (AEO)
- Automatic Motor Adaptation (AMA)
- 150% rated motor torque for 1 min
- Plug and play installation
- Smart Logic Controller
- Low operating costs
Product Usage Instructions
Installation and Setup
- Ensure power to the unit is switched off before installation.
- Mount the drive securely in the designated location with proper ventilation.
- Connect power supply and motor according to the provided terminal connections.
Configuration
- Use the LCD display and navigation buttons to configure settings.
- Set up input and output parameters as needed based on your application requirements.
Operation
- Power on the drive and monitor the display for any error messages.
- Adjust settings using the potentiometer or LCD interface for optimal performance.
Maintenance
- Regularly check for dust accumulation and clean the unit if necessary.
- Ensure all connections are secure and free from corrosion.
- Refer to the user manual for troubleshooting guidance in case of any issues.
Frequently Asked Questions (FAQ)
Q: What is the IP rating of the product?
A: The product features IP 20 protection for both the enclosure and cover.
Q: How many digital inputs are available?
A: There are 5 programmable digital inputs with PNP/NPN logic supported.
Q: Can the drive be used for various applications?
A: Yes, the compact design allows for versatile application across different industries.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>