Wellshave T-X1 Multi Trimmer for Body and Beard Instruction Manual
- August 20, 2024
- WELLSHAVE
Table of Contents
Wellshave T-X1 Multi Trimmer for Body and Beard
Product Information
Specifications:
- Model: T-X1
- 2 1 functionality
- Input voltage: 110-240V~
- Power supply: DC5V/1A
- Power: 5W
- Battery capacity: 600mAh
- Charging time: 1.5 hours
- Working time: 1.5 hours
Product Usage Instructions
Charging:
Before using the appliance, ensure that the LED display is charged. Turn off
the appliance before charging. You can charge the appliance using the USB
charging line or the charging base. When using the charging base, connect the
line to the base.
Cleaning:
Ensure the appliance is turned off when cleaning. Wipe the body with a wet and
soft cloth. The knife head can be removed for cleaning. After cleaning,
install the knife head back and apply 2-3 drops of oil on the cutting
position. Operate the machine for a few seconds to lubricate it properly.
FAQ:
-
Q: Can the appliance be submerged in water for cleaning?
A: The appliance has a waterproof sealing ring and can be rinsed under the tap, but do not soak it in water. -
Q: How should I dispose of the battery?
A: Always remove the battery when discarding the product and send it to an official designated recycling point to ensure proper disposal of environmentally polluting substances.
TECHNICAL PARAMETER
| Input voltage | : 110-240V~ |
|---|---|
| Power supply | : DC5V/1A |
| Power | : 5W |
| Battery capacity | : 14.500 # 600mAh |
| Charging time | : 1.5H |
| Working time | : 1.5H |
ACCESSORIES
- Stainless steel blade
- Ceramic knife
- ON/OFF the switch
- LED display
- Knife head direct shot lamp
- Cut-Guide Combs (1.5/2.5/3.5/4.5mm)
- Charging cord
- Cleaning brush
- Oil bottle
- Waterproof sealing ring
- Charging base
- Nose hair trimming head
NOTES BEFORE USE
- This specification shall be read in detail before use and kept properly for future review.
- Access to people with physical, sensory, or mental disorders must have prior training in safe use and be informed of the possible dangers that the product may cause.
- Children are not allowed to play with the appliance, and shall not maintain or clean the appliance without adult care.
- Must check the appliance before use. Do not use the appliance if it is damaged, otherwise it will cause damage to the body.
- Damaged parts must be replaced with the original parts of the same model.
- The appliance has a waterproof sealing ring has waterproof function, can be rinsed under the faucet, but does not soak in water.
- Please keep the oil bottle out of the reach of children. Do not clean appliances, such as acetone or gasoline, with grinding cleaners or corrosive liquids.
HOW TO USE
- If you are getting ready to use the appliance, check that the LED display is charged; turn off the appliance before charging.
- The appliance is equipped with a USB charging line for convenient charging, also you can use the charging base to charge. When you use the charging base to charge, you need to connect the line to the base.
- The charging symbol of the display will flash and display how much power, the charging time is about 2 hours and the working hours are about 1.5 hours.
- The appliance can cut the body hair, and the direct light on the knife head can illuminate where you cut to facilitate cutting and check if the cutting is clean.
- The appliance has 4 limit combs (1.5/2.5/3.5/4.5mm), please turn off the power when loading the limit comb, insert the limit comb from the head of the cutting knife, the back of the body buckle, buckle with a slight buckle sound; the limit comb please choose from high to low until your suitable length is found.
- Point the knife head toward the direction of hair growth when cutting.
CLEANING AND MAINTENANCE
- Make sure the appliance is closed when cleaning.
- The body can be wiped with a wet and soft cloth, the knife head can be unloaded, and after removing, clean the hair inside the knife of the head of the body with a brush. After cleaning, install the knife head and drop 2-3 drops of oil on the knife head’s cutting position so that the machine can operate for a few seconds to lubricate it properly.
ENVIRONMENTAL PROTECTION
- The built-in charging battery contains environmentally polluting substances. Always remove the battery when discarding the product and send the battery to the officially designated recycling point.
- Please confirm that the battery is removed when the electrical power is off and the battery life is full. If the machine is still running, use the machine until it stops.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>