lorelli V2.3W Weekend New Work Print Instruction Manual
- August 20, 2024
- lorelli
Table of Contents
lorelli V2.3W Weekend New Work Print
MANUAL INSTRUCTION
Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read carefully – your child’s safety may be affected if you do not follow these instructions carefully.
Warning: Before use remove all plastic bags and packaging materials and keep them out of reach of newborn babies and children.
WARNING
- WARNING! Your balance may be adversely affected by your movement and that of your child!
- WARNING! Take care when bending or leaning forward or sideways!
- WARNING This carrier is not suitable for use during sporting activities!
- WARNING! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.
C SAFETY REQUIREMENT
- Weight: from 3.5 kg upto9 kg.AgeofuseO+ months.
- Never leave your child unattended inside the baby carrier!
- Always use safety belts!
- Use the baby carrier only when standing or walking.
- This baby carrier must not be used to transport a child on your back.
- Before use check that the straps are fitted and adjusted correctly and that the buckles are safely fastened into position.
- It is recommended that you place and remove the child from the carrier while sitting.
- Fit and adjust the leg openings for the child till their minimum size of 110 mm so that the child cannot slip out of them.
- Adjust the length of the belts so that they surround tightly and not make difficult the movements of the baby and the carrier.
- When the child is able to keep its head straight and its shoulder in a vertical position it can be transported in a forward-facing position.
- After placing the child in the baby carrier check carefully that the width adjusters are adjusted to the correct position. If needed adjust them until they are correctly tensioned.
- Do not place in the carrier more than one child at a time.
- Always ensure that the child has enough space around its face to breathe properly.
- Stop using the carrier if parts are missing or damaged.
- Do not fit to the baby carrier any accessories, spare parts or components not supplied or approved by the manufacturer.
- Remember that the child inside the baby carrier will react sooner to climatic changes than the adult who is carrying it.
- When using the soft carrier monitor your child
- For low birth weight babies and children with medical conditions, seek advice from a health professional before using the product.
- Be aware of hazards in the domestic environment e.g. heat sources, spilling of hot drinks.
- Keep away from fire !
- Never use a soft carrier when balance or mobility is impaired because of exercise, drowsiness, or medical conditions.
- Never wear a soft carrier while driving or being a passenger in a motor vehicle.
- Never use a soft carrier while engaging in activities such as cooking and cleaning which involve a heat source or exposure to chemicals.
- Check to assure all buckles, straps, and adjustments are secure before each use.
- Check for ripped seams, torn straps or fabric, and damaged fasteners before each use.
- Small children can fall through a leg opening. Adjust leg openings to fit baby’s legs snugly.
- Never bend at the waist; bend at the knees to prevent a child’s fall.
- Regularly check that your child is comfortably and securely seated in the baby carrier.
- Do not strap the baby too tight against your body.
- Allow room for the baby’s head movement.
- Never lie down or sleep with baby in the baby carrier.
- Inspect the baby carrier regularly for any signs of wear and tear
You have just get the most innovative and functional baby carrier ever created It can be used in the first days after the birth of your child until its weight is not more than 9 kg. This baby carrier is suitable for use indoor and outdoor. You can easily and discreetly to breastfeeding your baby by using it.
CLEANING AND MAINTENANCE )
Cleaning: Please, refer to the baby carrier label. After each wash check that
the fabric and seams are not worn or damaged.
Maintenance: Check the seams and baby carrier regularly to ensure that they
are not worn or damaged and that no part is missing. If any part is worn or
missing do not use the product!
PARTS
Picture A
- Headrest; Belts connecting the headrest to the baby carrier
- Shoulders belts
- Waist belts
- Pad
ADJUSTMENTS
ATTACHING THE HEADREST TO THE BABY CARRIER
- Attach the headrest to the baby carrier by using the sticky label.
- Button the buckles of the little belts that connect the headrest to the baby carrier.
- Button both “tic-tac” caps off the headrest to the baby carrier.
PRELIMINARY ADJUSTMENTS
-
Put the baby carrier on yourself as shown on graphic 1.
-
Adjust the length of the waist belt (from 64 to 125 cm) until you do not feel fit. Lock the belt. (graphic 2)
-
If your waist is extra small slide the buckle to shorten the length of the belt. (graphics 2a and 2b)
Roll up the rest of the belt and fix it by using the elastic band. (graphic 2c) -
If you want to unfasten the waist belt make sure that the coil part of it is out of the elastic band. Unwrap the belt and lengthen it until the needed size is reached. After that roll up and fix the rest part of it by using the elastic band.
-
Place the baby carrier in the position which is comfortable for you. (graphic 3)
ADJUST ING THE BABY CARRIER FOR NEWBORN /from O to 3 months of age
Headrest -in full protection position:
- Make sure that the pad is in position as shown on graphic 4.
- Unbutton the shoulder buckle and open as large as possible. Unbutton the main buckle. By holding the child in position “face to face” you carefully put it in the baby carrier. (graphic 5)
- Button the shoulder buckle and fasten the belt if it is necessary. (graphic 6)
- Button the main buckle by fastening or unfastening where it is necessary. (graphic 7) Adjust the leg openings to their minimal size of diameter to 110 mm.
BREAST FEEDING
- When breast feeding your child just move the baby carrier on the one or on the other side which is more comfortable for you. It may be more comfortable for you if the shoulder buckle is unlocked during the breastfeeding. (graphic 8)
- Do not forget to button the shoulder buckle when you have finished with breastfeeding. (graphic 9)
ADJUSTING THE BABY CARRIER FOR CHILD /from 3 to 6 months/
Headrest – in highest position:
- Remove the pad.
- Unbutton both buckles which connecting the headrest to the baby carrier. With one hand unstick the headrest from the sticky label ( from inside) and with other hand pull the headrest up to its highest position. (graphic 10)
- Attach the headrest to the sticky label and button the buckles of the belts. You will find that now there is enough space for children shoulders between the headrest and baby carrier. (graphic 11)
- Adjusting the headrest in its highest position provides better comfort for your child. (graphic 12a)
- To put the child in the baby carrier please, follow the same steps as in section “ADJUSTING THE BABY CARRIER FOR NEWBORN”. (graphic 12 b)
POSITIONING THE CHILD IN FACING FORWARD /from 4 to 7 months of age/
Do not use this position while the child is able to push its head through the
opening between headrest and baby carrier. When the child weights more than 7
kg you should not wear your child by using the old position.
- Make sure that the pad is removed.
- Unbutton the buckles which connecting the headrest to the baby carrier. Remove the headrest by unsticking the sticky label on its inside. (graphic 13)
- Unbutton the shoulder buckle and open as large as possible.
- Unbutton the main buckle. Put carefully your child in the baby carrier. (graphic 15)
- Button the shoulder buckle and the main buckle. Fasten the belts if it is necessary. (graphic 16)
TRANSFERRING THE LOAD TO FEMUR /about 8 months/
- Make sure that the pad is removed.
- Unbutton the buckles which connect the headrest to the baby carrier. Remove the headrest by unsticking the sticky label on its inside. (graphic 13)
- Unbutton the shoulder buckle and open as large as possible.
- Unbutton the main buckle. Put carefully your child in the baby carrier. (graphic 17)
- Button the shoulder buckle and the main buckle. Fasten the belts if it is necessary. (graphics 18, 19 and 20)
CHANGING THE SIDES
Follow the instructions below and you will find that it is very easy to do even with a child in the baby carrier.
- Slide the baby carrier to its central position. (graphic 21)
- Unfasten the shoulder buckle (the one on your back). (graphic 22)
- Pull the belt so that the lined shoulder-strap is hanging around your neck. (graphic 23)
- Slide the baby carrier to one side and place it on the other shoulder. Button the shoulder buckle. (graphics 24 and 25)
Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: + 359 54 850 830
e-mails: home.market@didis-ltd.com
export@didis-ltd.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>