ZHISUIXING R18 Smart Ring Instruction Manual
- August 19, 2024
- ZHISUIXING
Table of Contents
ZHISUIXING R18 Smart Ring
USING INSTRUCTION
- Charge the ring
- Search and install [JYouPro].
- Select your ring in the app and pair it.
- A flashing red light indicates that the ring is charging.
- A flashing green light indicates that the ring has finished charging.
Connecting ring
Open the JYouPro app, register an app login account to find the device, scan the device to find the corresponding Bluetooth name, click the connection, and after the connection is successful, the ring information will be displayed.
Personal settings
Set up related information in the personal information interface, you can set the number of step targets, units, and other information.
sports
In the mobile app interface, find the movement interface, you can choose a
variety of motion modes, including walking, running, riding, climbing,
Swimming, etc., and click on the motion button to start recording the
distance, pace, duration, and heart rate information of the motion. (This
function needs to be hit GPS on a mobile phone)
Motion data
On the homepage of the mobile APP, the number of steps, distanee, movement
duration, and calorie data recorded on the day can be displayed. You can also
click to view the sports data for the nearly week or one month. The number of
target steps can be set on the APP personal information interface.
Heart rate
On the homepage of the mobile app, select the heart rate, click to start at
the beginning of the measurement, the indicator light is turned on, and the
measurement is completed in 30 to 60 seconds.
blood pressure
On the homepage of the mobile app, select blood pressure, and click to start
measurement, the indicator light is bright green, and the measurement is
completed in 30 ~ 60 seconds.
Sleep
Watches can show the total sleep last night and the length of light sleep and
deep sleep. You can also click to view the sleep data for nearly a week or a
month.
common problem
- Ring measuring heart rate, blood pressure, and blood oxygen data abnormalities
- Generally, the sensor of the ring is caused by poor contact with the human body.
- Please pay attention to the fu II contact with your fingers during measurement.
- Sleep data abnormal cause
- Sleep monitoring is the state of self-conscious sleep and getting up, and needs to be worn correctly.
- When you fall asleep too late or wear it, you may have an error.
- Do not monitor sleep data during the day. The default sleep monitoring is from 9:30 pm to 12:00 noon the next day.
For more common questions, please see the app [My> FAQ]
Notice
-
The measurement results of this product are for reference only. Do not be used as a medical use and basis for the guidance of the doctor.
Cut this measurement re su It self-diagnosis and treatment. -
The waterproof level of this product is I P67, which cannot be used for deep diving and soaking in water for a long time. In addition,
this product does not heat the water because water vapor will affect the ring. -
The right to modify the content of this manual without any notifications will not be notified separately. Some functions are different in the corresponding software version, which is normal.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B., digital device, under part 15 of the FCC rules. These limits are designed to, provide reasonable protection against harmful interference in a residential installation. ., This equipment generates, uses, and can radiate radio frequency energy and, if not-, installed and used by the instructions, may cause harmful interference-, to radio communications. However, there is no guarantee that interference will not-, occur in a particular installation. If this equipment does cause harmful interference tto radio or television reception, which can be determined by turning the equipment off., and on, the user is encouraged to try to correct the interference by one or more of the following measures:-,
- Reorient or relocate the receiving antenna. .,
- Increase the separation between the equipment and the receiver. .,
- Connect the equipment to an outlet on a circuit different from that to which the,receiver is connected. .,
- Consult the dealer or an experienced radio/TV technician for help. .,
To assure continued compliance, any changes or modifications not expressly.,
approved by the party·”
Responsible for compliance could void the user’s authority to operate this-,
equipment. (Example- use only shielded interface cables when connecting to,
computer or peripheral devices) . .,
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:-,
- This device may not cause harmful interference, and-,
- This device must accept any interference received, including interference that-, may cause undesired operation. .,
RF warning statement
The device has been evaluated to meet general RF exposure rrequirements ., The
device can be used in portable exposure conditions without restriction. .,