KOHLER K-4991-ET Bardon High Efficiency Urinal Owner’s Manual
- August 19, 2024
- Kohler
Table of Contents
KOHLER K-4991-ET Bardon High Efficiency Urinal
Product Information
Specifications
- Model: BardonTM High-Efficiency Urinal K-4991-ET
- Spud Size: 3/4 inch
- Water Usage: Min. 0.125 gpf (0.5 lpf), Max. 1 gpf (3.8 lpf)
- Installation Type: Wall-mounted
- Color Options: White, Biscuit, Black
Product Usage Instructions
Installation
- Install the urinal according to the provided installation guide.
- Ensure compliance with local codes for flushometer requirements.
- For ADA compliance, the outlet spud height should be 17 inches or less from the floor to the top of the lip.
- For CSA B651 compliance, the measurement should be 16-7/8 inches or less from the floor to the top of the lip.
Maintenance
Regularly clean the urinal using non-abrasive cleaners to maintain hygiene.
Usage Tips
- Use water-saving flushometers for optimal water efficiency.
- Refer to the manufacturer’s instructions for any troubleshooting or maintenance issues.
FAQs
-
Q: What water pressure is required for this urinal?
A: The urinal is designed to work with standard water pressure commonly found in residential and commercial buildings. -
Q: Can I install this urinal myself?
A: It is recommended to hire a professional plumber for the installation to ensure proper setup and compliance with regulations.
Features
- Washout urinal
- 3/4″ (19 mm) top spud
- 0.125 – 1.0 gpf (0.47 – 3.8 lpf)
- Will replace K-4904-ET
Material
- Vitreous china
Installation
- 14″ (356 mm) extended rim
Codes/Standards
- ASME A112.19.2/CSA B45.1
- DOE – Energy Policy Act 1992
- EPA WaterSense®
- California Energy Commission (CEC)
- ADA
- ICC/ANSI A117.1
- CSA B651
- IAPMO Certification
Limited Warranty
KOHLER® One-Year Limited Warranty
See the website for detailed warranty information
www.kohler.com.
Available Colors/Finishes
Color tiles are intended for reference only.
Dimension
Technical Information
All product dimensions are nominal.
- Spud size: 3/4″, Inlet, Top
- Min. Water per Flush: 0.125 gpf (0.5 lpf)
- Max. Water per Flush: 1 gpf (3.8 lpf)
Designed for the above water use when installed with a water-saving flushometer.
Notes
- Install this product according to the installation guide.
- Refer to the manufacturer’s instructions and local codes for flushometer requirements.
- Recommended ADA outlet spud height will account for normal product variation.
- For ADA compliance, measurement must be 17″ (432 mm) or less from the floor to the top of the lip. For CSA B651 compliance, measurement must be 16-7/8″ (429 mm) or less from the floor to the top of the lip.
- ADA, CSA B651 compliant when installed to the specific requirements of these regulations.
Contact Information
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 6-11-2024 19:48 – US
References
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER