NETGEAR ANT24D18 14-dBi Directional Antenna Specifications And Datasheet
- June 13, 2024
- NETGEAR
Table of Contents
NETGEAR ANT24D18 14-dBi Directional Antenna
Introduction
The ANT24D18 indoor/outdoor directional* 2.4 GHz antenna provides a 3-in-1
solution for mixed applications in combination with an 802.11b or 802.11g
access point or wireless router. One, it delivers an extended access point
range in a single-floor environment ideally positioned in the corner of a
building. Two, it functions point-to-point so that you can wirelessly connect
LANs between buildings in a campus-type environment. Three, it provides multi-
floor transmission when placed on a ceiling, as the higher power output
extends the range through typical flooring materials. Includes several
mounting options (fixed wall, wall adjustable, and pole),
cable sold separately.
Directional: Concentrates transmit and receive radio-frequency energy
into a cone, or beam, for higher signal strength and reception in a single
direction.
Optimize WLAN Range and Power
NETGEAR’s ProSafe line of antennas and accessories for 802.11b, 802.11g and 802.11n devices give you multiple options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance between transmission points, and physical obstructions must be accounted for. With both directional and omnidirectional antennas, indoor and outdoor options, low-loss cables, mounting hardware, and other accessories, installers can customize a wireless solution that meets the requirements of even the most challenging applications.
Specifications
| Product | ANT24D18 | ANT224D10 | ANT2409 |
|---|
Description
| ProSafe 14 dBi Patch Panel Directional Antenna – ANT24D18| ProSafe 10
dBi 2×2 indoor/ outdoor directional antenna – ANT224D10| ProSafe 9 dBi Omni-
directional Antenna – ANT2409
Wireless Signal| IEEE 802.11g| IEEE 802.11n| IEEE 802.11g
Typical Application| Indoor/Outdoor| Indoor/Outdoor| Indoor/Outdoor
Maximum Outdoor Range| 21.4 km (13.3 miles)1| 8.5 km (5.28 miles)4| 11.5 km
(7.2 miles)2
Frequency Range| 2400 – 2500 MHz| 2400 – 2500 MHz| 2400 – 2485 MHz
Gain| 14 dBi3| 10 dBi3| 9 dBi3
Beam Width| Horizontal 60°
Vertical 30°
| Horizontal 33°
Vertical 32°
| Horizontal 360°
Vertical 30°
Polarization| Linear; Vertical| Linear; Vertical| Vertical
Operational Temperature| -30° to 75° C (-22° to 167° F)| -30º to 80º C (-22º
to 176º F)| -30º to 80º C (-22º to 176º F)
Dimensions| 262 x 240 x 30 mm
(10.31 x 9.44 x 1.18 in)
| 240 x 240 x 40mm
(9.45 x 9.45 x 1.57 in)
| 625 x 75 x 56 mm
(24.6 x 2.95 x 2.2 in)
Weight| 1.5 kg (3.35 lb)| .7 kg (1.54 lb)| .9 kg (2 lb)
Connectors
| • Antenna – Reverse N female
• Lightening arrestor – Reverse N female
• Adapter – Reverse SMA
| • Antenna – N Jack Male
• Lightening arrestor – N Jack Male to N Jack Male
• Extended Cable – N Plug Female
| • Antenna – Reverse N female
• Lightening arrestor – Reverse N female
• Adapter – Reverse SMA
Package Contents
| • 14 dBi Patch Panel Directional Antenna ANT24D18 (cable required, sold separately)
• Wall and pole mount brackets and hanging materials
• One reverse N type to reverse SMA adapter
• 2 m low-loss antenna cable (to connect antenna to the lightening arrestor)
• Lightening arrestor
• Installation guide and Warranty/support card
| • NETGEAR ProSafe Indoor/ Outdoor 10 dB 2×2 Directional Antenna ANT224D10
• 2 lightning arrestors with 30 cm low-loss cables
• 2 reverse N/SMA adapters
• Wall mount and pole mounting hardware
• Installation Guide and Warranty/ Support card
| • Indoor/Outdoor 9 dBi Omni-directional
• Antenna – ANT2409 (cable required, sold separately)
• Wall and pole mount brackets and hanging materials
• One reverse N type to reverse SMA adapter
• 2 m low-loss antenna cable (connection for lightening arrestor)
• Lightening arrestor
• Installation guide and Warranty/support card
Warranty| NETGEAR 2-year warranty| NETGEAR 2-year warranty| NETGEAR 2-year
warranty
Ordering Information (all regions)| ANT24D18| ANT224D10-10000S|
ANT2409-20000S
Product| ANT2407| ANT32405| ANT2405
---|---|---|---
Description| ProSafe 7 dBi Omni-directional Antenna – ANT2407| ProSafe 5 dBi
3×3 Omni- directional Antenna – ANT32405| ProSafe 5 dBi Omni-directional
Antenna – ANT2405
Wireless Signal| IEEE 802.11g| IEEE 802.11n| IEEE 802.11g
Typical Application| Indoor| Indoor| Indoor
Frequency Range| 2400 – 2485 MHz| 2400 – 2500 MHz| 2400 – 2500 MHz
Gain| 7 dBi3| 5 dBi3| 5 dBi3
Beam Width| Horizontal 360°
Vertical 60°
| Horizontal 360°
Vertical 30°
| Horizontal 360°
Vertical 30°
Polarization| Vertical| Vertical| Linear Vertical
Operational Temperature| -30º to 80º C (-22º to 176º F)| -20° to 65° C (-4° to
149° F)| -10° to 65° C (-4° to 149° F)
Dimensions
| 110 x 65 x 300 mm
(4.33 x 2.56 x 11.81 in)
Integrated cable length: 1.5 m
| 280 x 98 x 28 mm
(11 x 3.86 x 1.1 in)
Integrated cable length: 1.0 m
| 99.2 x 53.9 x 27.5 mm
(3.91 x 21.2 x 1.08 in)
Weight| .23 kg (.51 lb)| .237 kg (.52 lb)| .055 kg (.12 lb)
Connectors| Reverse SMA female| Reverse SMA female| Reverse SMA
Package Contents
| • Indoor 7 dBi Omni-directional Antenna with integrated cable – ANT2407
• Wall-mounting kit
• Installation guide and Warranty/support card
| • 5 dBi 3×3 Omni-directional Antenna – ANT32405
• Wall-mount kit
• Installation guide and Warranty/support card
| • Indoor 5 dBi Omni-directional Antenna ANT2405 (cable required, sold separately)
• Ceiling/wall-mount bracket
• Installation guide and Warranty/support card
Warranty| NETGEAR 2-year warranty| NETGEAR 2-year warranty| NETGEAR 2-year
warranty
Ordering Information (all regions)| ****
ANT2407-10000S
| ****
ANT32405-10000S
| ****
ANT2405
- Range estimation is based on FCC-compliant operation of two (2) 802.11 APs each with two (2) ANT24D18 antennas placed at 90 degree rotation, 5 m antenna cables, and lightning arrestors installed. With the antennas positioned 36 m above the ground, the data rate should sustain 1 Mbps under ideal line-of-sight conditions.
- Range estimation is based on the FCC-compliant operation of two (2)802.11 APs each with two (2) ANT2409 antennas, 1 m antenna cables, and lightning arrestors installed.With the antennas positioned 27 m above the ground, data rate should sustain 1 Mbps under ideal line-of-sight conditions.
- Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.
- Range estimation is based on the FCC-compliant operation of two (2) 802.11 APs each with two (2) ANT24D18 antennas, 3 m antenna cables, and lightning arrestors installed. With the antennas positioned 26 m above the ground, data rate should sustain 1 Mbps under ideal line-of-sight conditions.
Low-loss Antenna Cables
These 1.5 m, 5 m, and 10 m antenna cables offer low loss at 2.4 GHz and added flexibility for setting up access points at a greater distance from a power source. They come with reverse SMA connectors and provide a standard connection optimized for use with NETGEAR‘s line of WLAN antennas (range can be drastically reduced if longer or higher loss cables than these are used).
NETGEAR low-loss cables with 2 Reverse SMA Connectors extend the length between NETGEAR wireless access points or routers and the external antenna without sacrificing range.
| Part Number | ACC-10314-01 | ACC-10314-03 | ACC-10314-04 |
|---|---|---|---|
| Cable Length | 1.5 m (4.9 ft) | 5 m (16.4 ft) | 10 m (32.8 ft) |
| Maximum Cable Loss with Connectors | 1.4 dB | 3.7 dB | 7.0 dB |
| Weight | 50 g (1.76 oz) | 225 g (7.94 oz) | 440 g (15.53 oz) |
| Attneuation | 0.21 dB/ft maximum or .659 dB/m maximum at 2.5 GHz | ||
| Operating Temperature | -40° to 75° C (-40° to 167° F) | ||
| Minimum Ben Radius | 26 mm (1 in) | ||
| Connectors | Reverse SMA female (both ends) | ||
| Package Size | 450 x 280 x .12 mm (17.72 x 11.02 x .004 in) | ||
| Warranty | NETGEAR 2-year warranty | ||
| Ordering Information (all regions) | 1.5-meter cable ACC-10314-01 | 5-meter | |
| cable ACC-10314-03 | 10-meter cable ACC-10314-04 |
Support
- Address: 350 E Plumeria Dr. San Jose, CA 95134 USA
- Tell: 1-888-NETGEAR (638-4327)
- E-mail: info@NETGEAR.com
- Website: www.NETGEAR.com
Trademarks
2009 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, NETGEAR Digital Entertainer Logo, Connect with Innovation, FrontView, IntelliFi, PowerShift, ProSafe, ProSecure, RAIDar, RAIDiator, RangeMax, ReadyNAS, Smart Wizard, X RAID, and X RAID2, are trademarks and/or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved. This product comes with a limited warranty, the acceptance of which is a condition of sale. *Basic technical support is provided for 90 days from the date of purchase. †Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput and wireless coverage will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, network overhead, lower actual data throughput rate, and wireless coverage. NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future standards. This product has been tested for quality assurance and this product or its components may have been recycled.
FAQ’s
What is the gain of the NETGEAR ANT24D18 directional antenna?
The NETGEAR ANT24D18 directional antenna has a gain of 14 dBi (decibels isotropic).
What is the range of the ANT24D18 antenna?
The range of the ANT24D18 antenna depends on various factors such as the transmit power of the connected wireless device and the line of sight. Generally, directional antennas like this one can extend the range of your wireless network over longer distances in a specific direction.
Can I use the NETGEAR ANT24D18 with any Wi-Fi router or access point?
The NETGEAR ANT24D18 antenna is designed to work with wireless devices that have RP-SMA connectors. Before purchasing, ensure that your Wi-Fi router or access point has the compatible connector.
How do I install the ANT24D18 directional antenna?
The installation process typically involves mounting the antenna on a stable surface (e.g., wall or pole) using the included mounting kit. Refer to the product manual for detailed installation instructions.
Can the ANT24D18 antenna be used indoors and outdoors?
Yes, the NETGEAR ANT24D18 antenna is designed for both indoor and outdoor use. Its weather-resistant construction makes it suitable for outdoor installations.
What is the beamwidth of the ANT24D18 antenna?
The beamwidth of the ANT24D18 antenna is a measure of its coverage area. For this 14-dBi antenna, the beamwidth is typically around 30 degrees.
Does the ANT24D18 require any special configuration?
The ANT24D18 antenna is a passive device, meaning it doesn't require any configuration. Simply connect it to the compatible wireless device, and it will start improving the signal in the intended direction.
Can I use multiple ANT24D18 antennas to extend my network's coverage in different directions?
Yes, you can use multiple ANT24D18 antennas to create a point-to-point or point-to-multipoint wireless link, extending your network's coverage in various directions.
Will using the ANT24D18 antenna improve my Wi-Fi signal strength?
Yes, using a directional antenna like the ANT24D18 can improve signal strength and range in the direction it is pointed, compared to using the standard omni- directional antennas that come with most routers.
Can I adjust the direction of the ANT24D18 antenna after installation?
Yes, the antenna's mounting bracket usually allows for some degree of adjustment to fine-tune the antenna's direction for optimal performance.
Does the ANT24D18 antenna come with a cable for connection?
No, the ANT24D18 antenna typically does not come with a cable. You will need to purchase a compatible RP-SMA cable separately to connect it to your wireless device.
How can I troubleshoot if the antenna doesn't seem to be improving my Wi-Fi signal?
Ensure that the antenna is correctly installed and securely connected. Check the orientation and alignment of the antenna for the best signal reception. Additionally, verify that your wireless device supports external antenna connections and that it is configured properly.
References:NETGEAR ANT24D18 14-dBi Directional Antenna – Device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>