S10CNPY-5CCT-BZ LED Outdoor Commercial Canopy

“`html

LED Outdoor Commercial Canopy

Specifications:

• Model Number: S10CNPY/5CCT/BZ
• Usage: Outdoor Commercial Canopy Lighting
• Manufacturer: Feit Electric

Product Usage Instructions:

Safety Information:

For your safety, always remember to:

• Turn off the power supply at the fuse or circuit breaker box
  before you install the fixture.

• Ground the fixture to avoid potential electric shock and to
  ensure reliable starting.

• Double-check all connections to be sure they are tight and
  correct.

• Wear rubber soled shoes and work on a sturdy wooden
  ladder.

• Account for small parts and destroy packing material, as these
  may be hazardous to children.

WARNING: RISK OF SHOCK. House electric current
can cause painful shock or serious injury unless handled
properly.

CAUTION: Turn off the main power at the circuit
breaker before installing the fixture, in order to prevent possible
shock.

WARNING: Changes or modifications to this unit
not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

This fixture is designed for use in a circuit protected by a
fuse or circuit breaker. It is also designed to be installed in
accordance with local electrical codes. If you are unsure about
your wiring, consult a qualified electrician or local electrical
inspector, and check your local electrical code.

WARNING: RISK OF CUTS. Some metal parts in the
fixture may have sharp edges. To prevent cuts and scrapes, wear
gloves when handling the parts.

NOTICE: All electrical connections must be in
accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring
connections obtain the services of a qualified electrician.

Care and Maintenance:

Periodically clean the fixture and diffuser using a mild,
non-abrasive cleaner and soft cloth. When cleaning the fixture,
make sure the power is turned off. Do not spray cleaner directly
onto any part of the fixture or LEDs.

FAQ:

Q: What should I do if I encounter difficulties during

installation?

A: If you encounter any difficulties during installation, please
refer to the user manual provided with the product or contact Feit
Electric customer support for assistance.

Q: How can I ensure the longevity of the LED Outdoor Commercial

Canopy?

A: To ensure longevity, follow the care and maintenance
instructions provided in the user manual. Additionally, avoid
exposing the canopy to extreme weather conditions that it is not
rated for.

“`

Model #S10CNPY/5CCT/BZ
USE AND CARE GUIDE
LED OUTDOOR COMMERCIAL CANOPY
READ BEFORE INSTALLATION
SAVE THESE INSTRUCTIONS
THANK YOU We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this product. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Feit Electric!

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre- Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hardware Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Junction Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Surface Mount Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Color Select Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Safety Information

For your safety, always remember to:
Turn off the power supply at the fuse or circuit breaker box before you install the fixture.
Ground the fixture to avoid potential electric shock and to ensure reliable starting.
Double-check all connections to be sure they are tight and correct. Wear rubber soled shoes and work on a sturdy wooden ladder. Account for small parts and destroy packing
material, as these may be hazardous to children.

Product Specifications: · 120/277 VAC, 50/60Hz, 44 Watts · Dimmable with 0-10V dimmer only · Suitable for wet locations
WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly.
CAUTION: Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This fixture is designed for use in a circuit protected by a fuse or circuit breaker. It is also designed to be installed in accordance with local electrical codes. If you are unsure

WARNING: RISK OF CUTS. Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.

about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code.
Account for small parts and destroy packing material, as

NOTICE: All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.

these may be hazardous to children. Supplier’s Declaration of Conformity:

Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

47 CFR § 2.1077 Compliance Information Responsible Party: Feit Electric Company 4901 Gregg Road, Pico Rivera, CA 90660, USA 562-463-2852 Unique Identifier: S10CNPY/5CCT/BZ

FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Care and Maintenance

Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner and soft cloth. When cleaning the fixture, make sure the power is turned off. Do not spray cleaner directly onto any part of the fixture or LEDs.

Limited Warranty

This product is warrantied to be free from defects in workmanship and materials for up to 5 years from date of purchase. If the product fails within the warranty period, please contact Feit Electric at info@feit.com, visit feit.com/contact-us or call 1-866-326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

2

Pre-Installation
TOOLS REQUIRED (NOT INCLUDED)

Phillips

Drill

screwdriver

HARDWARE INCLUDED

15/64 in. Drill bit

NOTE: Hardware not shown to actual size.

AA

BB

CC

DD

EE

Part AA Canopy Fixture BB Mounting Bracket CC Wire Nuts DD Plastic Anchors EE

10 2 in. Wood Screws FF J-Box Mounting Screws

FF Description

Quantity 1 1 5 4 4 2

3 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Junction Mount Installation

1 Turning Off the Power
Turn the power OFF at the wall switch and fusebox or the circuit breaker.
2 Removing the Mounting Plate
Loosen the screw on the side of the Canopy Fixture (AA) and remove the Mounting Plate (BB).
BB

5 Locking the Canopy
Feed the wires into the J-Box. Lock the Canopy Fixture (AA) on to the Mounting Plate (BB) hooks.
BB
Lift Lock AA

AA

3 Installing the Mounting Plate
Make sure the power is off. Feed the power supply wires through the center of the Mounting Plate (BB).
Attach the Mounting Plate (BB) onto the Junction Box with the J-box Mounting Screws (FF).

6 Securing the Canopy
Tighten the screw on the side of the Canopy Fixture (AA) to lock the Canopy Fixture (AA) in place.
AA

BB

FF

4 Hanging the Canopy
Hang the Canopy Fixture (AA) on the Mounting Plate (BB).
Connect the Canopy Fixture (AA) wires to the power supply wires. See wiring diagram A or diagram B on page 6. AA

NOTE: Purple and Pink wires to be used with 0-10V dimmers only (purple +10V, pink -10V).

BB
0-10V dimmer wire conductors

7 Waterproof Seal
To prevent water or moisture from entering the fixture between the fixture and mounting surface, waterproof silicon, caulk or gel should be applied to seal any gaps around the junction point.
8 Turning On the Power
Turn power back on at the wall switch, circuit breaker or fusebox.

4

Surface Mount Installation

1 Turning Off the Power
Turn the power OFF at the wall switch and fusebox or the circuit breaker.
2 Removing the Mounting Plate
Loosen the screw on the side of the Canopy Fixture (AA) and remove the Mounting Plate (BB).

5 Locking the Canopy
Add caulking on the opened holes of the gasket where the wires were passing through. Lock the Canopy Fixture (AA) on to the Mounting Plate (BB) hooks.
BB
AA

BB

6 Securing the Canopy

AA

Tighten the screw on the side of the Canopy Fixture (AA)

to lock the Canopy Fixture (AA) in place.

3 Installing the Mounting Plate
Position the Mounting Plate (BB) and mark the locations for 4 Wood Screws. Drill holes with a 15/64 in. drill bit and insert the Plastic Anchors (DD).
Attach the Mounting Plate (BB) by securing 4 Wood Screws (EE) to the Plastic Anchors (DD).
DD
BB EE

AA
7 Connecting to a Power Source
Make sure power is off. Remove the 1/2 inch plug from the direction you intend to feed the conduit. Connect the power supply wires to the fixture.
See wiring diagram A or diagram B on page 6.

4 Disassembling the Canopy
Disassemble the canopy (AA) fixture by using a phillips screwdriver to loosen the eight crews holding the diffuser lens. Remove the diffuser lens and the reflector from the fixture, then pull the wires (black, white, purple, pink, and green-yellow or green) into the fixture’s cavity.

AA

Reflector Diffuser Lens

Remove screws
(x8)

Conduit Pipe
8 Re-assembling the Canopy
Assemble the reflector and diffuser lens back on the canopy (AA) fixture.

AA
Reflector Diffuser Lens
Install screws (x8)

Conduit Pipe

5 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Surface Mount Installation (continued)

9 Waterproof Seal
To prevent water or moisture from entering the fixture between the fixture and mounting surface, waterproof silicon, caulk or gel should be applied to seal any gaps around the junction point.

10 Turning On the Power
Turn power back on at the wall switch, circuit breaker or fusebox.

Wiring for a Standard Wall Switch

WIRING DIAGRAM A
Twist-on wire connector

Supply Line (Black) Supply Neutral (White) Supply Grounding (Green or Green/Yellow)

Line (Black) Neutral (White)

LED DRIVER

J-Box Grounding (Green or Bare)

Connector to LED

Wiring for 0-10V Dimmer

WIRING DIAGRAM B

Twist-on wire connector

Supply Line (Black) Supply Neutral (White) 0-10V Dimmer

Line (Black) Neutral (White) Purple (+10V)
Pink (-10V)

LED DRIVER

Connector to LED

Supply Grounding (Green or Green/Yellow)

J-Box Grounding (Green or Bare)

6

Color Select Switch
Slide the Color Temperature switch to point to either 3K, 3.5K, 4K, 5K, 6.5K. 3K (3000K) ­ Soft White 3.5K (3500K) ­ Neutral White 4K (4000K) ­ Bright White 5K (5000K) ­ Daylight 6.5K (6500K) ­ Daylight Deluxe
Troubleshooting

– 3K – 3.5K – 4K – 5K – 6.5K CCT

Problem

Possible Cause

Corrective Action

The power is off.

Make sure the power supply is on.

The light will not illuminate.

There is a faulty wire connection.

Check the wiring. Contact a qualified and licensed electrician if you are not comfortable troubleshooting wiring problems.

There is a faulty wire switch.

Test or replace the switch.

7 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

References

• Contact Us - Feit Electric
• Energy Saving Light Bulbs, Light Fixtures | CFL, LED & More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>