ARESGAME Agv500 500W Power Supply User Manual
- August 17, 2024
- ARESGAME
Table of Contents
ARESGAME Agv500 500W Power Supply
Components
- Power Supply
- Screws x4
- User Manual
- AC Power Cord
- Cable Ties x4
Introduction
Thank you for purchasing an ARESGAME AGV500 80 PLUS*™ Bronze certified power supply. This high-quality product takes gamers’ needs as the primary design consideration and focuses on a cost-effective market. It is equipped with a 120mm hydraulic bearing silent fan to help dissipate the heat under a heavy load while maintaining a quiet performance. The AGV series is the best choice for stability and durability.
Safety Instructions & Disclaimer
- Please install following the instructions and installation guide. Incorrect installation may result in damage to the power supply or system components which may lead to serious injury.
- Unauthorized non-professionals are strictly prohibited from disassembling the power supply. Unauthorized disassembly of this product will invalidate the ARESGAME warranty.
- Only use the supplied cable or the original cable of the corresponding model purchased directly from the ARESGAME official store. Using incorrect cables may cause product disfunction which may lead to fire and damage. Likewise, if the power supply needs to connect to modular cables, use only cables that are specifically designed to be compatible with your specific power supply model. Using other cables may not be compatible with the leads and may result in serious damage to the system and power supply.
- Do not place this product close to any source of heat such as radiators, heater holes.
- Keep the interior of the PC Case clean and maintain appropriate heat dissipation condition for the power supply.
- It is not recommended to overload the power supply.
- Use power strips that meet safety standards to avoid short circuits.
- This power supply can only be used to power the PC, and it is not suitable to use for other purposes.
- To ensure the stable operation of the PC system and the maximum service life of the power supply, please be clear about the power required by your PC and other accessories in advance. it is recommended to reserve 15-20% of the power margin for the selected power supply, which should not be lower than the power recommended by the official accessories.
- For those unauthorized ARESGAME power supplies purchased through unofficial channels, ARESGAME do not assume any after-sales responsibility. (State: For ARESGAME power supplies sold by authorized distributors and agents, please contact the agent seller directly to deal with related after-sales issues.)
- For the additional services, accessories and gifts promised by the distributors and agents themselves, the original distributors and agents are responsible for them.
- For products that are not covered by the warranty, ARESGAME will not be responsible for any services. Counterfeit products are also not covered by the warranty.
Exclusion Clauses
The warranty of this product does not cover problems or damage caused by the
following reasons, including but not limited to:
-
The product’s faulty parts have exceeded the free warranty period.
-
Failure or damage caused by the use of pirated or other unauthorized software, non-standard or unpublished software.
-
Wear and tear by normal use. Damage caused by changes in the appearance of the product (accidental or otherwise), but does not affect on the operation and performance of the product, including but not limited to rust, color change, texture decoration, natural wear and the gradual aging of the product, such as normal LED lights weakened or dimmed due to use or wear.
-
Any damage caused by modification, accident, disassembly, improper use or unauthorized repair.
Any damage caused by improper installation, operation, cleaning, including all behaviors that do not follow the product instructions. -
Damage caused by force majeure such as natural disasters (including but not limited to earthquakes, floods, rainstorms, typhoons, lightning strikes, fires).
-
Damage caused by war, terrorist activity, nuclear accident.
-
Failure or damage caused by accidental factors or human factors (including but not limited to computer viruses, operating errors, fluid, scratches, handling, bumps, improper moves of the plug, foreign objects, rodents, pests, etc.) |
Product Features
-
STABLE POWER
The AGV500 has outstanding electrical performance with an ultra-stable voltage and extremely clean power output. This can help you achieve the highest possible overclock, if desired, and provide very stable and reliable power to all components. The AGV500 also provides up to 85% efficiency for 115VAC and 88% efficiency for 220VAC-240VAC and is 80 PLUS™ Bronze certified. -
TOP QUALITY PROTECTIONS
The AGV500 comes equipped with the most comprehensive protection possible, including Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), and Short Circuit Protection (SCP). This product is also covered by a 5-year warranty and ARESGAME’s legendary customer service and support.
Installation
-
Remove your existing power supply and cables, if you have not yet done so.
-
Take out the new power supply from its packaging
-
Use the four screws provided in the package contents to install the power supply into your computer.
NOTE : It is recommended to install the power supply with the fan facing downwards. However, if your case places the power supply at the bottom of the case and there are no ventilation holes available, it may be best to install the power supply with the fan facing upwards for greater efficiency and reliability. -
Connect the Main Power Connector (20+4 Pin) AT cable to the motherboard.
-
Connect the appropriate CPU Power Connector (4 Pin, 8 Pin, 8+4 Pin, or 8+8 Pin EPS-12V) to the motherboard.
-
Connect the 6/6+2 Pin PCI-E cables to your graphics card(s). NOTE: The 8 Pin connector can be split into a 6+2 Pin. Do not attempt to plug an 8-pin PCI-E cable into a 6-pin connector without first detaching the two extra pins.
-
Connect the SATA power cables to all data drives or optical drives (e.g. hard drives, solid state drives, optical drives).
-
Connect the 4 Pin Molex Peripheral connectors for fans, pumps, legacy components, and other devices and adapters.
-
Connect the AC power cord to your power supply and to the wall outlet. Check all connections to ensure a solid connection. Turn the power switch on the power supply to the ON position.
Technical Specifications
Cable Specifications
Output Specification
- Dimensions:
- 85mm (H) x 150mm(W) x 140mm (L)
- 3.3″ (H) x 5.9″ (W) x 5.5* (L)
- Protections:
Over Voltage Protection (OVP), Under Voltage Protection(UVP), Short Circuit Protection(SCP), Over Power Protection(OPP) |
Total Protection
-
Over Voltage Protection
Voltage Source| Protection Point
---|---
+3.3V| 3.76V – 4.3V
+5V| 5.74V – 7.0V
+12V| 13.4V – 15.6V -
Over Power Protection
Protection at 110%-150% full load -
Short Circuit Protection
Activated when any DC rails short-circuited
Environments
| Condition | Operation | Storage |
|---|---|---|
| Ambient Temperature | 10°C to 45°C / 50°F to 113°F | -40°C to 70°C / -40°F |
to 158°F
Ambient Humidity| 5% – 85% RH| 5% – 95% RH
Troubleshooting
If the power supply does not work properly, please refer to the troubleshooting steps below:
- Verify that the power cord is properly plugged into the AC outlet and the power supply.
- Verify that the “I/O” switch on the power supply is in the “I” position.
- Verify that all power connectors are properly connected to each device.
- If you have a UPS device connected, verify that is it turned on and plugged in.
Should you require further assistance, please do not hesitate to email us at: support@aresgame.com
FAQs
What is the efficiency rating of the ARESGAME AGV500 500W Power Supply?
The ARESGAME AGV500 500W Power Supply is 80 PLUS Bronze certified, meaning it operates with at least 85% efficiency under typical loads.
What type of fan is used in the ARESGAME AGV500 500W Power Supply?
The ARESGAME AGV500 500W Power Supply is equipped with a silent 120mm hydraulic bearing fan designed for quiet operation and effective cooling.
What protections are included in the ARESGAME AGV500 500W Power Supply?
The ARESGAME AGV500 500W Power Supply includes Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), and Short Circuit Protection (SCP).
What is the form factor of the ARESGAME AGV500 500W Power Supply?
The ARESGAME AGV500 500W Power Supply has an ATX form factor, making it compatible with most desktop cases.
What is the noise level of the ARESGAME AGV500 500W Power Supply under full load?
The ARESGAME AGV500 500W Power Supply operates with a noise level of under 25dB, even under full load, thanks to its intelligent fan control.
What kind of cables does the ARESGAME AGV500 500W Power Supply include?
The ARESGAME AGV500 500W Power Supply includes black cables, designed for a clean and organized look without the “ketchup and mustard” color scheme.
The ARESGAME AGV500 500W Power Supply offers stable output voltages, providing consistent and reliable power delivery to all connected components.
What is the size of the ARESGAME AGV500 500W Power Supply?
The ARESGAME AGV500 500W Power Supply has dimensions of 5.9 x 5.5 x 3.3 inches, making it compact enough to fit in most cases.
How does the ARESGAME AGV500 500W Power Supply handle heat dissipation?
The ARESGAME AGV500 500W Power Supply features a honeycomb ventilation design, combined with a 120mm fan, to enhance heat dissipation.
What input voltage range does the ARESGAME AGV500 500W Power Supply support?
The ARESGAME AGV500 500W Power Supply supports an input voltage range of 100V to 240V AC, making it versatile for different regions.
What makes the ARESGAME AGV500 500W Power Supply a popular choice among users?
The ARESGAME AGV500 500W Power Supply is popular due to its balance of affordability, high performance, energy efficiency, and reliable protection features.
Download this Manual:ARESGAME Agv500 500W Power Supply User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>