MLOVE P3 Outdoor Speaker User Manual
- August 19, 2024
- MLOVE
Table of Contents
MLOVE P3 Outdoor Speaker
Specifications
- Speaker driver: 50x50mm square full range driver x 2
- Passive Radiator: 2.5-inch passive radiator x 2
- Charging Interface: USB Type-C
- Power Input: DC5V-1A
- Play Modes: Bluetooth / Micro SD Card / USB-C Audio Input
- Supported Audio Formats: MP3 / WMA / WAV / FLAC / APE (Micro SD card)
- Product Size: W198.50 x H81.76 x D90.44mm
Precautions
Ensure proper power input (DC5V-1A) for charging.
Packing List
- Bluetooth Speaker
- USB Power / Data Cable
- User Manual
Buttons Introduction
- Volume Up: Press to increase volume, hold for Next Song
- Play / Pause: Press to play or pause music
- Volume Down: Press to decrease volume, hold for Previous Song
- Power Indicator: Red during charging, white when fully charged
- Battery Low: Red light flashes slowly when battery is below 10%
- Power: Hold for 2s to turn on/off
- Reset: Hold for 5s to reset
- Light Control: Press to change light mode
Interfaces Introduction
- Micro SD Card Play: Turn on speaker, insert card for automatic music play
- Charging: Use DC5V-1A adapter or USB port for charging
- USB-C Audio Input: Connect to PC or phone, press M to enter audio input mode
Bluetooth Connection
Enter Bluetooth Mode: Hold M for 2s, pair with mobile devices
TWS Feature: Pair master and slave speakers for TWS function
FAQs
How do I disconnect Bluetooth and remove paired records?
Press and hold M for 5s to disconnect and remove paired records.
How many devices are supported for Bluetooth connection?
The device supports connecting two devices simultaneously.
Playing Mode:
Press to switch playing mode,
Bluetooth I TF card I USB-C audio input
· Bluetooth is default mode
Bluetooth Mode: Press and hold for2s to enter Bluetooth pairing mode (two devices connection supported), press and hold for Ss to disconnect Bluetooth and remove paired record
lnterfaces Introduction
English
Micro SD Card Play Turn on the speaker, insert Micro SD card, music play
automatically
Charging DC5V-1A (over) adapter or USB port of PC
USB-C Audio Input Turn on the speaker, connected to pc or phone, press “M” to
enter USB-C audio input model.Enter Bluetooth Mode Turn on the speaker, press
and hold “M” for 2s, indicator flashes rapidly, Bluetooth is ready to pair
2.Connected to Mobile Devices Turn on Bluetooth of mobile devices, find “Mlove
P3″ in
l.Master Speaker Initiating Connection Command Select a speaker, turn on and
switch to Bluetooth mode to start. Press”+” and ·-· at the same time, prompt
sound heared, speaker enters TWS pairing mode and search slave speaker
automatically.
2.Siave Speaker Connection Turn on the slave speaker, make sure it in
Bluetooth mode and hasn’t been connected to other devices.
J.TWS Paired Successfully Prompt sound heared when TWS paired successfully,
indicators of master and slave speakers
Other Tips: 01. Press and hold “M” for 5s to disconnect Bluetooth and remove paired record 02. Two devices connection supported
Slave Speaker
4.Quit TWS Connection Press”+” and”-” atthesametimetoexit.
Other Tips: 01. Master speaker is left channel, slave speaker is right channel
02. TWS function only works between 2 speakers 03. In the TWS function,
operate the buttons on one speaker will synchronously change the settings on
the other.
DJJ Specification
Speaker driver: Passive Radiator: Charging Interface: Power Input: Play Modes: Supported audio Formats: Product Size:
50x50mm square full range driverx2
2.5 inch passive radiatorx2
USB Type-c DC5V-1A
Bluetooth I Micro SD Card I USB-C Audio Input MP3 I WMA I WAV I FLAC I APE (
Micro SD card )
W198.50 X HBl. 76 X D90.44mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>