MCONFORT Deco Fresh Box User Manual

MCONFORT Deco Fresh Box

Product Information

Specifications

• Brand: MCONFORT DECO
• Type: Evaporative Air Conditioner
• Main Function: Ventilate and Cool Air
• Cooling Method: Evaporative Cooling
• Filter Type: Cellulose Filters
• Water Tank Capacity: Not specified

Product Usage Instructions

1. Introduction to Evaporative Cooling
   The main objective of evaporative air conditioners is to increase the comfort level of any space naturally and efficiently. To make the most out of this equipment, it is important to understand how evaporative cooling works.

2. Ventilate and Refresh
   In hot months, achieving thermal comfort is essential. An evaporative air conditioner ventilates and refreshes the air, creating a comfortable environment. It performs two key tasks: ventilate and cool.

3. How Evaporative Cooling Works
   Evaporative coolers work by passing air through cooling filters soaked with water. As the air captures moisture, its temperature decreases, converting hot, dry air into cooler, more humid air. This process also helps purify the air and improve air quality.

4. Factors Affecting Cooling Capacity
   The cooling capacity depends on ambient temperature and humidity levels. Higher temperatures and lower humidity lead to greater cooling capacity. Correct usage will help achieve thermal comfort in most cases.

FAQ – Frequently Asked Questions

• Q: How often should I clean the cellulose filters?
  A: It is recommended to clean the cellulose filters every 2-3 weeks to maintain optimal performance.

• Q: What should I do if the water tank runs out?
  A: Refill the water tank with clean water to ensure continuous operation of the evaporative cooler.

Dear Customer:
We want to thank the trust placed in us and welcome you to the comfort and convenience that your MCONFORT device will shortly provide. We remain at your disposal to answer any questions about the characteristics and operation of your equipment. We hope you enjoy the benefits of your MCONFORT device. We are a quality brand that takes care of details and seeks the highest customer satisfaction.

Yours sincerely:

INTRODUCTION TO EVAPORATIVE COOLING

The main target of evaporative air conditioners is to increase the comfort level of any space naturally and efficiently. To get the most out of this type of equipment, you should read this introduction to evaporative cooling.

THERMAL COMFORT ZONE
Our level of comfort is directly related to the ambient temperature and humidity. In general, we can say that people perceive a sensation of thermal comfort when the environmental conditions are within what we call a “thermal comfort zone”. This zone corresponds to the temperature range between 18º and 30ºC and a relative humidity of between 30 and 70% approximately.

In addition to influencing comfort, humidity, and temperature are even capable of influencing factors such as our productivity and our level of attention, so thermal comfort is an element to be taken into account not only in our homes but in our workspace.

VENTILATE AND REFRESH. WHY?
In the hottest months of the year, usually happens is that we need to lower the air temperature to reach our thermal comfort zone, and to achieve this, a very efficient solution is the use of an EVAPORATIVE AIR CONDITIONER, which performs two fundamental tasks: ventilate and refresh.

Ventilate: the thermal sensation of the air that surrounds us depends on its speed. That is, a current of air gives us a lower sensation of temperature than calm air.

That is why on many occasions a simple fan is capable of relieving us from the sensation of heat. But, what if in addition to moving the air, we managed to cool it? This is exactly what an evaporative cooler does! Ventilate and cool the air through evaporative cooling.

EVAPORATIVE COOLING.

Evaporative air conditioners use the natural principle of water evaporation to produce fresh air: dry air naturally decreases its temperature if we increase its humidity. This phenomenon is the same that occurs, for example, on the shores of the sea or a river, where the wind that comes into contact with the water becomes a breeze capable of refreshing us. This principle is very interesting because it is not necessary to spend energy to humidify the air, rather it is something that we can achieve naturally, and this makes the energy consumption of an evaporative cooler equivalent to that of a fan.

Evaporative coolers work by passing a flow of air through cooling filters, which are soaked with water and the air captures moisture and reduces its tempera-ture as it passes through them. They convert hot, dry air into cooler, more humid air. In addition, the fact that they filter the air serves to purify the envi-ronment and improve air quality.

The cooling capacity of this equipment will always depend on the ambient temperature and humidity conditions. If the temperature is high and the humidity is low, we will obtain a greater cooling capacity. If the temperature is not very high or there is a lot of humidity, the performance will be lower. In any case, using the air conditioner correctly will serve to reach the thermal comfort zone in the vast majority of cases.

We must always use the air conditioners in ventilated spaces so that the equip-ment can be constantly fed with new air. We must also direct the airflow towards where we are located to take advantage of the refreshing effect produced by fresh air on one hand, and moving air on the other.

We should not use this equipment in closed rooms, since we will obtain the opposite effect: the air will be saturated with humidity, and the sensation of heat and overwhelm will increase.

GENERAL RECOMMENDATIONS

Evaporative coolers work by passing a flow of air through cooling filters, which are saturated with water so that by increasing their relative humidity they lower the air’s temperature. They convert hot, dry air into cool, humid air. In addition, the fact that they filter the air serves to purify the atmosphere and improve air quality.

To achieve maximum cooling and air quality, consider the following recommendations:

1. Use the equipment in well-ventilated places. If used in a confined or poorly ventilated space, the performance of the equipment may be greatly reduced and it will be very difficult to lower the air tempera-ture.
2. Try to place the equipment with your back to an open door or window, so that as much new air as possible entering the room passes through our equipment. This will increase the performance of the equipment and improve the quality of the air we breathe.
3. Keep equipment filters clean. The cleaner they are, the more cooling and air-filtering power our equipment will have.
4. Change the water in the tank as soon as you detect that it contains dirt. Part of the airborne particles passing through the filters can end up in the water tank. Using equipment with dirty water decreases performance, worsens air quality, and can create operational problems.
5. Before storing the equipment, make sure the filters and the reservoir are clean and dry.
6. Do not put any liquid into the reservoir other than water. Mixing chemicals with water can endanger the health of people, animals, and plants, as well as damage the cooling filters.

MAIN COMPONENTS

Device main components:

1. CONTROL PANEL
2. AIR OUTLET
3. OSCILLATING GRILLE
4. FILLING HATCH
5. WATER LEVEL DISPLAY
6. HANDLE
7. REAR PREFILTER
8. REAR FILTERS
9. DRAIN VALVE

TECHNICAL SPECIFICATIONS

SAFETY WARNINGS

1. Please read the user’s manual carefully before use.
2. This product is only applicable to 220-240V, 50 Hz, AC power supply. Stop operating this air cooler immediately if it works abnormally and contact the technical service center. The user must not unassemble or repair the machine.
3. If the power cord is damaged, it must be replaced only by the manu-facturer or technical service center.
4. The power cord shall not be scratched, damaged, over-bent, pulled, twisted, or pressed with heavy objects, otherwise, it may cause electric shock, short circuit, and fire.
5. This machine must not be placed in a place accessible to children. Children must not use the machine. Children shall not play with the appliance.
6. Please do not insert your hand or any object into air outlets, or filters.
7. The machine should not be placed on uneven surfaces, do not leave screws or other miscellaneous items in the fan. There should be no curtains or anything like that behind the fan.
8. Do not cover this appliance when it’s working.
9. Please place the machine on a horizontal surface for use, so as not to fall and damage the internal components.
10. This appliance is for indoor or protected outdoor use only. Protect the equipment from wet floors, splashes of water, rain, and direct exposure to sunlight.
11. Do not use the machine around the bathroom, swimming pool, or wet places. This product should not be immersed in water under any circumstances.
12. When the machine is running, it is forbidden to block the air outlet and the air inlet through the filter part.
13. Do not permit the area around the unit to become damp. If dampness occurs, turn the speed of the unit down. If the unit speed cannot be turned down, use the unit intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.
14. The water level in the tank must always be between the MIN and MAX marks.
15. Do not tip or overturn the equipment. If this happens with water inside, immediately disconnect it from the electrical network. Do not plug it back in until it is completely dry.
16. Please keep the device filters and water tank clean.
17. Unplug the appliance during filling and cleaning.
18. To prolong the product’s life, please do not use it in extremely hot, damp, or places with oil and dust, and do not use it beside the fire or inflammable articles, to avoid fire.
19. Never leave water in the tank when the machine is not in use. Empty, clean, and dry the machine before storage.
20. Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
21. Do not ingest battery, Chemical Burn Hazard. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
22. If the battery compartment does not close securely, stop using the product and keep it away from children.
23. Keep new and used batteries away from children.
24. The remote controller should be used properly. Avoid shocks or water immersion. Pay attention to the polarity when installing the battery.
25. The batteries contain materials that are hazardous to the environment; they must be removed from the appliance before it is scrapped and disposed of safely.

USE INSTRUCTIONS

FIRST STEPS:

1. Take the equipment out of its packaging and check that all the parts are there: air cooler, remote control, and user manual.

2. Connect the equipment to a power outlet with the appropriate voltage. The device will beep and go into Stand-by mode.
   Notes:

   • To avoid a short circuit, do not plug/unplug the equipment with wet hands.
   • Make sure that the plug is securely plugged into its housing.

3. To fill the water tank, use the front hatch following the following recommendations:

   • The water level in the tank must be maintained between the MAX and MIN marks on the display. Avoid overfilling.
   • It is possible that, after a few hours of use, the water in the tank takes on a certain odor/color. If so, it is recommended to change the water and clean the tank more frequently.

CONTROL FUNCTIONS:

1. ON/OFF: In Stand-by mode, press this button and the fan will start. Press again if you want it to turn off immediately.
2. SPEED: Press this button to select the fan speed, in sequence LOW-ME-DIUM-HIGH-LOW. The light corresponding to the selected speed will illuminate. The engine takes about 5 seconds to start on the first ignition.
3. SWING: This equipment has automatic horizontal movement of the grilles. Press the button to activate movement and press again to lock the louvers in any position.
4. COOL: Press to activate/deactivate the evaporative cooling function.
   • In COOL mode, the cooler activates the water pump and, through the natural principle of water evaporation, generates fresh and clean air.
   • If the fan speed is high, when COOL is pressed, the fan will drop to LOW speed for 30 seconds before resuming the speed previously set.
5. TIMER: Activates the device’s auto-shutdown function. You can select between 1, 2, 4, 8 and 10 hours.
6. MOSQUITO: Activates the insect repellent using ultrasound.

CLEANING AND MAINTENANCE

ALWAYS unplug the power cord before maintenance.

EQUIPMENT CLEANING:
Clean the surface of the appliance with a soft damp cloth and dry it with a dry cloth. Do not allow water to fall inside the machine. Please note that the surface should not be polished with sandpaper, waxed, or cleaned with gasoline, acid, alkali, benzene, and other organic solvents to avoid discoloration and deterioration.

PRE-FILTER CLEANING: (fig.1, fig2)
The pre-filter can be easily removed with the help of a screwdriver. It is cleaned by brushing it with a soft brush or placing it under a tap of water until the deposited dirt is removed.

FILTER CLEANING: (fig.3)
The filters are located at the rear of the equipment and are removed easily and without tools. They are cleaned by brushing them with a soft brush or placing them under a tap of water until the deposited dirt is removed.

CLEANING THE WATER TANK: (fig.4, fig.5)
It is advisable to regularly clean the water tank. We must prevent traces of lime and impurities from accumulating and empty them when we are not going to use the equipment. We can remove the drain plug to drain it. It is advisable to be careful with the water pump so as not to damage it.

TROUBLESHOOTING

PROBLEM

| POSSIBLE CAUSE|

SOLUTIONS

---|---|---
The device does not work.| There is no electrical current.| Check that the power cord is plugged in.
Check the power supply.
Press ON/OFF.
There is no airflow.| Damaged engine.
Blockage in the grid or filters.| Contact Technical Service. Clean equipment.
The device isn’t cooling.| Low water level.
Damaged water pump.
The filter is dirty.
There is too much humidity in the environment.| Fill the water tank. Contact Technical Service. Clean equipment.

You can use the computer as a fan.

Bad smell.| The water or the filter is dirty.| Change water or clean equipment.
Increasing hot sensation in the room.| There is no air renewal and the relative humidity is getting too high.| Make sure that the room is well- ventilated and the equipment can constantly receive fresh air.

TECHNICAL SERVICE

• In MCONFORT we will be happy to solve any incident that may occur in your device, as well as to solve all the doubts that may arise regarding it.
• Please contact us through the following channels:
  • e-mail sat@mconfort.com
  • telephone +34 961 536 720

ENVIRONMENTAL PROTECTION

• Thanks to the classified disposal of waste we can take care of the environment and reuse valuable materials.
• Dispose of the device and its packaging by environmental regulations.
  • Packaging materials can be recycled, so it is recommended to dispose of them in classified trash.
  • By Directive 2012/19/EU, this symbol requires the separate disposal of waste electrical and electronic equipment. Do not dispose of this appliance in unsorted rubbish but at a specific collection point. Electronic devices may contain substances dangerous to the environment.
  • We hereby confirm that this article meets the basic require-ments, regulations, and directives of the EU. You can request a detailed declaration of conformity at any time by contacting us.

PRODUCT WARRANTY

Warranty period:

1. The guarantee applies to the product lines of Evaporative Coolers, Humidifiers, Heaters, and Heating Mats supplied under the MCONFORT brand.
2. The warranty period is 2 years, counted from the date of sale.
3. MCONFORT will provide technical assistance at your convenience at the customer’s home, will pick up the equipment to repair it at its facilities, or will indicate to the customer the closest TAS where to deliver the equipment for repair.

Requirements for the validity of the guarantee:

1. This guarantee applies only to the Spanish national territory.
2. The equipment must have been used by the instructions detailed in the user manual.
3. Only the MCONFORT-authorized technical service can cover the guarantee.
4. The document that validates the guarantee and that in turn indicates the beginning of it will be the PURCHASE INVOICE.

Warranty coverage:

1. This guarantee does not affect the rights available to the user by the provisions of RDL 1/2007.
2. By title V of RDL 1/2007, the user shall have the right to demand the repair and/or replacement of the product from the seller, and/or the producer in the cases determined by law.
3. During the time that the equipment repair lasts, no amount will be paid for damages for the time the equipment has been out of service.
4. We are not responsible for any damage that the equipment may cause to external elements.

Warranty Exclusions:

1. Failure to comply with any of the aforementioned requirements.
2. When the use that has been given to the equipment was not exclusively domestic.
3. The guarantee does not cover accessories or complements added to the equipment.
4. Demonstrations or start-up of equipment.
5. If the failure is caused by fire, flood, meteorological agents, shock, or application of inadequate electrical supply.
6. Damage due to mistreatment, including transport damage, must be claimed from the transport company. It is advisable to inspect the packages received in the presence of the transport company’s personnel, before signing the delivery note by receipt.
7. Breakdowns caused by physical breakage in casings or plastics.
8. The use of non-original MCONFORT spare parts.
9. Breakdowns caused by misuse.
10. Equipment that does not have the manufacturing serial number or that has been altered or erased.
11. When the equipment has been manipulated or repaired by personnel outside or not authorized by MCONFORT.
12. Equipment maintenance and cleaning work
13. Breakdowns caused by wear or normal use of the equipment, such as blockage of filters or drains.

Mconfort

• sat@mconfort.com
• +34 961 536 720
• C/ Alcalaten nº 16, Polígono Industrial La Cova. 46940 – Manises, Valencia. SPAIN
• mconfort.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>