Danfoss VICUQ24M Icon Programmable II Room Thermostat Installation Guide
- August 17, 2024
- Danfoss
Table of Contents
Danfoss VICUQ24M Icon Programmable II Room Thermostat
Specifications
- Model: IconTM Programmable II
- Power Supply: 220-240V, 50-60 Hz
- Maximum Power Consumption: 10W
- Compatible with up to 5 x Danfoss TWA actuators (1.5 mm2 each)
Installation
Follow the installation steps as shown in Figures 1 to 6 in the user manual.
Initial Setup
After the first connection, if the date and time are not set, the display will flash. Set the date and time using the provided buttons for year, month, day, hour, and minute. Confirm the settings.
Default Configuration
The default setup includes heavy floor installation with NC actuators and program P0, ensuring a comfortable temperature without further adjustments.
Changing Settings
To change the program, refer to the user manual. For adjusting settings, refer to the Advanced Functions section on the next page.
FAQs
Q: How do I change the program settings?
A: To change the program, consult the user manual for detailed instructions on
programming changes.
Q: What should I do if the date and time are not set after the initial
connection?
A: If the date and time are not set after the initial connection, use the
provided buttons to set the correct date and time and confirm the settings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>