sentiotec 1-053-313, S-WIFI01 MySentio WiFi Instruction Manual

sentiotec 1-053-313, S-WIFI01 MySentio WiFi

Product Information

Specifications

• Product Name: MySentio WiFi
• Model: 1-053-313 / S-WIFI01
• Languages: English, German, French, Italian, Dutch, Swedish, Finnish, Czech, Polish
• Version: 01/24
• Ident no.: 1-053-313

Product Description

Commissioning
After installation, proceed with the commissioning process to ensure the device is set up correctly.

Operation
Access the home menu to navigate through different options. Adjust settings, device configurations, colored light settings, and manage profiles as needed.

Troubleshooting
Refer to the troubleshooting section in case of any issues encountered during operation for guidance on resolving common problems.

Maintenance
Regular maintenance is essential to ensure optimal performance of the MySentio WiFi device. Follow maintenance guidelines provided in the manual.

Disposal
When disposing of the device, follow the recommended disposal methods to minimize environmental impact.

Technical Data
Refer to the technical data section for detailed information on specifications, requirements, and limitations of the product.

Instructions for Installation and Use
For detailed instructions on installation and usage, refer to the manual provided with the MySentio WiFi device.

Frequently Asked Questions (FAQ)
Q: What is the intended use of the MySentio WiFi?
A: The MySentio WiFi is designed for remote control of saunas.

About this instruction manual

Read these instructions for installation and use carefully and keep them within reach of the device. This ensures that you can refer to information on safety and operation at any time.
These installation and operating instructions can also be found in the downloads section of our website: www.sentiotec.com/downloads.

Symbols used for warning notices
In these instructions for installation and use, a warning notice located next to an activity indicates that this activity poses a risk. Always observe the warning notices. This prevents damage to property and injuries.

ATTENTION!
This keyword is a warning that damage to property can occur.

Other symbols
This symbol indicates tips and useful information.

Important information for your safety

Intended use
Sentiotec WiFi is used to control the sauna remotely.
A sauna heater controlled by the remote start function of the sauna control unit must pass the combustion test as specified in EN 60335-2-53 paragraph 19.101. If the heater does not meet this requirement, an appropriate safety precaution must be used (for example: safety switch-off or door monitoring)
Any use exceeding this scope is considered improper use. Improper use can result in damage to the product, severe injuries or death.

Safety information for the installer

• Installation and connection work on the devices may only be carried out with the power supply disconnected.
• Observe the installation instructions for the sauna control unit used.
• Also comply with the regulations applicable at the installation location.
• For your own safety, consult your supplier in the event of problems that are not explained in sufficient detail in the installation instructions.

Safety information for the user

• The WiFi must not be used by children under 8 years of age.
• The WiFi may only be used by children over 8 years of age, by persons with limited psychological, sensory or mental capabilities or by persons with a lack of experience/knowledge under the following conditions:
  • They are supervised.
  • They have been shown how to use the device safely and are aware of the hazards that could occur.
• Observe the operating instructions for the sauna control unit used.
• For your own safety, consult your supplier in the event of problems that are not described in sufficient detail in the operating instructions.

Product Description

Scope of delivery

• MySentio WiFi
• 1 pc. 1 m Ethernet cable, 8-pin RJ45
• Installation material
• Assembly instructions

Optional accessories

• Home door sensor (1-052-723 / SAB00103)
• Safety shutdown (SFE-xx)

Product Features
Sentiotec WiFi enables the functions of all existing sauna control units to be operated using devices such as smartphones and tablets. This is done using the MySentio app in a local network (WiFi), which is available free of charge for Android (Google Play Store) and for iOS (App Store). The subscription is free of charge for 3 years, after which fees may apply.
Compatible sauna control units:

• home.com4 RS485 (1-052-984 / HC4-B-RS485)
• Pro B2 (1-015-455 / PRO-B2)
• Pro B3 (1-015-457 / PRO-B3)
• Pro C2 (1-015-448 / PRO-C2)
• Pro C3 (1-015-451 / PRO-C3)
• Pro D (only in combination with BUS-CON-D / 1-053-348)

ATTENTION!
Standard-compliant operation
To ensure standard-compliant operation, safety devices must be installed in accordance with the operating instructions for your sauna control unit.

 Installation and connection

Work may only be carried out when the power has been disconnected. During installation, observe the technical data on page 20.

ATTENTION
Interference can impair signal transmission

• Route all data cables separately from other mains cables and control cables.
• Protect cables with only one layer of insulation by using a conduit (double insulation).

1. Secure the WiFi module 1 somewhere near the sauna control unit and within the range of its network (WiFi) using the screws provided.
2. Sentiotec WiFi is connected to the sauna control unit using the 8-pin Ethernet cable in accordance with the following diagrams:
3.  Make a note of the serial numbers (10 digits) of your devices to ensure you can enter them in the app later on.

• Sauna heater…………………………………………………………………………………….
• Sauna control unit……………………………………………………………………………..
• Other products…………………………………………………………………………………..

ATTENTION!
Damage to the device!
Installation of the app and input of the settings (see “6. Overview of functions” and “7. Operation”) must be completed before the sauna control unit is switched on.

MySentio WiFi installation

MySentio WiFi installation

Connection tohome.com4

Connection to PRO B (B2, B3) und PRO C (C2, C3)

Connection to PRO D (D2, D2I, D3, D3I)

Commissioning

1. Activate the remote start on the sauna control. home.com4:

   • Use rotary selector to select the remote start icon.

   • Press rotary selector briefly to start the operating mode “Standby for remote operation”
     PRO B (B2, B3):
     Press the temperature knob for three seconds to start the operating mode “Standby for remote operation”(display flashes or Countdown of 30 sec.)
     PRO C (C2, C3):

   • Turn the top knob to the remote start symbol

   • Press the lower knob to start the operating mode “Standby for remote operation” (display shows „on“ or countdown of 30 sec.)
     PRO D (D2, D2i, D3, D3i):

   • Control unit at standby mode (display shows „—“)

   • Press the On/Off button and the mode button simultaneously for about  three seconds to start the operating mode “Standby for remote operation” (display shows „rc“ or countdown of 30 sec.)
     Please note the operating instructions for the respective control unit – “Standby for remote control”
     TOset up the MySentio app, the sauna control MUST be in “standby for remote control” mode!

2. Download the “MySentio” app onto your smartphone or tablet

   • Open the app and sign up.
   • Following the instructions provided in the app.

3. Signing up (Fig. 1–3):

   • Complete all fields and make a note of the email and password you use. In case you have forgotten your password, simply enter the email address you used when you registered. You will then be given instructions on how to change the password.

4. Add a new device: (Fig. 4–5):

   • Select your device and tap the switch below it. (Fig. 6)

• Connect the WiFi to the smartphone by pressing the pairing button.(Fig. 7)
• Rename the device and wait until the app has finished loading.(Fig. 8)
• Select WLAN (must be 2.4 GHz!)
• Enter the serial numbers of your devices. (Fig. 9)

Overview of functions

Sentiotec WiFi can only be used to control functions provided by the sauna control unit in use (for example: Pro-series – NO coloured light, control units for Finnish sauna mode – NO evaporator)

Operation

Home menu

Sentiotec WiFi can only be used to control functions provided by the sauna control unit in use (for example: Pro-series – NO coloured light, control units for Finnish sauna operation – NO evaporator) – see page 11

1. Devices – switch between devices or add new devices.

2. Settings – see page 14

3. Status – status display (standby, on, off)

4. Temperature – setting for the preferred temperature (set point) Increase/decrease temperature using arrow up/down or by moving the flame in the circle

5. Temperature display – shows the selected temperature (set point) when entering the settings, changes to displaying the measured temperature (actual value) after 3 sec.

6. Humidity – combi mode on/off – can only be switched on if the sauna
   heater is switched on (see b)

7. Intensity of humidity – setting for the preferred humidity (set point) The maximum humidity set point will depend on the sauna temperature. The higher the sauna temperature, the lower the maximum humidity value that can be set (see the operating instructions for the sauna control unit in use)

8. Infrared – infrared lamp on/off

9. Intensity of infrared – IR lamp dimmer levels 1–7

10. Heater – heater on/off

11. Light – cabin light on/off, if dimmable press and hold to enter device settings – see page 15

12. Fan – fan on/off, if variable press and hold to enter device settings – see page 15

13. Coloured light – coloured light on/off, press and hold to enter device settings – see page 15

14. Devices – back to the Home menu

15. Profile – see page

Press and hold: press the symbol and hold it for 3 seconds
DANGER!
Make sure that no flammable objects are ever left on the sauna heater when the sauna cabin is put into operation.

Settings

1. Device settings – see page 15
2. Colour light settings – see page 16
3.  All off – switches off all functions and consumers at once.
4. User program on/off – there are 5 preset user programs available, which can be changed.
5. Edit user program – the set- tings in the user programs can be changed. The settings for the following functions can be changed to suit the user’s preferences.

• Temperature
• Humidity
• Infrared
• Light
• Fan
• Coloured light

Device settings

1. Lighting with heater – switches on the lighting when the sauna heater is switched on
2. Cabin light intensity – cabin light dimming levels (0–100%)
3. Fan intensity – variable fan output levels (0–100%)
4. Switch-on time – setting for the maximum period for which the sauna should operate continuously.
5. Relay box mode – Only avail- able with sentiotec WiFi Extension Box (1-053-315).
6. Time zone – selection of the relevant time zone
7. Reconfigure WLAN – configure WLAN connection of the Wifi module
8. Firmware updates – suggest new app versions.
9. Info – query information, such as: software version, device type, etc.
10. Rename – rename the device in the app.
11. Remove – remove the device from the app.

Colored light settings

1. Light group on/off – tap toswitch on/off

2. Rename light group – tap to rename

3. Light group settings – tap to open, then select from colour and intensity, and tap again to close

4. Colour – colour setting for the light group that is open is displayed – press and hold to select colours – setting for the preferred colour entered using the colour wheel or an individual colour, or colour rotation

5. Intensity – coloured light dimming levels for the light group that is open (0–100%)

6. Standard – select from standard colours and colour rotation

7. Colour ring – individual colour selection

8. Colours – tap to select the desired colour

9. Colour ring – individually selectable colours

10. Colour field – set the white-bordered circle to the desired colour 6 Cancel – closes the colour selection and changes are not applied 7 OK – to apply the selected colour

Profile

1. Profile – you can change the following information:
   • First name
   • Last name
   • Email address
   • Remove profile
2. Language – select language
3. GTC – general terms and conditions
4. Privacy policy – data protection guidelines
5. Licence agreement – end user license agreement
6. Licences – open source licenses
7. Logout – log out of your profile 8 Version – current version of the ap

Troubleshooting

Error messages
The following table describes the possible faults and their causes. Further information and assistance can be found in the semiotic help centre at: sentiotec.zendesk.com/hc/de
Also note the error messages of your sauna control unit.

Maintenance

The device is maintenance-free. An internet connection is used to update it automatically.

Disposal

• Dispose of packaging materials in accordance with the applicable waste disposal regulations.
• Used devices contain reusable materials as well as hazardous substances. Therefore, do not dispose of your used device with household waste, but do so in accordance with the locally applicable regulations.

Technical data

Ambient conditions
Ambient temperature: -20 °C to +40 °C
Protection class (protected against splashing water): IP 20
Minimum requirement WiFi 2.4 GHz: 1 Mbit

Control unit
Dimensions: 83 x 56 x 24.5 mm
Operating voltage: 24 V DC max. 10 W

Connection cables
Power supplied by Ethernet cable: 8-pin RJ45 max. 3 m

CENTRAL EUROPE
sentiotec GmbH | Division of Harvia Group |Wartenburger Straße 31,
A-4840 Vöcklabruck
T +43 (0) 7672/22 900-50 | F -80 |
info@sentiotec.com | www.sentiotec.com

References

• sentiotec HelpCenter
• sentiotec HelpCenter
• sentiotec / Downloads

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>