strands 850160 Big Energy Roof Bar Instruction Manual

strands 850160 Big Energy Roof Bar

Product Specifications:

• Model: Big Energy Roof Bar
• Available Lengths: 600mm, 900mm, 1200mm, 1500mm, 1800mm
• Part Numbers: 850160, 850161, 850162, 850163, 850164, 850160C, 850161C, 850162C, 850163C, 850164C
• Color Coding:
  • Red: + VDC
  • Black: – Ground
  • Yellow: Flash pattern selection (Apply Yellow wire to +VDC)
  • White: Synchronization (Connect white wires of two heads together for synchronization)
  • Grey (for 600mm bar): Steady on (Constantly connect to red wire to achieve it)
  • Blue (for 900mm-1800mm bars): Steady on (Constantly connect to red wire to achieve it)
  • Brown (optional cable): Right arrow (Apply to red wire constantly)
  • Green (optional cable): Left arrow (Apply to red wire constantly)
• Synchronization: Max 2pcs for white wires for synchronization

Product Usage Instructions:

Installation:

Read all instructions and study diagrams before installing the lights.

Flash Pattern Selection:

To select flash patterns:

• *       * Less than 1s press on Yellow wire: Next pattern

  • 1s-3s press on Yellow wire: Previous pattern
  • Over 5s press on Yellow wire: Low power (5s again back to high power)

Synchronization:

To synchronize two heads:

• Connect the white wires of two heads together for synchronization. Maximum of 2 PCs for synchronization.

Steady On Feature:

To achieve steady on feature:

• *       * For 600mm bar: Constantly connect the Grey wire to the red wire.

  • For 900 mm-1800 mm bars: Constantly connect the Blue wire to the red wire.

Optional Cables:

Brown cable: Right arrow (Apply to red wire constantly) Green cable: Left arrow (Apply to red wire constantly)

Frequently Asked Questions

• Q: How many flash patterns can be selected?
  • A: There are multiple flash patterns that can be selected by following the instructions provided. You can cycle through patterns by pressing the Yellow wire for different durations.
• Q: Can I synchronize more than two heads?
  • A: No, the product supports synchronization of up to two heads by connecting their white wires together.
• Q: What is the purpose of the optional Brown and Green cables?
  • A: The Brown and Green cables are for activating the right and left arrow functions respectively. These can be applied to the red wire for constant activation.

Dimension

Specification

850160: 600MM ROOF BAR

• RED: + VDC
• BLACK: – GROUND
• YELLOW: Flash pattern selection (Apply Yellow wire to +VDC)
• Less than 1s =For next pattern
• 1s-3s =For the previous pattern
• Over 5s=For low power, 5s again back to high power
• WHITE: Synchronization (Connect white wires of two heads together for synchronization) MAX 2pcs
• GREY: Steady on (Constantly connect to red wire to achieve it)\

850161-850164: 900MM-1800MM ROOF BAR

• RED: + VDC
• BLACK: – GROUND
• YELLOW: Flash pattern selection (Apply Yellow wire to +VDC)
• *Less than 1s =For next pattern
• *1s-3s =For the previous pattern
• *Over 5s =For low power, 5s again back to high power
• WHITE: Synchronization (Connect white wires of two heads together for synchronization) MAX 2pcs
• BLUE: Steady on, (Constantly connect to red wire to achieve it).
• BROWN (optional cable): Right arrow (Apply to red wire constantly)
• GREEN (optional cable): Left arrow (Apply to red wire constantly)

Flash patterns

Part no. 850160,850161,850162,850163,850164,850160C,850161C,850162C,850163C,850164C

Contact us if you need support: support@strands.se or +46(0)320-450450

• www.strands.se
• www.strandseurope.com

READ THIS BEFORE INSTALLATION

READ ALL INSTRUCTIONS AND STUDY DIAGRAMS BEFORE INSTALLING YOUR NEW LIGHTS!

LEGAL MOUNTING

Check with state or local authorities for laws governing usage and proper mounting of your new lights.

TAKE CARE OF YOUR PRODUCT

Keep the product clean. Dirt on the lens and heat sink may shorten the product’s lifetime. We recommend using lukewarm water and alkaline degreasing. Follow the degreasing instructions carefully and rinse off gently with cold or lukewarm water on low pressure.

WARNING!

Strong chemicals should not be used on the product. If you accidently get strong chemicals on the product, rinse off immediately, use plenty of water so that no chemicals remain in any joint. Some chemicals have a small amount of solvent in them, this can dissolve sealing adhesives and compromise the product’ swater proofness. Some chemicals pull out liquid from plastic and rubber-based components, which makes the plastic or rubber brittle and bursts more easily. Be careful not to use high water pressure close up on the product. If you use high water pressure at short distances, most products find it difficult to close out the water.

INSTALLATION

• If there is a contact/connector on the product, it should not be cutted. If the connector is cut, the warranty is not valid.
• If the product has loose cable and no connector. If the cable is shorter than 50 cm, the cable must not be cutted. If the cable is cut, the warranty is not valid.
• If the cable is longer than 50 cm, it is ok to shorten the cable, but not shorter than 50 cm.
• If the cable is cut shorter than 50 cm, the warranty is not valid.
• Tighten screws and bolts so that they do not loosen or chafe.
• Do not tighten screws so hard that the protective bearings on the product breaks.

WARNING!

Do not use higher volts than the product description states. This light becomes hot under continuous use. Don´t remove or touch the casing for at least 30 minutes after turning the lamp off.

References

• Proffs på Fordonsbelysning & Lastbilstillbehör - Strands
• Proffs på Fordonsbelysning & Lastbilstillbehör - Strands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>