Vodiac Pro VR Headset Lineart User Guide
- August 17, 2024
- Vodiac Pro
Table of Contents
Vodiac Pro VR Headset Lineart
Specifications
- Product Name: Zodiac Pro VR Headset
- Compatibility: Smartphones with screen sizes between 4.7 inches and 6.2 inches
- App: Vodiac Pro app (available for free download)
- Audio Output: Compatible with Bluetooth earphones for enhanced sound experience
Product Overview
Safety Instructions
- We recommend children should be 7 years and above to use the VR headset, and only under adult supervision. Vodiac VR videos can be experienced in phone mode (non-VR) by simply using your smartphone screen.
- If you experience nausea, discomfort, eye strain, or disorientation, discontinue using the VR headset immediately. If you have had or could be prone to seizures, consult a doctor before using the VR headset.
- Use caution to avoid injury and remain seated unless your content experience requires standing and it is safe to do so. The use of the VR headset may cause a loss of balance.
Headband Assembly
- To attach the headband to the main body (as shown in figure 1) hold the headband forward and insert the headband clip into the slot of the VR headset.
- To remove the headband (as shown in Figure 2) press down on the headband release button, while pulling the headband back from the VR headset.
Inserting Smartphone
- Press the phone compartment release button located on top of the VR headset (as shown in Figure 3), and open the flap outwards to approximately 45°.
- Keep the center line of your smartphone aligned with the center line of the lens barrel wall (as shown in Figure 4).
Note:
- We advise you to remove your smartphone from its case before placing it inside the headset.
- If the smartphone is not placed horizontally, it may cause upper and lower ghost images.
- Please adjust the smartphone so that the screen is horizontally centered.
- Please be careful when removing the smartphone from the VR headset to prevent any possible damage.
- To use any additional bluetooth devices connected to the smartphone, please ensure you connect any devices to the smartphone before placing them into the VR headset.
Focus Adjustment
- Use the focus adjustment knob to adjust the virtual reality video into focus (as shown in Figure 7).
- Use the picture distance adjustment knob to adjust the picture distance of the virtual reality video (as shown in Figure 8).
- Adjust the picture distance accordingly to obtain the best viewing experience.
MORE INFO
Scan QR Code
- Use your smartphone to scan the QR Code below to begin.
Download the App
- Follow the link from the QR Code and use the App Store button to download the free Vodiac Pro app.
Launch & Discover VR
- Once downloaded, launch the Vodiac Pro app and be transported into an immersive world of virtual reality entertainment.
FAQs
- I cannot see the app in the Google Play / Apple App Store
- Please search for the application using the keywords Zodiac Pro VR Video. If you cannot see the app or it says it isn’t compatible with your device, please go to https://www.vodiac.com/pages/supported-devices to check our compatibility list.
- I’m having trouble seeing the images clearly in the VR headset, how can I adjust the image quality?
- Please make sure the plastic protective film coverings have been removed from both headset lenses.
- Additionally, please make sure the phone is placed in the middle of the front compartment. Finally, you can adjust the three focus adjusters on the top of the headset to make certain that the image is focused clearly.
- How do I access the VR controls whilst wearing the VR headset?
- Adjust your gaze to place the Arrow Icon inside the small Circle Icon in the middle of your view. Once activated, the control settings will appear on the screen allows you to fast-forward, rewind, pause, play, and exit the experience.
- How do I start an experience whilst wearing the VR Headset?
- You will see a small ‘circle icon’ on the screen – look at this focusing your eyes on the circle – the circle will start to fill in, and when it completes, the VR experience will start.
- I can’t hear any sound or the sound is too low, is there a way to adjust the audio whilst viewing the experiences?
- Firstly, please make sure your phone is not in Silent Mode. You can then use your phone’s volume controls to adjust the sound levels. There is no way to change the volume from the app itself. For the very best experience, we recommend using bluetooth earphones.
- Can’t see the menu in VR mode?
- You may need to reset the rotation. Look in the top right-hand corner whilst wearing the VR headset. Ensure you’re in VR mode. You will see Reset Rotation gaze at this and reset the rotation to the direction you’re looking.
Still unsure how to get started? Go to vodiac.com/support to check out our step-by-step videos and full list of FAQ’s.
CONTACT INFORMATION
- Questions? Problems?
- Call us first – We aim to fix 99% of issues within 24 hours
- UK Support Number – 0333 121 0030
- USA Support Number – 0333 666 0802
- For more help and advice please visit vodiac.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>