DEFENDER IP4MCB1PRO 4K Guard Pro Camera User Guide
- August 20, 2024
- Defender
Table of Contents
QUICK START GUIDE
IP4MCB1PRO 4K Guard Pro Camera
ATTENTION!
For Returns or Support you MUST contact
DefenderCameras.com/Support
https://support.defendercameras.com/hc/en-us
ACTIVATE YOUR WARRANTY
PROTECT
Covered for the unexpected
SUPPORT
Receive videos, tips & updates for your product
VALUE
Exclusive access to special offers
Open your camera & scan this QR code, or visit: DefenderCameras.com/Warranty
EXTEND YOUR WARRANTY
Don’t forget to protect your purchase and ease your mind by extending your
included 1 year manufacturer warranty to 2 or 3 years. If something goes
wrong, our team of Security Experts will get you back up and running fast!
Extended Warranties can be purchased up to 60 days after your product’s
purchase.
2 YEAR WARRANTY
Extend your peace of mind to two years
◊ Product Defects
◊ Advanced Replacements
◊ Free Return Shipping
3 YEAR WARRANTY
Extend your peace of mind to three years
◊ Product Defects
◊ Advanced Replacements
◊ Free Return Shipping
DefenderCameras.com/pages/extended- warranties
Open your camera & scan this QR code, or visit: DefenderCameras.com/pages /extended-warranties
WHAT’S INCLUDED
- 4K Guard Pro Camera
- Camera Power Supply (10ft)
- Camera Power Extension Cable (25ft)
- Camera Mounting Hardware
- Camera Mounting Template
- Window Warning Sticker
- Quick Start Guide
- Free Lifetime Customer Support
WHAT YOU’LL NEED
- Wi-Fi Internet Connection
- Drill and/or a Phillips #2 screwdriver
- 3/32” drill bit for pilot holes
- 7/32” drill bit for wall anchors
- 7/8” long drill bit
- A compatible Android or iOS phone
IMPORTANT: The Camera Power Supply is NOT waterproof.
REGULATORY INFORMATION
The regulatory information herein might vary according to the model you
purchased. Some information is only applicable for the country or region where
the product is sold.
FCC Information
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Conditions:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Compliance:
This equipment has been tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC Rules.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communication.
- For class A device, these limits are designed to provide reasonable protection against harmful interference in a commercial environment. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
- For class B device, these limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Privacy Protection Notice
As the device user or data controller, you might collect personal data of
others such as face, fingerprints, car plate number, Email address, phone
number, GPS and so on. You need to be in compliance with the local privacy
protection laws and regulations to protect the legitimate rights and interests
of other people by implementing measures include but not limited to: providing
clear and visible identification to inform data subject the existence of
surveillance area and providing related contact.
PRODUCT DETAILS
LED Indicator Light Meaning
| Solid: Initializing
---|---
| Flashing: Camera not connected
| Solid: Camera is connected
| Flashing: Camera ready to connect
Note: If you see a solid/flashing red indicator on the front of the camera, please reset the camera by pressing and holding the reset button until you hear a beep. If you see a flashing green light, the camera is ready to connect.
LET’S GET STARTED
IMPORTANT: Screenshots and some steps may vary based on the device used to step up the App.
-
Download the App
Download the Defender Guard app and follow the steps to create an account. An email account is required for verification.
https://apps.apple.com/us/app/defender-guard/id1471331497| https://play.google.com/store/apps/details?id=com.vezel.android.defendercuard&hl=en_US&gl=US
- Plug-In Your Camera to Power On
Before connecting your camera to the App, wait 60 seconds for the LED indicator light to flash green.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>