INTREPID Cross mount 300 Xtrusion Overland User Manual
- August 16, 2024
- INTREPID
Table of Contents
INTREPID Cross mount 300 Xtrusion Overland
COMPONENTS
SPARE PARTS
INSTALLING THE CROSS MOUNT SOLO
4 T-NUTS INSERTION
Insert x2 T-Nuts into the groove of the top frame where you want to install the Top Crossbar Side Bracket. Insert x2 T-Nuts into the groove of the Top Crossbar.
CROSSBAR & SIDE BRACKET ASSEMBLY
After mounting the side bracket to the crossbar, adjust x2 bolts and x2 washers as the picture shows, then tighten it into the T-nut.
ASSEMBLY TO FRAME
- Insert x2 bolts and x2 washers into the groove of the top frame as the picture shows, then tighten it.
ASSEMBLY
- To ensure that the crossbar is stable enough for you to attach the other side, we recommend attaching one side first.
DIMENSION
Two indication lines have been etched on both ends of the top crossbar to make sure that side brackets are fully inserted when mounting. Lines should not be visible after assembly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>