Klauke EKM 60/22CFB 300mm² Bosch Battery Owner’s Manual

: August 16, 2024
: Klauke

Klauke EKM 60/22CFB 300mm² Bosch Battery

Product Specifications

Model: EKM 60/22CFB
Manufacturer: Klauke UK Ltd.
Country of Origin: Germany
Warranty: 2 years
Power Source: 18 V Bosch battery series

Product Usage Instructions

Safety Precautions:
Before using the Klauke EKM 60/22CFB, please read and adhere to the following safety guidelines:

Only use with UL listed wire connectors as instructed.
Use only with the specified 18 V Bosch battery series.
Ensure the warranty seal is intact to maintain warranty coverage.

Tool Maintenance:
It is recommended to have the tool checked yearly by an Authorized Service Center (ASC) for predictive maintenance and part replacements.

Operating the Tool:
To operate the Klauke EKM 60/22CFB:

Ensure the tool is charged with the compatible battery.
Follow the specific instructions provided for wire connectors.
Press the tool for the designated time (20 sec) as indicated on the tool.
Release the pressure and repeat if necessary.

Frequently Asked Questions (FAQ)

What should I do if my warranty seal is broken?
If the warranty seal is broken, it may result in loss of warranty coverage. Contact the Klauke-Service Team for further assistance.
How can I identify the manufacturing date of my tool?
The manufacturing date can be identified using the datecode provided in the manual. For example, X = 2027; R = April.
Can I use the Klauke EKM 60/22CFB with any other battery series?
No, this tool is designed for use only with the 18 V Bosch battery series for optimal performance and safety.

INTRODUCTION

Thank you for choosing a Klauke tool. We hope it gives you lots of pleasure.
You have purchased a quality product „Made in Germany“, which is covered by a 2 year warranty. The warranty commences from the purchase receipt date.
To ensure lasting enjoyment and a ? awless tool function, the product must be serviced by an Authorised Service Center (ASC) after 10,000 operations or after 3 years. Should the ser-vice Interval exceed 10.000 cycles the warranty claim is void.
The Service includes predictive maintenance in which worn-out parts will be replaced and safety relevant parts checked/replaced.
We recommend to have the tools checked yearly through an Authorized Service Center (ASC).
For questions about our tool service we are personally available under the following telephone numbers:
- Technical Support +492332709544
- Repairs / Loaner tools +492332709540

PRODUCT OVERVIEW

DIMENSION

WARNING

Read all safety warnings, instructions, illust-rations and speciﬁ cations provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, ﬁ re and/or serious injury.
Save all warnings and instructions for future reference.

BATTERY

Use tool only with 18 V Bosch battery

USING INSTRUCTION

Automatic Retraction Stopp

Manual Retraction Stop +

SAFETY INSTRUCTION

LED INDICATOR

ACCESSORIES

QS = Querschnitt/Cross-section; IS = isolierte Rohrkabelschuhe/ pre-insulated tubular cable lugs;
F = feindrähtige Leiter/ compacted ﬁ ne str. conductors; ISQ = isolierte Quetschkabelschuhe/ pre-insulated tubular cable lugs;
RU = Runddrückeinsätze/ pre-rounding dies; sm = Sektorleiter mehrdrähtig/ multistranded conductors; AE = Aderendhülsen/ wire ferrules
Bitte beachten Sie bei der Verpressung von Verbindern die Einschränkungen im technischen Anhang unseres Kataloges!Please observe the restrictions in the technical index of our catalogue when crimping connectors!

Crimp Chart 22 tool series

CE

Declaration of conformity. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 in accordance with the regulations of directives 2006/42/EG, 2014/30/EU, 2011/65/EU
Declaration of conformity RED. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN IEC 62368-1, ETSI EN 301489-1, ETSI EN 301489-17, ETSI EN 300328 V2.2.2, EN 62479 in accordance with the regulations of directives 2014/53/EU, 2011/65/EU

UKCA

Declaration of conformity. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: BS EN 62841-1, BS EN ISO 12100, BS EN ISO 13857, BS EN ISO 13854, BS EN 28662-1,
BS EN 61000-6-3, BS EN 61000-6-2, BS EN ISO 14118 in accordance with the regulations of directives 2006/42/EG, 2014/30/EU, 2011/65/EU