Klauke EK 35-4ML Battery Powered Hydraulic Crimping Tool Instruction Manual
- June 27, 2024
- Klauke
Table of Contents
Klauke EK 35-4ML Battery Powered Hydraulic Crimping Tool
Product Specifications
- Model: EK 35/4ML
- Serial Number: HE.16103_C
- Manufacturer: Klauke UK Ltd.
- Power Source: 10.8V Li-Ion Battery
Product Usage Instructions
Charging the Crimping Tool
- Ensure the crimping tool is switched off before charging.
- Connect the charger to a power source.
- Insert the battery pack into the charger and wait for it to fully charge.
Using the Crimping Tool
- Select the appropriate die for the crimping task.
- Insert the wire or cable into the die and position it correctly.
- Squeeze the handles of the crimping tool firmly until the crimp is completed.
Maintenance
Regularly inspect the tool for any signs of wear or damage. Contact the
manufacturer for predictive maintenance services.
Frequently Asked Questions (FAQ)
-
Q: How do I know when to replace the battery?
A: If you notice a significant decrease in performance or if the battery does not hold a charge, it may be time to replace it. -
Q: Can I use the crimping tool for different wire sizes?
A: Yes, the crimping tool is designed to work with a range of wire sizes. Ensure you use the appropriate die for each size.
Thank you for choosing a Klauke tool. We hope it gives you lots of pleasure.
You have purchased a quality product „Made in Germa-ny“, which is covered by a 2 year warranty. The warranty commences from the purchase receipt date.
To ensure lasting enjoyment and a flawless tool function, the product must be serviced by an Authorised Service Center (ASC) after 10,000 operations or after 3 years. Should the ser-vice
Interval exceed 10.000 cycles the warranty claim is void.
The Service includes predictive maintenance in which worn-out parts will be replaced and safety relevant parts checked/replaced.
We recommend to have the tools checked yearly through an Authorized Service Center (ASC).
If you have any questions about our tool service or about a specific
application, please go to
http://www.klauke.com/en/support/tool-service/
Your Klauke team
WARNING
Read all safety warnings, instructions, illust-rations and specifi cations
provided with this power tool.
Failure to follow all instructions listed below may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future reference.
D GB F E
eight (incl. battery):| ~ 1,66 kg| : Battery capacity:|
1,5 Ah, Li-Ion (RAML1)
force: Force de| 35 kN (max.)| Charging time:| 40 min. (RAML1)
Environmental Temperature| -10°C – +40°C| : Battery voltage: Tension
batterie:| 10,8 V
Protection class:| IP 2X
Crimping time:| 2-4 s (depending on the connector size)
Crimp per battery:| ~170 crimps (150 mm² Cu DIN 46234)
Sound level:| < 70 dB (A) in 1m distance
Vibrations:| <2,5 m/s²
P NL RUS PL
| ~ 1,66 kg| | 1,5 Ah, Li-Ion (RAML1)
| 35 kN (max.)
35 кН (макс)
| |
40 min. (RAML1)
| -10°C – +40°C| spanning
| 10,8 V
10.8 В
|
IP 2X
|
| ~170 (150mm² Cu DIN 46234)
| < 70 dB (A) на расстоянии 1 м
Vibrates| < 2,5 m/s²
< 2,5 m/s²
*CE-´ –** Declaration of conformity. We declare under our sole responsibility that this product is in conformity with the following standards or normative documents: EN 62841-1, EN ISO 12100, EN ISO 13857, EN ISO 13854, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN ISO 14118 in accordance with the regulations of directives 2006/42/EG, 2014/30/EU, 2011/65/EU
**UKCA-´*** – Declaration of conformity. We declare under our sole
responsibility that this product is in conformity with the following standards
or normative documents: BS EN 62841-1, BS EN ISO 12100,
BS EN ISO 13857, BS EN ISO 13854, BS EN 28662-1, BS EN 61000-6-3, BS EN
61000-6-2, BS EN ISO 14118 in accordance with the regulations of directives
2006/42/EG, 2014/30/EU, 2011/65/EU
- Thorne & Derrick
- +44 (0) 191 410 4292
- www.powerandcables.com