Zwide M9 Wireless Lavalier Microphone User Manual
- August 15, 2024
- Zwide
Table of Contents
Zwide M9 Wireless Lavalier Microphone
PRODUCT INTRODUCTION
Thank you for choosing Zwide Wireless Lavalier Microphone. To learn more about our products, please read this USER
- MANUAL carefully before using. Hava is a good user experience.
- This product is an intelligent noise-reduction wireless microphone, that can provide professional recording output.
- Plug and play, no APP required.
- Multiple uses: network broadcast, Vlog shooting, interview recording, video teaching, and other scenarios.
- Zwide Wireless Lavalier Microphone consists of two parts, TX and RX.
OPERATING INSTRUCTION
-
Matrix Dual Mics
For recording audio. -
Power/ENC Key
-
Power ON/OFF: Hold the key 3s to Power ON/OFF.
-
ENC: Press the key to enable/disable the ENC function.
-
Gain Adjust/ Mute Key
-
Gain Adjust: Press the key to adjust the gain.
-
Gain Adjust: Press the key to adjust the gain.
-
Connect/ENC/Power Indicator 3 Colors Indicator: Red Green Blue
-
Red for state of power: Blink—Quantity of electric ≤10%, Keeps ON—Charging, OFF—Full Charging
-
Green for the state of ENC: Keeps ON — -Enabled noise reduction, OFF—Disabled noise reduction
-
Blue for the state of connect: Keeps ON —Connect successfully, OFF—Connect failure
-
Gain Indicator
3 Colors Indicator: Red / Green/Blue -
Red: 13
-
Green: L2
-
Blue: LI
OFF: Mute -
Charging Pad
For charging in the Charging Case -
USB-C Port
For charging or data transmission -
Magnetic
For Magnetic Clip or Magnetic Sheet -
Connect Indicator
Green: Keeps ON—Connect successfully, blink: Connect failure -
USB-C Digital Audio Output Port
Connect with sound pick-up equipment with a USB-C Port (Mobile phone, tablet) -
USB-C Charging Port
Charging for sound pick-up equipment, connect USB-C Charging Cable, -
Lightning Digital Audio Output Port
Connect with sound pick-up equipment with Lightning Port (iPhone, iPad) -
Lightning Charging Port
Charging for sound pick-up equipment, connect Lightning Charging Cable -
TXl Connect Indicator
Green: Keeps ON —Connect successfully, Blink: Connect failure, OFF: Mute -
Power Indicator Green:
- Keeps ON—Quantity of electric > 10%
- Red: Keeps ON—Charging,
- Blink—Quantity of electric ‹ 10%,
- OFF—Full Charging
-
TX2 Connect Indicator
Green: Keeps ON—Connect successfully, Blink: Connect failure, OFF: Mute -
3.5mm TRS Analog Audio Output Port
- For audio output to sound pick-up device ( such as mobile phone, computer, camera), connect by Audio Cable.
- DO NOT connect to a device with an output of 24V or 48V.
-
Power/Mute Key
- Hold the key 3s to Power ON/OFF.
- Press the key to enable/ disable the ENC function.
-
Gain + Key
For increase 1 level of the gain. -
Gain – Key
To decrease 1 level of the gain -
USB-C Port
For charging or connecting with mobile phone and computer. -
Charging Pad
For charging in the Charging Case -
Power Indicator
The TX is charging if the Indicator is ON. -
Power Screen
Indicate the Charging Case Quantity of Electric. -
USB-C Port
Charging for Charging Case.
Connecting Diagram of Mobile Phone RX.
- Hold the Power / ENC Key 3s of TX, and the Connect Indicator blink.
- Connect the USB-C RX or Lightning RX with your phone (or tablet).
- Both of the TX and RX Connect Indicator keeps ON, and connect successfully.
OPPO/vivo/ iQOO/realme/OnePlus brand phones can be used normally only by searching “OTG” in “Settings”- > turn ON “OTG connection” or “OTG power supply”; Several models need to search “Default recorder” in “Settings” -> select “Add-on”.
Connecting Diagram of Camera RX.
To record audio and transmit to a camera, clip the Camera RX to a camera’s hot/cold shoe and connect to the Mic Port of the camera using the 3.5mm TRS~3.5mm TRS Audio Cable provided.
PACKING LIST
- TX x2
- USB-C RX x1
- Lightning RX x1
- Camera RX x1
- Magnetic Clip x2
- Windscreen x2
- Charging Case x1
- Charging Case Cable x1
- 3.5mm TRS~3.5mm TRS Audio Cable x1
- Magnetic Sheet x2
- USER MANUAL x1
- Carrying Pouch x1
Different combos include different items. Please refer to the actual combo purchased. The features described in this USER MANUAL are general and apply to all combos.
SPECIFICATIONS
- Our products are constantly innovative and subject to change without prior notice.
- The data provided above is based on laboratory testing results.
SHENZHEN ZHIWEI TECHNOLOGY CO., LTD.
- Zwide is a trademark of SHENZHEN ZHIWETECHNOLOGY CO., LTD
- Copyright @2023 Zwide Inc. All Rights Reserved.
- Zwide
- Copyright @2023
- Made in China.
- The Apple logo, iPhone, iPad, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.
- The trademark of “iPhone” is used in Japan with a license from Aiphone K.K
- Android is a trademark of Google LLC, registered in the U.S. and other countries.
- USB-C and USB Type-C are registered trademarks of USB Implementers Forum.
- Bluetooth logo and bluetooth are trademarks of Bluetooth SIG, Inc., registered in the U.S. and other countries.
- All other company names, product names, and logos are the trademarks or registered trademarks of their respective owners.
Compliance Information
FCC Compliance Notice
Supplier’s Declaration of Conformity
- Product Name: Zwide Wireless Lavalier Microphone
- Model Number: M9
- FCC ID: 2BB3W-M9
- Responsible Party: Zwide Inc.
We, Zwide Inc., being the responsible party, declare that the above-mentioned model was tested to demonstrate compliance with all applicable FCC rules and regulations.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Information
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposure conditions without restriction.
IC Statement
This device complies with Industry Canada’s license-exempt RSSS, Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
WARRANTY CARD
Warranty scope: In case of product failure, you can get a replacement within
15 days and free repair service for 365 days, with an inspection report issued
by the authorized service center.
ENJOY THE PURITY PROMISE OF THE VOICE
SUBSCRIBE FOR MORE INFO http://www.zwide.com.
Address:
4th~5th Floor, Bld 6 and 6th Floor, Bld 8, Lijincheng Industrial Park, Yousong
Community, Longhua Street, Longhua District, Shenzhen, China 518109.