AstroAI AIRUN Z1 Portable Car Air Pump User Manual

AstroAI AIRUN Z1 Portable Car Air Pump

INTRODUCTION

• Thank you for purchasing the AstroAI Portable Tire inflator.
• This product is a tire inflator with a high-quality digital screen. The digital screen can be used to monitor air pressure while inflating and easily set pressure.
• Once the preset air pressure is reached, the tire inflator will automatically shut off to maintain its performance and safety.
• It also is equipped with an illumination function to illuminate dim environments.

Please fully read and understand this manual before using this product and keep this manual for future reference.

WARNING

• Please read the instructions carefully before use. Incorrect usage may damage the product.
• Please practice electrical safety while using this product.
• Do not use the product for unintended purposes.
• Do not place the tire inflator near any heat sources, such as vehicle exhaust pipes.
• Do not use the product near any flammable liquids or gases.
• Do not disassemble the tire inflator.
• Ensure the tire inflator is intact before use, do not use it if it is damaged.
• Do not use the tire inflator if it is damaged or if its wires are exposed, doing so poses a serious risk of electric shock.
• Do not overinflate tires. Excessive pressure may cause injury. Keep out of reach of children.
• Keep the device away from fire, corrosive gases, liquids, and strong magnetic fields.
• Check the preset pressure value before use. The preset pres­sure value should match the object to be inflated.
• Utilize an AC-to-DC power converter if you want to use this pump with an AC power supply.
• Do not store the tire inflator in high-temperature or humid environments.
• When not in use, disconnect the tire inflator from all power sources.
• During use, do not touch any part of the tire inflator apart from the switch and handle. The tire inflator gets hot during use and stays hot for some time after.
• Please let the pump cool for at least 10 minutes after every 15 minutes of use.
• PSI, Bar, kPa and kg/cm2 are the pressure units, not the pres­sure levels.
• Please do not use this product in the rain or near any liquids.
• Do not aim the nozzle at people or any part of a human body.
• This product contains small accessories which are a choking hazard for children. Please keep out of reach of children.
• Do not use this product with 24 V car power. Connect the tire inflator to a 12 V 15 A DC cigarette lighter.
• Do not drag the product by pulling the power cord or the air hose.
• Do not use chemical cleaners to clean the tire inflator. Only use mild soap and a cloth dipped in hot water to clean the plastic parts.
• If any attachments are missing or damaged after the package is delivered, please contact us.

PACKAGE INCLUDES

• AstroAI Tire lnflator x1
• User Manual x1
• Air Nozzles x2
• Needle Valve Adapter x1
• Replacement Fuse x1
• Presta to Schrader Adapter x1

OVERVIEW

1. LED Light
2. LED Button
3. Handle
4. Power Button
5. Screen
6. UNIT Button
7. “+” & “-” Buttons
8. Quick Connector
9. 12 V Cigar ette Lighter Cable
10. Replacement Fuse
11. Needle Valve Adapter
12. Presta to Schrader Adapter
13. 2 x Air Nozzles

FEATURES

• Auto Shutoff: Once the preset air pressure is reached, the tire inflator will automatically shut off.
• LCD Screen: Easy to operate, read and understand.
• Extended DC Power Cord: 9.84 ft (3 m).
• Portable Design: Easy to carry and store in a car.
• Power Cut Memory Function: Automatically recalls the previously set pressure.
• LED light provides illumination in dark environments.

INSTRUCTIONS

Note: Ensure that your car engine is running before powering the tire inflator.

1. Insert the cigarette lighter into your car’s 12 V outlet. The screen will illuminate after receiving power.
2. Press the “R” Button to choose the desired pressure unit. (4 options: PSI, Bar, kPa, kg/cm2 ).
3. Use the”+” and “-” Buttons to set the desired pressure. Use the tire pressure guide on the inside of the driver’s door for guidance. Make sure that the preset pressure is higher than the current pressure of your tire.
4. Remove the valve cap from the valve stem of the tire and connect the air nozzle to the valve stem. If you want to illuminate your surroundings, press the LED Button. (Tip: For better sealing when using the air nozzle, align the valve stem, firmly press it in and flip the small lever.)
5. Press the Power Button to inflate “ “. Once the preset air pressure is reached, the tire inflator will automatically shut off.
6. Remove the air nozzle quickly and recap the valve cap to the tire stem.

TROUBLESHOOTING

Tire inflater will not inflate

• Ensure the in-line fuse is securely and correctly inserted; replace the fuse if necessary.
• Check the vehicle’s cigarette lighter fuse, it should be rated at 15 A.
• Ensure there is a secure connection between the power cord and 12 V socket.
• The preset tire pressure is lower than the current tire pres­sure. Increase the preset tire pressure to the manufactur­er-recommended level.

Tire inflater is operating abnormally

• The inflation nozzle is not properly connected to the tire’s valve stem.
• Ensure there is a strong connection between the power cord and 12 V socket.
• The preset tire pressure is lower than the current tire pres­sure. Increase the preset tire pressure to the manufactur­er-recommended level.

Air leaking through the hose
Ensure there is a strong connection between the inflation nozzle and the valve stem.

Slow inflation

• The inflation nozzle is not properly connected to the tire’s valve stem.
• Excessive use will slow the inflation rate of the tire inflator. Turn it off and let it cool for at least 10 minutes.

Shuts off after extended use
If the tire inflator continues to run for more than 15 minutes, it will shut off due to its overheating protection. Please let it cool for at least 10 minutes.

SPECIFICATIONS

• Model: AIRUN Z1
• Working Voltage : DC 12 V
• Power Rating: 90 W
• Maximum Working Pressure: 150 PSI
• Display Units: PSI , Bar, kPa, kg/cm’
• Maximum Current: 15 A
• Inflation Hose Length: 2.29 ft (70 cm)
• Power Cord Length : 9.84 ft (3 m)
• Dimensions: 3.5 x 7.1 x 6.3 in (8.78 x 18 x 16 cm)
• Certificate: FCC

RECYCLING

You may dispose of the product when its service life has ended, please recycle the recyclable parts according to local guidelines.

WARRANTY PERIOD

2-Year Limited Warranty from AstroAI.
Each AstroAI Portable Tire lnflator will be free from defects in material and workmanship. This warranty does not cover damage from neglect, misuse, contamination, alteration, acci­dent, or abnormal conditions of operation or handling. This war­ranty covers the original purchaser only and is not transferable. AstroAI always wants to provide our customers with excellent products and customer service.

Questions or concerns? We’re happy to help! Please contact us via support@astroai.com

CONTACT

• Web: www.astroai.com
• E-mail: support@astroai.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>