Amphenol IMF059M00 Digital Ir Evm Kit User Manual
- August 16, 2024
- Amphenol
Table of Contents
User Manual
Doc. No.: SITS-SS-IRS-030-00
Part Name Digital IR EVM KIT
Part No. IMF059M00
Rev. 0.0
Digital output IR detector
EVM Kit Manual
IMF059M00 Digital Ir Evm Kit
The information and design authority contained in this document is proprietary
to Amphenol Advance Sensors and could be shared with any customers to promote.
The information and design authority contained in this document is proprietary
to Customer and shall not be disclosed in whole or in part in any form or for
any reason.
You are required to contact with Amphenol Advance Sensors product management
for more information or any help
The information and design authority contained in this document is generated
by Amphenol Advance Sensors & Customer and shall not be disclosed in whole or
in part in any form or for any reason.
You are required to contact with Amphenol Advanced Sensors product management
for more information or any help.
Introduce
This document describes the ZTPD series digital output Evaluation Kit,
including the hardware software, and its installation.
The software is designed for Windows® -based operating systems to communicate
with user’s computer, which functions as a master.
Overview
Evaluation Kit includes the following hardware components as below Fig 1.
– I2C communication board
– IR detector breakout board
– USB A to B cable
– Signal connect 4 wire cable
- Remark
– IR detector is not included at EVM Kit
Fig. 1 Evaluation board setting Overview.
• Software operating procedure
– Downloading software
– Connect the USB cable(PC and I2C board) and 4 wire cable(I2C and breakout
board)
– Enter folder and click ZTPD-2210_EVM_xxx_xxx.exe
– Click connect button
– Click Start button
Software GUI
Basic operating condition setting and display sensor measurement value.
Fig. 2 Measurement Tab screen
Control Unit | Description |
---|---|
Connection setting | The button allows closing and opening the USB |
communication port.
Slave device scan| If the slave device address is not automatically displayed,
check the device manually.
Model selection| Select specific ZTPD model
Measure Logging Interval| Sensor output temperature value display/logging
interval setting
Logging Start| Measure data logging option(If you want to save data, click the
button)
Data acquisition Start / Stop| Measurement start/stop setting
• Product selection
ZTPD series IR detector has different temperature ranged product, so evaluating sensors using EVM software, you must select the exact model you want to evaluate.
Part name | Object Temp. Range | Ambient Temp. Range | Remark |
---|---|---|---|
ZTPD-2210 | -20℃ ~ 100℃ | -20℃ ~ 85℃ | Standard TO-39 package |
ZTPD-2210TA | -20℃ ~ 60℃ | -20℃ ~ 60℃ | Standard TO-39 package |
ZTPD-2210H | -40℃ ~ 125℃ | -20℃ ~ 105℃ | Narrow FOV TO-39 package |
Logging data
Evaluation software provide sensor measurement data in csv file format.
Below is sensor logged data example.
Time | Object Temperature [degC] | Ambient Temperature [degC] |
---|---|---|
[2023-11-01 13:17:09.338] | 25.6 | 27.8 |
[2023-11-01 13:17:10.345] | 25.6 | 27.8 |
[2023-11-01 13:17:11.337] | 25.4 | 27.8 |
[2023-11-01 13:17:12.345] | 25.6 | 27.8 |
[2023-11-01 13:17:13.335] | 25.2 | 27.8 |
[2023-11-01 13:17:14.344] | 25.2 | 27.8 |
[2023-11-01 13:17:15.339] | 25.3 | 27.8 |
[2023-11-01 13:17:16.333] | 25.1 | 27.8 |
[2023-11-01 13:17:17.339] | 25.4 | 27.8 |
[2023-11-01 13:17:18.338] | 25.4 | 27.8 |
[2023-11-01 13:17:19.342] | 25.4 | 27.8 |
[2023-11-01 13:17:20.336] | 25.5 | 27.8 |
[2023-11-01 13:17:21.344] | 26.8 | 27.8 |
[2023-11-01 13:17:22.332] | 29.2 | 27.8 |
[2023-11-01 13:17:23.347] | 27.8 | 27.7 |
[2023-11-01 13:17:24.332] | 27.4 | 27.8 |
[2023-11-01 13:17:25.336] | 27.4 | 27.8 |
[2023-11-01 13:17:26.344] | 27.5 | 27.8 |
[2023-11-01 13:17:27.340] | 27 | 27.8 |
Revision
Version | Changes | Remark | Date |
---|---|---|---|
00 | Initial release | 15 Jan 2024 | |