OPTA SB-246 Bluetooth Smart Watch Owner’s Manual
- June 5, 2024
- OPTA
Table of Contents
OPTA SB-246 Bluetooth Smart Watch Owner’s Manual
PAIRING YOUR SMARTPHONE
Step 1. Download & Install the DaFit App from Play store/APP store.
Step 2. Ensure that Bluetooth and GPS is on and discover able on your
phone.
Step 3. Open the APP on your phone and click on Add device / Bind device
Step 4. Select the device name with the Corresponding MAC ID from the
list and wait for the device to be paired.
DEVICE OVERVIEW
HOW TO CHARGE
Place the Magnetic charger on the smartwatch as displayed in the illustration
above and a battery icon will appear on the watch face to denote that it is
charging.
Please charge the device for 180 minutes before initial power on.
The battery will last up to 24 hours, based on usage.
FAQ
HOW DO I POWER ON MY SMARTWATCH?
Press and hold down the middle power button for at least three seconds. Make
sure the smartwatch is charged before trying to power it on. The smartwatch
will also power on when connected to the charger.
HOW FAR AWAY CAN MY SMARTWATCH BE FROM MY PHONE AND STILL BE CONNECTED?
The range of the wireless Bluetooth connection between your phone and your
smartwatch can vary greatly depending on the environment. In general, you
should have at least 10 metres (or 30 feet) of connectivity.
IS MY SMARTWATCH WATER AND/OR DUST PROOF?
Your smartwatch is dust and splash resistant with a waterproof rating of IP68.
However, we recommend limiting exposure to dust and water because certain
materials on the smartwatch (such as leather straps) may react poorly to
exposure.
WHY CAN‘T I PAIR MY SMARTWATCH TO MY PHONE?
Ensure that your smartwatch is powered on and Bluetooth is enabled on your
phone. Launch the App and follow the on-screen instructions for pairing your
watch. If it fails to connect, check the Bluetooth menu on your phone. If you
see the smartwatch in the device list, remove it. Relaunch the App and repeat
the pairing process.
FEATURES
SPECIFICATIONS
SAFETY INSTRUCTIONS
Cautions
- Prolonged contact may contribute to skin irritation or allergies in some users. If you notice any signs of skin redness, swelling, itchiness, or other skin irritation, please discontinue use or wear the product clipped over a piece of clothing. Continued use, even after symptoms subside, may result in renewed or increased irritation. If symptoms persist, consult your doctor.
- This product is not a toy. Do not allow children or pets to play with your OPTA product. The product contains small components that can be a choking hazard.
- The device contains electrical equipment that could cause injury if not handled properly.
- This product is not a medical device, and is not intended to diagnose, treat, cure, or prevent any disease.
- Consult your doctor before beginning or modifying any exercise program. Consult your doctor before use if you have any preexisting conditions that might be affected by your use of this OPTA product.
- Do not check call notifications or other data on the product’s display while driving or in other situations where distractions could be hazardous.
CHARGING TROUBLESHOOT
Step A:
- Verify that the charging contacts (on the watch) are clean.
- Make sure the charging pins (on the charger) are not bent.
- Reseat the watch on the charger aligning the charging pins with the charging contact points.
- Verify watch is seated snugly on the charger with no gap.
- Verify nothing is between charger and device, i.e. no dust, tape, etc.
- Make sure the charging pins on the watch and cradle/dock are clean.
- You can wipe them with a slightly damp soft cloth.
- Check if there is any dust in the USB port. Blow on the port gently to remove any dust.
- Make sure the charger is getting power. Verify if the charger’s USB cable works with other devices. Sometimes if the device gets too hot while charging, it will go into a thermal shutdown mode until it cools o and then, will continue charging once it is safe again. Try removing the device from the charger, wait for it to cool down, and place it on the charger again.
Step B:
Allow your watch to charge for 60 minutes, then try to turn on the watch.
Step C:
Try changing the charger’s power source, i.e. move to wall outlet from a
laptop or vice versa.
WARRANTY INFORMATION
W e o e r a l i m i t e d d o m e s t i c w a r r a n t y ( w i t h i n I n d i a ) o f 6 m o n t h s a g a i n s t m a n u f a c t u r i n g d e f e c t s o n l y . F o r m o r e i n f o r m a t i o n p l e a s e r e f e r h t t p s : / / o p t a . o n l i n e / p a g e s / w a r r a n t y – i n f o r m a t i o n
Copyright © 2021, O P T A.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>