BRESSER 7009985 Thermo-Hygro Sensor Instruction Manual

: August 15, 2024
: BRESSER

Table of Contents

BRESSER 7009985 Thermo-Hygro Sensor
Product Information
Product Usage Instructions
Safety Instructions
FAQ
General Warning
FEATURES OF THE REMOTE UNIT
FIRST OPERATION
WARRANTY & SERVICE
TECHNICAL DATA
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRESSER 7009985 Thermo-Hygro Sensor

Product Information

Specifications

Product Name: Thermo-/Hygrosensor with LCD display
Model Number: 7009985
Power Supply: 2x AAA 1.5V Batteries (not included)

Product Usage Instructions

Features of the Remote Unit

A. DISPLAY (ON FRONT SIDE): Displays temperature, humidity, and current channel.
B. LED INDICATOR (ON FRONT SIDE): Flashes when signals are transmitted.
C. WALL MOUNT: For mounting the sensor on walls.
D. RESET: Reset all functions after the channel change.
E. SET THE TRANSMISSION CHANNEL (1-3): Input channel for the weather station. Set the channel before inserting the batteries.

Usage Instructions

Insert 2 new UM-4 or AAA 1.5V batteries into the sensor unit, ensuring correct polarity.
Select the transmission channel (1-3) before inserting the batteries. For single-sensor use, leave the selection on channel 1.
Place the sensor unit and receiver unit within range for optimal signal transmission.
Mount the sensor on a wall using the provided wall mount.
Monitor the LCD display for temperature, humidity, and channel information.
If needed, perform a reset to restore all functions after changing the channel.

Safety Instructions

Keep the device away from high temperatures and moisture to prevent damage.
Ensure children are supervised when using the device and keep small parts away from them to avoid choking hazards.
Handle batteries with care, ensuring correct insertion and avoiding exposure to skin or heat sources.
Do not short-circuit or expose the device to fire to prevent

For detailed warranty terms and further product information, visit the manufacturer’s website using the provided links or QR code in the manual.

FAQ

Q: How do I change the transmission channel on the sensor unit?
A: Before inserting the batteries, use the provided controls to select the desired channel (1-3) for transmission.
Q: What type of batteries does the sensor unit require?
A: The sensor unit operates on 2x AAA 1.5V batteries, which are not included in the package.
Q: Can I mount the sensor unit outdoors?
A: It is recommended to mount the sensor unit indoors or in a sheltered area to protect it from extreme weather conditions.

Thermo-Hygrosensor with LCD display

Art. No. 7009985

MANUAL DOWNLOAD

www.bresser.de/P7009985

WARRANTY

www.bresser.de/warranty_terms

Instruction Manual

General Warning

DANGER!
This device contains electronic components which operate via a power source (power supply and/or batteries). Do not let children use the device while unattended. Only use the device as described in the manual, otherwise you run the risk of an electric shock.
Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as they pose a choking hazard. Keep batteries out of the reach of children. Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.
DANGER!
Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fi re or an explosion!

NOTE!
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. The batteries should be removed from the unit if it has not been used for a long time.

NOTES ON CLEANING
Separate the device from the power supply or remove the batteries before cleaning.
NOTE!
Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging the electronics.
SCOPE OF DELIVERY
Outdoor sensor, instruction manual, batteries required (not included): 2 pcs. batteries (1.5V, type AAA

FEATURES OF THE REMOTE UNIT

A DISPLAY (ON FRONT SIDE)
Displays temperature, humidity and current channel.
B LED INDICATOR (ON FRONT SIDE)
Flashes when signals are transmitted.
C WALL MOUNT
For mounting the sensor on walls.
D RESET
Reset all functions after channel change.
E SET THE TRANSMISSION CHANNEL (1-3)
Input channel for the weather station. Set the channel before inserting the batteries.
F BATTERY COMPARTMENT
Unit requires 2 pcs. UM-4 or “AAA” 1.5V batteries.
G BATTERY COMPARTMENT COVER
Unit requires 2 pcs. UM-4 or “AAA” 1.5V batteries.

FIRST OPERATION

Open the battery compartment cover.
Set the desired channel with the switch. If you are using only one transmitter, please leave the selection at „1“.
Insert 2 new UM-4 or „AAA“ 1.5V batteries observing correct polarity.
Use a pin to press the „RESET“ – button located in the battery compartment.
Close the battery compartment cover and set the unit in the desired location.

Although the outdoor sensor is weatherproof, it should not be placed in places exposed to direct sunlight, rain or snow.

TIPS FOR SETTING UP
Please follow the instructions below to ensure optimum operation of the equipment:

Assign each external transmitter unit its own channel.
Place the receiver unit and transmitter unit within 1 meter of each other and activate the manual search for available signals from all connected outdoor sensors on the main unit (weather station not included with delivery).

WARRANTY & SERVICE

The regular warranty period is 2 years and begins on the day of purchase. To benefi t from an extended voluntary warranty period as stated on the gift box, registration on our website is required.
You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms.

DISPOSAL

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! As per the Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in the normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. Disposal in domestic waste violates the Battery Directive.

Batteries that contain toxins are marked with a sign and a chemical symbol.

battery contains cadmium
battery contains mercury
battery contains lead

EC DECLARATION OF CONFORMITY

Hereby, Bresser GmbH declares that the equipment type with part number: 7009985 is in compliance with Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/7009985/CE/7009985_CE.pdf