ROLINE 14013427 KVM Switch with USB Hub User Manual
- August 14, 2024
- ROLINE
Table of Contents
ROLINE 14013427 KVM Switch with USB Hub
Description
Routes HDMI signals in multiple resolutions up to 4K@60Hz from the two USB-C sources to a HDMI display. The USB 3.0 / USB 3.2 Gen 1 Hub provides 5Gbps data signaling rate. With USB-C PD you can charge your devices, without worrying about power shortage.
Features
- Switches video and USB sources between 2 USB-C ports.
- Use the button to switch the signal source.
- Supports HDMI resolutions up to 4K@60Hz.
- 2 USB-A ports and 1 USB-C port provide 5Gbps data signaling rate.
- USB-C PD 3.0 100W charging ability.
It is recommended to use a power supply with 100W or above. With a power supply lower than 60W, charging does not work.
- Single port plug-in: maximum charging 20V/4A 80W
- If port 1 and port2 have devices connected:
- The maximum power of port 1 is 20V/3.00A (60W)
- The maximum power of port 2 is 5V~9V/2.22A (20W)
Power Distribution
| IN1| IN2
---|---|---
80W| –
–| 80W
60W| 20W
Device Overview
| Number | Description | Function |
|---|---|---|
| 1 | USB-C | Connect to input 1 |
| 2 | USB-C | Connect to input 2 |
| 3 | USB 3.2 Gen. 1 / USB 3.0 | Connect to USB 3.2 Gen. 1 / USB 3.0 device |
| 4 | USB-C | Connect to USB-C device |
| 5 | HDMI | Connect to Monitor |
| 6 | USB-C (PD) | Connect to PD charger |
Application
It is recommended to use a power supply with 100W or above. With a power supply lower than 60W, charging does not work.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>