ECOVACS DEEBOT N8 PRO Dein intelligenter Reinigungsroboter Instruction Manual
- August 13, 2024
- ECOVACS
Table of Contents
- ECOVACS DEEBOT N8 PRO Dein intelligenter Reinigungsroboter
- Important Safety Instructions
- Package Contents
- Product Diagram
- Notes Before Cleaning
- Quick Start
- Charging DEEBOT
- ECOVACS HOME App
- Operating DEEBOT
- OZMO Mopping System
- Regular Maintenance
- OZMO Mopping System
- Dust Bin and Filters
- Main Brush and Side Brushes
- Other Components
- Storage
- Indicator Light
- Troubleshooting
- Wi-Fi Connection
- Technical Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ECOVACS DEEBOT N8 PRO Dein intelligenter Reinigungsroboter
Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
When using an elect rical Appli ance , basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
SAVE THESE INSTRUCTIONS
- This Appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the Appliance in a safe way and understand the hazards involved. Children shall not play with the Appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Appliance. Tuck rug fringe under the rug base, and lift items such as curtains and tablecloths off the floor.
- If there is a drop off in the cleaning area due to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.
- Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.
- Please make sure your power supply source voltage matches the power voltage marked on the Docking Station.
- For INDOOR household use ONLY. Do not use the Appliance in outdoor, commercial or industrial environments.
- Use only the original rechargeable battery and Docking Station provided with the Appliance from the manufacturer. Non-rechargeable batteries are prohibited.
- Do not use without dust bin and/or filters in place.
- Do not operate the Appliance in an area where there are lit candles or fragile objects.
- Do not use in extremely hot or cold environments (below -5 C/23°F or above 40°C/104
- Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.
- Do not operate the Appliance in a room where an infant or child is sleeping.
- Do not use Appliance on wet surfaces or surfaces with standing water.
- Do not allow the Appliance to pick up large objects like stones, large pieces of paper or any item that may clog the Appliance.
- Do not use Appliance to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.
- Do not use Appliance to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
- Do not put objects into the suction intake. Do not use if the suction intake is blocked. Keep the intake clear of dust, lint, hair, or anything that may reduce air flow.
- Take care not to damage the power cord. Do not pull on or carry the Appliance or Docking Station by the power cord, use the power cord as a handle, close a door on the power cord, or pull power cord around sharp edges or corners. Do not run Appliance over the power cord. Keep power cord away from hot surfaces.
- If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
- Do not use the Docking Station if it is damaged. The power supply is not to be repaired and not to be used any longer if it is damaged or defective.
- Do not use with a damaged power cord or receptacle. Do not use the Appliance or Docking Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.
- Turn OFF the power switch before cleaning or maintaining the Appliance.
- 23. The plug must be removed from the receptacle before cleaning or maintaining the Docking Station.
- Remove the Appliance from the Docking Station, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.
- The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance.
- Please dispose of used batteries according to local laws and regulations.
- Do not incinerate the Appliance even if it is severely damaged. The batteries can explode in a fire.
- When not using the Docking Station for a long period of time, please unplug it.
- The Appliance must be used in accordance with the directions in this Instruction Manual. ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use.
- The robot contains batteries that are only replaceable by skilled persons. To replace the robot’s battery, please contact Customer Service.
- If the robot will not be used for a long time, power OFF the robot for storage and unplug the Docking Station.
- WARNING: For the purposes of recharging the battery, only use the detachable supply unit CH1822 provided with the Appliance, or CH1918 sold separately as an accessory.
- To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation.
- To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.
- To disable Wi-Fi module on DEEBOT, power the robot ON. Place the robot on the Docking Station making sure the Charging Contacts on DEEBOT and the Docking Station Pins make a connection.
- Press and hold the AUTO Mode Button on the robot for 20 seconds until DEEBOT emits 3 beeps.
- To enable Wi-Fi module on DEEBOT, power the robot OFF and then power ON. The Wi- Fi module is turned on when DEEBOT is restarted.
For EU Countries
For EU Declaration of Conformity information, visit
https://www.ecovacs.com/global/compliance
Correct Disposal of this Product
This marking indicates that this product should not be disposed of with other
household waste throughout the EU. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To recycle your used
device, please use the return and collection systems or contact the retailer
where the product was purchased. They can safely recycle this product.
Package Contents
Product Diagram
Robot
Bottom View
Charging Contacts
Docking Station
Reservoir
Notes Before Cleaning
Quick Start
-
Remove Protective Strips and Films
-
Assemble Dockina Station
-
Install Side Brushes
Charging DEEBOT
- **Docking Station Placement
**
- PowerON
Note: I = ON, 0 = OFF.
DEEBOT cannot be charged when being powered OFF.
- Charge DEEBOT
Empty remaining water from the Reservoir and remove the Reservoir and the mopping pad p=late before charging DEEBOT.
flashes when DEEBOT is charging. goes out when DEEBOT is fully charged.
You can also purchase an Auto-Empty Station that automatically empties your DEEBOT’s dustbin. Explore more accessories at https://www.ecovacs.com/global.
ECOVACS HOME App
To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME app.
Before you start, make sure that:
- Your mobile phone is connected to a Wi-Fi network.
- The 2.4GHz band wireless signal is enabled on your router.
- The Wi-Fi indicator light on DEEBOT is slowly flashing.
Wi-Fi Indicator Light
Tips: If you have any problems during the Wi-Fi setup process, refer to the Troubleshooting > Wi-Fi Connection section in this manual.
Operating DEEBOT
During the first cleaning, please supervise DEEBOT and assist it should there be a problem.
OZMO Mopping System
-
Note: To prolong the service life of the reservoir, it is recommended to use purified water or softened water for OZMO mopping system.
-
Note: When DEEBOT is mopping, DEEBOT automatically detects the carpet and keeps away from it. If you need to clean the carpet, please uninstall the mopping pad plate first.
Regular Maintenance
To keep DEEBOT running at peak performance, perform maintenance tasks and replace parts with the following frequencies:
A multi-function Cleaning Tool is provided for easy maintenance. Handle
with care, this cleaning tool has sharp edges.
Note: ECOVACS manufactures various replacement parts and fittings. Please
contact Customer Service for more information on replacement parts.
OZMO Mopping System
Before performing cleaning and maintenance tasks on DEEBOT, turn the robot OFF and unplug the Docking Station.
Dust Bin and Filters
Main Brush and Side Brushes
Main Brush
Other Components
Note: Before cleaning the robot’s Charging Contacts and Docking Station Pins, turn the robot OFF and unplug the Docking Station.
Storage
If DEEBOT will not be used for a while, fully charge DEEBOT and power OFF before storage. Charge DEEBOT every 1 .5 month to prevent battery drain.
Note: When DEEBOT is not cleaning, it is recommended to keep DEEBOT powered ON and charging.
Indicator Light
DEEBOT will tell you something is wrong with an indicator light and voice report. More detailed support is available through the ECOVACS HOME and online website.
Troubleshooting
Wi-Fi Connection
Before Wi-Fi setup, make sure DEEBOT, mobile phone, and Wi-Fi network meet the following requirements.
DEEBOT and Mobile Phone Requirements
- DEEBOT is fully charged and the power switch of DEEBOT is turned on.
- Wi-Fi status light slowly flashes.
- Turn off mobile phone’s cellular data (you can turn it back on after setup).
Wi-Fi Network Requirements
- You are using a 2.4GHz or 2.4/5 GHz mixed network.
- Your router supports 802.11 b/g/n and 1Pv4 protocol.
- Do not use a VPN (Virtual Private Network) or Proxy Server.
- Do not use a hidden network.
- WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
- WEP EAP (Enterprise Authentication Protocol) is not supported.
- Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America (refer to local regulatory agency).
- If you are using a network extender/repeater, the network name (SSID) and password are the same as your primary network.
Technical Specifications
Output power of the Wi-Fi module is less than 1 00mW.
Note: Technical and design specifications may be changed for continuous
product improvement.
- CH1918 is an Auto-Empty Station that automatically empties your DEEBOT’s dustbin. Explore more accessories at https://www.ecovacs.com/global.
Ecovacs Robotics Co., Ltd.
No.518 Songwei Road, Wusongjiang industry Park, Guoxiang Street, Wuzhong
District, Suzhou, Jiangsu, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>