ECOVACS GX-600 Goat Promises Set Free Lawn Mowing User Guide

ECOVACS GX-600 Goat Promises Set Free Lawn Mowing

Unboxing Content

1. GOAT
2. Battery
3. Base
4. Extension Cable
5. Power Supply
6. Hex Key
7. Anchor Screw
8. Replacement Blade Kit
9. Installation, User Manual, and Quick Start Guide

Getting to Know Your GOAT

Product Diagram (Top View)

• Rain Sensor
• STOP Button
• Grass Cutting Height Adjustment Knob
• Command Panel
• Charge Contacts
• ToF Sensor
• Front AI Camera
• Trapdoor

Product Diagram (Bottom View)

• Front Wheels
• Blades
• Blade Disc
• All-Terrain Wheels
• Battery Compartment

Product Diagram (Rear View)

• Handle

Charging Station Diagram (Top View)

• Top Cover
• Storage Box*
• Charge Indicator Light
• Charge Contacts
• *Station consists of battery and base.
• **You can place the replacement blade kits in the storage box.

Charging Station Diagram (Rear View)

• Power Interface

Installation

1. Assemble the station
2. Insert the battery into the base until you hear a “click”.
3. If you wish to control your GOAT remotely, place the station as close as possible to an area with a strong Wi-Fi signal.
4. For the GOAT to return to the station, it will identify the edge of the lawn and move in the opposite direction of the clock’s hands until it reaches the station.
5. Ensure the grass around the station does not exceed 6 cm in length. Long grass could affect recharging. Ensure the base surface is clear of large objects, such as dead leaves.
6. Secure the station to the ground in the chosen area using anchor screws and the provided hex key.

Connecting the Power Interface to the Electrical Supply

1. Align the notch (a) and the groove (b).
2. Screw the bolt until both interfaces are interlocked.
3. Note: You can use the extension cable if necessary by connecting it to the power interface.

Connecting to the Power Outlet and Charging the GOAT

1. The indicator light on the station will be solid blue if all connections are correct. In case of connection issues, the light will be red.
2. Charge the GOAT. Ensure that the charging contacts of the GOAT are fully connected to those of the station.

Getting Started

1. Ensure the GOAT is powered on. If not, proceed as follows:
   • Open the trapdoor.
   • Press the power button for 2 seconds until the screen turns on.
2. Select the language by pressing the up or down arrows, then confirm by pressing OK.
3. Set your PIN code following the instructions provided.

Connecting Your GOAT to the App

1. Download the ECOVACS HOME app.
2. Connect the GOAT to the Internet via Bluetooth and Wi-Fi:
   • Scan the QR code or select the GOAT manually through the app.
   • Activate Bluetooth on your phone to connect to the GOAT.
   • Ensure the GOAT and phone are within 10 meters for a stable connection.
3. Canceling the association with your GOAT can be done through the app under ‘Settings’ > ‘Account and security’ > ‘Cancel Account’ > ‘Confirm cancellation’.

Using Your GOAT for the First Time

1. Manually cut grass to less than 10 cm, remove all obstacles, and ensure children do not play on the lawn while the GOAT is mowing.
2. Check that the GOAT’s battery level is above 50%.
3. If the lawn is divided into separate areas by pathways, the GOAT will only operate in the area where the station is installed. Manually move the GOAT to other areas as needed.

Specifications

FAQs

How do I set up the GOAT for the first time?

Follow the installation instructions, charge the GOAT, select your preferred language, and connect it to the ECOVACS HOME app.

Can the GOAT mow in separate lawn areas?

Yes, but you must manually move the GOAT to each area as it only operates where the station is installed.

What should I do if the GOAT's battery is low?

The GOAT has an autonomous recharging function. It will return to the station to recharge when the battery is low and continue mowing afterwards.

Is the GOAT waterproof?

The GOAT has an IPX6 water resistance rating, allowing it to remain outside. However, it is equipped with a rain sensor and will return to the station to charge when rain is detected.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>