ECOVACS DA5G.10 Floor Cleaning Robot Instructions

ECOVACS DA5G.10 Floor Cleaning Robot

Product Information

• Specifications:
  • Type of Object: Floor Cleaning Robot
  • Brand: Ecovacs
  • Model: DA5G.10

Product Usage Instructions

• Getting Started
  • Before using the Ecovacs Floor Cleaning Robot, ensure it is fully charged by connecting it to the charger.
• Setting Up
  • Place the robot on the floor in the room you want to clean and ensure there are no obstacles in its path.
• Operating the Robot
  • Press the power button to start the cleaning process. The robot will navigate around the room, cleaning as it goes.
• Maintenance
  • Regularly empty the dustbin and clean the brushes to maintain optimal performance.

FAQs

• Q: How do I schedule cleaning times?
  • A: You can schedule cleaning times using the accompanying mobile app. Simply set the desired cleaning schedule within the app.
• Q: Can the robot clean different types of floors?
  • A: Yes, the Ecovacs Floor Cleaning Robot is designed to clean various floor types including hardwood, tile, and carpet.

Important Safety Instructions

When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. SAVE THESE INSTRUCTIONS

1. This Appliance is not intended to be used by children under 8 or anyone lacking knowledge on proper use. Supervision may be necessary. Do not allow children to sit on or play with the Appliance,
2. Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Appliance. Tuck rug fringe under the rug base, and lift items such as curtains and tablecloths off the floor.
3. If there is a drop-off in the cleaning area due to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.
4. Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.
5. Please make sure your power supply voltage matches the power voltage marked on the Charging Dock.
6. For INDOOR household use ONLY. Do not use the Appliance in outdoor, commercial or industrial environments.
7. Use only the original rechargeable battery and Charging Dock provided with the Appliance from the manufacturer. Non-rechargeable batteries are prohibited. For battery information, please refer to the Specifications section.
8. Do not use without a dust bin and/or filters in place
9. Do not operate the Appliance in an area where there are lit candles or fragile objects.
10. Do not use in extremely hot or cold environments (below -5’C/23’F or above 40°C/104 F).
11. Keep hair, loose clothing, fingers, and all parts of the body away from any openings and moving parts.
12. Do not operate the Appliance in a room where an infant or child is sleeping.
13. Do not use the Appliance on wet surfaces or surfaces with standing water.
14. Do not allow the Appliance to pick up large objects like stones, large pieces of paper or any item that may clog the Appliance.
15. Do not use Appliances to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.
16. Do not use Appliance to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
17. Do not put objects into the suction intake. Do not use if the suction intake is blocked. Keep the intake clear of dust, lint, hair, or anything that may reduce airflow.
18. Take care not to damage the power cord. Do not pull on or carry the Appliance or Charging Dock by the power cord, use the power cord as a handle, close a door on the power cord, or pull the power cord around sharp edges or corners. Do not run the Appliance over the power cord. Keep the power cord away from hot surfaces.
19. If the power cord is damaged, it must be replaced by the manufacturer or its service agent to avoid a hazard.
20. Do not use the Charging Dock if it is damaged.
21. Do not use a damaged power cord or receptacle. Do not use the Appliance or Charging Dock if it is not working properly, has been dropped, damaged, left outdoors, or comes in contact with water. It must be repaired by the manufacturer or its service agent to avoid a hazard.
22. Turn OFF the power switch before cleaning or maintaining the Appliance.
23. The plug must be removed from the receptacle before cleaning or maintaining the Charging Dock.
24. Remove the Appliance from the Charging Dock, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.
25. The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance.
26. Please dispose of used batteries according to local laws and regulations.
27. Do not incinerate the Appliance even if it is severely damaged. The batteries can explode in a fire.
28. When not using the Charging Dock for a long period, please unplug it.
29. The Appliance must be used per the directions in this Instruction Manual. ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use.
30. The robot contains batteries that are only replaceable by skilled persons. To replace the robot’s battery, please contact Customer Service.
31. If the robot will not be used for a long time, power of the robot for storage and unplug the Charging Dock.

Package Contents

Package Contents and Technical Specifications

Specifications

Technical and design specifications may be changed in the course of continuous product improvement.

Product Diagram

Robot

1. Top Cover
2. AUTO Mode Button
3. Dust Bin
4. Infrared Receiver for Remote Control
5. Mechanical Cushion Bumper and Bumper Strip
6. Anti-Collision Sensors
7. Anti-Drop Sensors
8. Side Brushes
9. Charging Contacts
10. Universal Wheel
11. Suction Intake
12. Driving Wheels
13. Cleaning Cloth Plate Slots
14. Bottom Power Switch
15. Battery Cover
16. Battery Cover Screws

Control Panel

1. AUTO Mode Button
2. Wi-Fi Indicator

Charging Dock

1. Infrared Signal Generator
2. Charging Dock Pins

Remote Control

1. START/PAUSE Button
2. Direction Control Buttons
3. Return to Charger Mode Button
4. Edge Cleaning Mode Button
5. Spot Cleaning Mode Button

Dust Bin

1. Dust Bin Handle
2. Dust Bin Lock
3. Filter Net
4. Sponge Filter
5. High Efficiency Filter
6. Dust Bin Cover

Cleaning Cloth and Cleaning Cloth Plate

1. Washable/Reusable Microfiber Cleaning Cloth
2. Cleaning Cloth Plate
3. Cleaning Cloth Plate Tabs

Operating and Programming

Notes before Cleaning

Before operating DEEBOT, take a few moments to survey the area to be cleaned and remove any obstacles.

• Remove power cords and small objects from the floor that could entangle the product
• The product is not suitable for use on carpets. Before using the product near an area rug, please fold the area rug edges under themselves.
• Please be aware that the robot needs at least a 6cm (2.4″) clearance to clean under furniture without complications.
• If there is a step or stairs in the cleaning area, please operate DEEBOT to ensure it’s Anti- Drop Sensors can detect the drop-off. It may be necessary to place a physical barrier at the edge of the drop-off to keep the unit from falling over the edge.

Operating and Programming Quick Start

1. Charging Dock Placement
   • Place the Charging Dock on a level floor surface against the wall with the base perpendicular to the ground. Keep the immediate area 1.5m (5′) in front of the charger and 0.5m (1.6′) on both sides of the charger clear of objects and reflective surfaces.
   • Plug the Charging Dock in.
2. Install Side Brushes
   • Attach Side Brushes to the bottom of DEEBOT by pressing a brush into each slot with the matching colour until it clicks.
3. Power ON
   • Turn the robot’s Bottom Power Switch to the ON position. “I”=power ON; “O”=power OFF. DEEBOT is powered ON when the AUTO Mode Button glows a continuous BLUE.
   • When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging instead of powered OFF.
4. Charge DEEBOT
   • Place DEEBOT on the Charging Dock making sure the Charging Contacts on DEEBOT and the Charging Dock Pins make a connection.
   • Charge DEEBOT for at least 4 hours before the first use.
   • AUTO Mode Button blinks when DEEBOT is charging. AUTO Mode Button stops glowing after DEEBOT is fully charged.
5. Attach Cleaning Cloth, if desired
   • To use the robot’s optional mopping feature, attach the provided Cleaning Cloth.
   • When using the optional mopping feature, fold area rug edges under themselves so DEEBOT will avoid the rug.
   • Attach the Cleaning Cloth to the Cleaning Cloth Plate.
   • Insert the Cleaning Cloth Plate tabs into the Cleaning Cloth Plate Slots on the bottom of the robot until you hear a click.
6. Start
   • Press the AUTO Mode Button on DEEBOT or the START/PAUSE button on the Remote Control. DEEBOT starts to work immediately in AUTO Cleaning Mode.
   • To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details.
   • DEEBOT can be directed using the Direction Control Buttons on the Remote Control when it is Paused.
7. Pause
   • Pause DEEBOT by pressing the AUTO Mode Button on DEEBOT or the START/ PAUSE Button on the Remote Control.
   • The AUTO Mode Button on the robot’s Control Panel stops glowing after the robot is paused for more than 10 minutes. Press the AUTO Mode Button on the robot or press any button on the Remote Control to wake up the robot.
8. Power OFF
   • Pause DEEBOT. Move the Bottom Power Switch to the OFF position.
   • When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging.

Cleaning Mode Selection

• DEEBOT has several cleaning modes to choose from to effectively clean different floors. Cleaning modes are selected using the Remote Control or ECOVACS App.

1. AUTO Cleaning Mode
   • This is the most commonly used mode. In AUTO Cleaning Mode, DEEBOT cleans in a straight line and changes direction when it meets an obstacle.
2. Edge Cleaning Mode
   • This mode is good for cleaning the edges and corners of a room. In Edge Cleaning Mode, DEEBOT cleans along a border (e.g. wall).
3. Spot Cleaning Mode (1.5-5 minutes)
   • This mode is applicable for an area of highly concentrated dirt or dust. In Spot Cleaning  Mode, DEEBOT focuses on a specific area to clean.
4. Return to Charger Mode
   • When battery power gets low, DEEBOT automatically switches to Return to Charger Mode and returns to the Charging Dock to recharge itself.
   • DEEBOT can also be sent back to the Charging Dock at any time by pressing the Return to Charger Button on the Remote Control.

Operating and Programming

• Programming the Robot
  • DEEBOT has an Intelligent Scheduling and a Time Scheduling function to schedule cleaning times.
  • DEEBOT can be programmed to automatically clean with Intelligent Scheduling using the robot’s Control Panel.
  • DEEBOT can also be programmed with Time Scheduling using the App.

Intelligent Scheduling

1. Set Intelligent Scheduling
   • DEEBOT can be scheduled to clean once per day at the same time, even if nobody is at home.
   • Double-click the AUTO Mode Button on DEEBOT to set the current time as the scheduled cleaning time.
   • Intelligent Scheduling is set when the robot emits an ascending tune and AUTO Mode Button glows a continuous BLUE. DEEBOT will automatically clean at the set time every day.
   • For example Set Intelligent Scheduling successfully at 9:00 am, and DEEBOT automatically cleans at 9:00 am every day.
2. Cancel Intelligent Scheduling
   • Double-click the AUTO Mode Button on DEEBOT. The robot emits a descending tune, and the AUTO Mode Button glows a continuous BLUE. Intelligent Scheduling is cancelled.
   • To automatically clean at another time, first, cancel the current Intelligent Scheduling, then set Intelligent Scheduling again at the desired time.
   • If DEEBOT is turned OFF, Intelligent Scheduling is cancelled.

Time Scheduling

1. Set Intelligent Scheduling
   • DEEBOT can be programmed weekly to clean multiple times per day at specific times using the ECOAVCS App.
2. Status Indicator Light and Sounds
   • If DEEBOT detects a problem and needs your assistance, it emits alarm beeps and the AUTO Mode Button flashes red.

Maintenance

Before performing cleaning and maintenance, power OFF DEEBOT and unplug the Charging Dock.

Dust Bin and Filters

• Open the robot’s Top Cover and remove the Dust Bin. Open the Dust Bin Cover and empty the Dust Bin.
• Remove the filters. Pat the High Efficiency clean. Do not rinse the High-Efficiency Filter under water.
• Rinse the Dust Bin, Sponge Filter and Filter Net under running water.
• Dry the Dust Bin and filters completely before reinstalling.

Cleaning Cloth

• Remove the Cleaning Cloth Plate from the robot and remove the Cleaning Cloth.
• Wash and dry the Cleaning Cloth.
• Wipe the Cleaning Cloth Plate with a dry cloth.

Suction Intake and Side Brushes

• Wipe the Suction Intake with a dry cloth.
• Remove the Side Brushes. Wipe the Side
• Brushes and their slots with a clean dry cloth.

Other Components

• Clean the Universal Wheel by removing any hair tangled around it.
• Wipe the Anti-Drop Sensors with a dry cloth to maintain their effectiveness.
• Wipe the Charging Contacts and Charging Dock Pins with a dry cloth.

Regular Maintenance

To keep DEEBOT running at peak performance, perform the maintenance and replacement according to the following frequency. A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.

Note: ECOVACS manufactures various replacement parts and assemblies. Please contact Customer Service for more information on replacement parts.

Troubleshooting

Please use this chart to troubleshoot common problems using DEEBOT.

Congratulations on the purchase of your ECOVACS ROBOTICS DEEBOT!

• We hope it brings you many years of satisfaction. We trust the purchase of your new robot will help keep your home clean and provide you with more quality time to do other things. Live Smart. Enjoy Life.
• Should you encounter situations that have not been properly addressed in this Instruction Manual, please contact our Customer Service Center where a technician can address your specific problem or question.
• For more information, please visit the ECOVACS ROBOTICS official website: www.ecovacs.com.
• The Company reserves the right to make technological and/or design changes to this product for continuous improvement. Thank you for choosing DEEBOT!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>