Wiesemann and Theis 55614 Gigabit Switches for Control Cabinet Instructions
- August 12, 2024
- Wiesemann and Theis
Table of Contents
- Wiesemann and Theis 55614 Gigabit Switches for Control Cabinet
- Product Information
- FAQ
- Product Overview
- Industry Switches for the control cabinet – with monitor port or PoE
- Gigabit Switch Industry
- Ethernet Switch Gigabit
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Wiesemann and Theis 55614 Gigabit Switches for Control Cabinet
Product Information
Specifications:
- Manufacturer: Wiesemann & Theis GmbH
- Product Type: Industry Gigabit Switches
- Ports: Four or five Ethernet ports
- Data Rate: Up to one gigabit
- Power Supply: 24V
- Features: High noise resistance and low emissions for industrial environments
Product Usage Instructions:
The W&T Industry Switches are designed for networking components in the control cabinet, providing reliable connectivity in industrial settings. Follow the steps below to use the product effectively:
Installation:
- Choose a suitable location in the control cabinet to mount the Gigabit Switch.
- Connect the Ethernet cables from network components to the available ports on the switch.
- Ensure a stable 24V power supply to the switch.
Configuration:
- Access the switch’s configuration interface using a web browser.
- Set up IP addresses, VLANs, and other network settings as per your requirements.
Usage:
Once installed and configured, the switch will facilitate communication between network devices within the control cabinet at high data rates.
Contact Information:
If you have any questions or need assistance, you can reach out to Wiesemann & Theis GmbH at:
- Address: Porschestr. 12, 42279 Wuppertal
- Phone: +49 202/2680-110 (Mon.-Fri. 8 a.m. to 5 p.m.)
- Fax: +49 202/2680-265
- Email: info@wut.de
FAQ
- Q: Can I use regular Ethernet cables with the Industry Gigabit Switches?
- A: Yes, you can use standard Ethernet cables to connect your network devices to the switch.
- Q: What is the maximum distance supported between devices connected to the switch?
- A: The maximum distance supported will depend on the quality of your Ethernet cables and the network environment, but typically, it can range from 100 meters for copper cabling.
Wiesemann & Theis GmbH
Networking, sensors, and interface technology for industry, office, and IT
Product Overview
Gigabit Switches for mounting in the control cabinet
Industry switches with monitor port or PoE
The compact W&T Industry Switches connect network components in the control cabinet.
- Four or five Ethernet ports
- Data rate up to one gigabit
- High noise resistance and low emissions for industrial environments
Industry Switches for the control cabinet – with monitor port or PoE
Gigabit Switch Industry
Networking in the control cabinet 24V supply voltage
Ethernet Switch Gigabit
Industry PoE
Ethernet Switch Gigabit Industry PoE in control cabinet with 4x PoE+
We are available to you in person:
- Wiesemann & Theis GmbH
- Porschestr. 12
- 42279 Wuppertal
- Phone: +49 202/2680-110 (Mon.-Fri. 8 a.m. to 5 p.m.)
- Fax: +49 202/2680-265
- info@wut.de
© Wiesemann & Theis GmbH, subject to mistakes and changes: Since we can make mistakes, none of our statements should be applied without verification. Please let us know of any errors or misunderstandings you find so that we can become aware of and eliminate them.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>