KALLEY G3 Smart Phone User Guide
- August 27, 2024
- Kalley
Table of Contents
Kalley Black G3 Smart Phone
Quick Start Guide
BEFORE USING
The phone is a Dual SIM mobile that allows you to use two mobile networks.
Insert SIM cards and SD card
-
This machine supports standard Nano card hot-swappable, in the power-on state, when you insert the Nano card, the phone can automatically identify.
Insert the thimble into the thimble hole and press inward, the card tray pops out.
Take out the card tray, play the Nano card with chip facing down into the corresponding card slot. Then put the card tray into the phone. Make sure that it is correctly inserted. -
To have additional storage for your images, videos, music and files, you can purchase a memory card and install it in your device. Insert the thimble into the thimble hoe and press inward, the card tray pops out. Put the SD card with chip facing downwards into t
✓ Note: SD card can be used as internal storage.
Option : Notification Center–> Tap the notice to set up–>Use for portable
storage ->Next
->Done(For transferring files and media between devices)
✓ Note:
- Do not remove the cards while the device is transferring data. Doing so may cause data to be lost or damage to the cards and device.
- The SIM cards and SD card are small parts. Please keep them away from children to avoid swallowing the card by accident.
- Please do not touch the metal surface of SIM and SD card and keep them away from electromagnetic field to avoid damaged data.
Charge the Battery
Charge the battery before using it. Connect the USB cable to the USB power
adaptor, and then plug the end of the USB cable into the USB Port.
GETTING STARTED
Basic Function
-
Turn on the phone
Press and hold the power key for a while to turn on the phone. -
Turn off the phone
Long press the power key until a menu shows. Choose “Power off’’ to turn off the phone. -
Restart the phone
Long press the power key until a menu shows. Choose “Restart’’to restart the phone. -
Lock the screen
Option 1: Press the power key to turn off the screen and lock it
Option 2: The screen will auto lock if you don’t use the phone for a while. -
Unlock the screen
Press the power key, and then slide to top for unlocking.
COMMUNICATION & CONNECTION
Make a call
- Touch the phone icon on the Home screen.
- Enter the phone number you want to dial.
- Touch the phone icon to dial the number that you entered.
Send a Message
You can use this phone to exchange text messages and multimedia messages with
others. The messages from the same contact will be grouped into one
conversation list. So you can see your entire message history with a person
conveniently.
WLAN
WLAN is a wireless networking technology that can provide internet access at
distance of up to 100 meters, depending on the WLAN router and your
surroundings. You can configure the WLAN as follow:
• Settings– >Network & internet–>Internet–>Wi-Fi to turn it on.
The device scans for available WLAN networks and displays the names of those
it finds.
Tap one of the listed networks and enter the password, if asked to join in.
WARNING
The power supply type is UT-681A-5200ZCY, output is 5V/2A .the device is restricted to indoor use only when operating in the 50-60 Hz frequency range
| US| AU| CA| IN| IE| NZ
---|---|---|---|---|---|---
SG| ZA| GB| FR| BE| CA
CH| AE| BH| DZ| EG| IQ
JO| KW| LB| LY| MA| OM
QA| SA| SD| SY| TN| YE
| Supports Bands (MHz) :| Max Power:
---|---|---
GSM| GSM850 : Tx 824-849, Rx 869-894| 32±1dBm
GSM900 : Tx 880-915, Rx 925-960| 32±1dBm
DCS1800 : Tx 1710-1785, Rx 1805-1880| 29±1dBm
PCS1900 : Tx 1850-1910, Rx 1930-1990| 30±1dBm
WCDMA| WCDMA Band 1 : Tx 1920-1980, Rx 2110-2170| 22.5±1dBm
WCDMA Band 2: TX 1850-1910,RX 1930-1990| 22±1dBm
WCDMA Band 4: Tx 1710-1755, Rx 2110-2155| 22±1dBm
WCDMA Band 5: TX 824-849,RX 869-894| 22±1dBm
LTE| LTE Band 2:Tx 1920-1980, Rx 2110-2170| 23.0±1dBm
LTE Band 3:Tx 1710-1785, Rx 1805-1880| 22.5±1dBm
LTE Band 4:TX 824-849,RX 869-894| 23.0±1dBm
LTE Band 5:TX 824-849,RX 869-894| 23.0±1dBm
LTE Band 7:TX 2500-2570,RX 2620-2690| 23.0±1dBm
LTE Band 13:Tx 880-915, Rx 925-960| 23.0±1dBm
LTE Band 28A & 28B:TX 703-748,RX 758-803| 23.0±1dBm
WLAN| Frequency (MHz) :| MaxPower:
B/G: 16.0±1dBm
2412-2472
WLAN| Frequency (MHz) :| MaxPower:
N: 17.5±1dBm
2412-2472
BT| Frequency (MHz) : 2402-2480| MaxPower: 5.0±1dBm
Emergency call
If any emergency arises, dial 112/911 (or other emergency call number) for
emergency help.
Due to the nature of cellular networking, the success of emergency call is not
guaranteed.
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types Smart Phone (FCC ID: 2AEPIBLACKG3) has also been tested against
this SAR limit. The highest reported SAR values for head, body-worn accessory,
and product specific (Hotspot) are 0.979 W/kg, 0.908 W/kg, and 1.056W/kg
respectively. The Max simultaneous SAR is 1.236 W/kg. This device was tested
for typical body-worn operations with the back of the handset kept 10mm from
the body. To maintain compliance with FCC RF exposure requirements, use
accessories that maintain a 10mm separation distance between the user’s body
and the back of the handset. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.