THITRONIK 101052 Safe.Lock Conversion PCB Instructions

Art.Nr.: 101052
safe.lock conversion pcb

101052 Safe.Lock Conversion PCB

safe.lock closes the security gap in the central locking system of the affected vehicles. It controls the central locking over the delivered safe. lock conversion pcb, thus avoiding the unsafe wireless control of the original vehicle key. By activating the central locking system the safe.lock conversion pcb controls the safe.lock module, resp. the WiPro III safe.lock which is connected to the vehicle system.

1. Inserting the conversion pcb into the vehicle key
   Please contact a Thitronik safe.lock premium partner in order to get the immobilizer transponder copied. You can find a premium Partner under: https://www.thitronik.de/en/dealerfinder. If you fail to do so, you won’t be able to start the engine with the vehicle key.
   – Open the key housing
   – Pull out the original electronics
   – Fix the copied transponder into the housing (see below)
   – Insert the conversion pcb
   – Mount the vehicle key

2. Programming and deleting of conversion pcb‘s and/or wireless remote controls As described in the manual of the respective product (safe.lock module/WiPro III).

3. Usage
   With the modified vehicle key you can as usual use your vehicle. An exception is a vehicle key with three buttons, by which a separate unlocking of the load compartment is technically impossible. Both unlock buttons will unlock the entire vehicle. The optionally available wireless remote control has accordingly marked lock and unlock buttons.

Technical specification:

Power supply: 3V (CR2032)
Battery life: appx 2 years (depending on usage)
Transmission frequency/-power:868,35 MHz / < 10 mW
Temperature range: -20°C up to +80°C

Scope of delivery: safe.lock conversion pcb

Tutorial video for opening the key: open the following link:

safe.lock conversion pcb

Thitronik GmbH hereby declares that this product complies with the requirements and regulations of the directive 2014/53/EU. The full declaration of conformity is available for download: http://www.thitronik.de/en/support

Hersteller:
Thitronik GmbH · Finkenweg 11 – 15 · 24340 Eckernförde
www.thitronik.de

www.thitronik.de
Art. Nr.: 101052

Documents / Resources

| THITRONIK 101052 Safe.Lock Conversion PCB [pdf] Instructions
101052, Safe.Lock Conversion PCB, 101052 Safe.Lock Conversion PCB, Conversion PCB, PCB
---|---

References

• Startseite | Thitronik GmbH
• Support | Thitronik GmbH
• Support | Thitronik GmbH
• Dealerfinder | Thitronik GmbH
• Händlerfinder | Thitronik GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>