HEDGEHOG DRYER 209758 Hanger Shoe and Glove Dryer Instruction Manual
- August 9, 2024
- HEDGEHOG DRYER
Table of Contents
HEDGEHOG DRYER 209758 Hanger Shoe and Glove Dryer
Product Specifications
- Models: H-OCT-WST, H-HAN-WST, H-WAL-WST, H-OCT-BST, H-HAN-BST, H-WAL-BST, H-OCT-WIO, H-HAN-WIO, H-WAL-WIO, H-OCT-BIO, H-HAN-BIO, H-WAL-BIO, H-WFA-WST, H-WFA-BST, H-WFA-WIO, H-WFA-BIO, H-WFA-HST, H-HFA-BST, H-WFA-HIO, H-HFA-BIO
- Certifications: CONFIRMS TO UL STD.499 CERTIFIED TO CSA STD. C22.2 NO.64
- Voltage supply: 125V ~ 60 Hz
- Power: 700 W
- Protection class: II
Product Usage Instructions
Safety Instructions
- Make sure to follow these safety instructions to ensure proper usage
- Use the OCTOPUS or FAMILY for hanging on the wall to avoid weight restrictions.
- Avoid applying more than 0.5 kilograms per spike.
- Do not dry ski boots on the hanger.
- Dry leather or sensitive materials at 37 degrees Celsius or room temperature.
Installation Instructions
- Screw the hook into the fan unit and tighten it with a wrench tool.
- Slide the nozzle onto the fan unit in the correct orientation.
- Screw all pipes ensuring not to tighten too hard.
- Click together the components without excessive force.
- Mount the fan wall to the wall using a 6mm drill bit and expansion screw if needed.
How to Use
- Hang up mitten gloves or shoes on the spike.
- Open the air vent by pushing it up.
- Turn on the device to start the drying process.
Troubleshooting and Error Codes
- If 3 RED LEDs flash for 5 seconds and then turn off, check for overheating due to lack of air circulation.
- If the 1st RED LED flashes for 5 seconds and then turns off, it indicates a safety protection issue with the heating sensor.
- If 5 BLUE LEDs flash for 5 seconds and then turn off, there may be a problem with the engine.
FAQ
Q: Can I repair the device myself if there is an issue?
A: No, do not attempt to repair an electrical device yourself. Contact customer support for assistance.
Q: What should I do if the plug does not fit in the outlet?
A: If the plug does not fit, contact a qualified electrician. Do not modify the plug in any way.
Welcome to the Hedgehog family!
- We’re so happy to have you as part of our growing family. Our goal is to provide you with a complete drying and organizing solution that will keep you (and your little hedgehogs) warm and dry, regardless of rainy or snowy weather outside.
- Please read these instructions carefully before use, and keep them for future reference. We are a new company and would love your feedback. Please share your comments and questions with us at info@hedgehogdryer.com.
Enjoy life!
- The Hedgehog Family
- For more inspiration and resources, visit us at www.hedgehogdryer.com
- DESIGNED IN HEMSEDAL, NORWAY
SAFETY INSTRUCTIONS
| WEIGHT restrictions for HANGER and WALL
• DO NOT DRY heavy boots such as ski boots on HANGER or WALL, use the OCTOPUS or FAMILY for this.
• No more than 4 kilograms weight total on Hedgehog HANGER or WALL.
• No more than 0.5 kilograms of weight per spike/branch/arm, or it may break.
---|---
****| • The Dryer Fan Unit must not be used by people with impaired
motor skills (including children), impaired mental function, or people who
lack the necessary experience and knowledge.
• Children must be under supervision at all times to ensure that they do not play with the appliance.
****| • Connect the device’s electric cord to a secure electrical outlet while in use.
• If the electric cord is damaged in any way, do not use the device.
• Make sure there are no other devices connected to the same electric circuit, to prevent overload on the circuit.
• Never let the cord be in contact with the dryer.
• Do not carry the device by its electric cord.
• Disconnect the device from the wall outlet when not in use.
| • Intended for indoor use only.
• Never touch the device during drying, it may get hot.
• Never cover the device, block or insert objects into the air inlet or outlet.
• Never use close to water or in rooms with humidity, such as bathrooms, pools, showers, or sinks.
• The device must not be immersed in water or other liquids. Should it come into contact with water, immediately pull the plug out of the socket.
• Do not use fittings and/or accessories that have been modified or that have not been approved by the manufacturer.
• If broken, damaged, or malfunctioning in any way, do not use it. Either discard or contact the point of sale.
**| EE WASTE – BE NICE TO NATURE**
This product is considered as Electric Electronic waste and needs to be disposed of as electronic waste at a location for recycling. For more detailed information on recycling this product, contact the municipal office, the local waste disposal service, or the store where it was purchased.
According to the EU directive 2012/19/EU and 2006/66/EC.
HEDGEHOG HANGER with Wall mount
HOW TO USE
- Hang up the mitten glove or shoe on a spike
- Open air vent (push-up)
- Turn on device
WARNINGS
- Never apply more than 0.5 kilograms per spike
- Never dry ski boots on Hanger. They are too heavy!
- Dry leather or sensitive materials at 37 degrees or room temperature
TROUBLESHOOTING AND ERROR CODES
- 3 RED LEDs flashing 5 seconds and off.
- Overheating due to lack of air circulation. Make sure the inlet and outlet are open. Check if 2 or more air vents are open on the Hanger and Wall.
- Restart. If the problem continues, contact customer support.
- 1st RED LED (37 LED) flashing 5 seconds and off. Safety protection:
- If a heating sensor does not work – contact customer support.
- 5 BLUE LEDs flashing for 5 seconds and off.
- If the engine is defective or cannot run – contact customer support.
Do not attempt to repair an electrical device yourself
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
- If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Technical Data
Models:
- H-OCT-WST, H-HAN-WST
- H-WAL-WST, H-OCT-BST
- H-HAN-BST, H-WAL-BST
- H-OCT-WIO, H-HAN-WIO
- H-WAL-WIO, H-OCT-BIO
- H-HAN-BIO, H-WAL-BIO
- H-WFA-WST, H-WFA-BST
- H-WFA-WIO, H-WFA-BIO
- H-WFA-HST, H-HFA-BST
- H-WFA-HIO, H-HFA-BIO
Certifications
- CONFORMS TO UL STD.499
- CERTIFIED TO CSA STD. C22.2 NO.64
- Voltage supply: 125V ~ 60 Hz
- Power: 700 W
- Protection class: II
- For support, tips and other products, see www.hedgehogdryer.com
- Toll Free Number: 1 800 417 5017
- © 2021 Hedgehog AS. All rights reserved. Hedgehog and the Hedgehog logo are trademarks of Hedgehog AS registered in Norway and other countries.
- All technolgy and designs are patented.
References
- Commercial Dehydrator Systems | Bulk Drying Solutions
- Hedgehog Dryer - Up to 5 times faster drying – hedgehogdryer-eur
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>