Biuged BGD 180 Intelligent Touch Screen Rotothinner Instruction Manual

August 9, 2024
Biuged

Biuged BGD 180 Intelligent Touch Screen Rotothinner

Biuged-BGD-180-Intelligent-Touch-Screen-Rotothinner-
PRO

Product Information

Specifications

  • Product Name: B GD 180 Intelligent Touch-screen Rotothinner
  • Function: Rotary viscometer to measure sample viscosity under different shearing rates
  • Measuring Ranges:
    • No.1 Disc Spindle: Up to 1,500 mPa s at 200S-1 shear rate
    • No.2 Big Ball Spindle: Up to 6,500 mPa s at 44S-1 shear rate
    • No.3 Small Ball Spindle: Up to 34,000 mPa s at 20S-1 shear rate
  • Container: 250 ml standard container (Inner diameter: 74mm, Height: 74mm)
  • Reading Modes: Manual, Holding max. value, Timing reading

Product Usage Instructions

Step 1: Setup
Place the desired spindle based on the viscosity range you want to measure.

Step 2: Preparation
Pour the sample into the standard container ensuring it meets the required volume.

Step 3: Measurement
Initiate the measurement using the touch-screen interface and select the appropriate reading mode.

Step 4: Analysis
Record the viscosity readings displayed on the screen for analysis or comparison.

Frequently Asked Questions (FAQ)

  • Q: Can I use this viscometer for non-Newtonian fluids?
    A: No, this viscometer is designed for use with Newtonian fluids only.

  • Q: How do I clean the spindles after use?
    A: The spindles can be cleaned using a suitable cleaning solution and dried thoroughly before next use.

  • Q: Can I calibrate this viscometer?
    A: Yes, calibration instructions are provided in the user manual for accurate measurements.

Product Introduction

BGD 180 Intelligent Touch-screen Rotothinner is a simple, easy-to-use rotary viscometer, it is used to measure sample viscosity character under three different shearing rates 20S 44S 200S and also can be used to measure viscosity character of same sample depending shearing time. It complies with ISO 2884-2 Paints and varnishes Determination of viscosity using rotary viscometers- Part 2:Disc or ball viscometer operated at a specified speed and BS 3900 A7 standards etc.

Features

  • Comes with three spindles as below meets different measuring ranges:
  • No.1 Disc Spindle: for use with viscosities up to 1,5 Pa s (1,500 mPa s), with an average shear rate of approximately 200S-1 with a Newtonian fluid.
  • No.2 Big ball Spindle: for use with viscosities up to 6,5 Pa s (6,500 mPa s), with an average shear rate of approximately 44S-1 with a Newtonian fluid.
  • No.3 Small ball Spindle: for use with viscosities up to 34 Pa s (34,000 mPa s), with an average shear rate of approximately 20S-1 with a Newtonian fluid.
  • 250 ml Standard container which complies with standard requirements: Inner diameter is 74mm, Height is 74mm
  • Three reading modes: Manual, Holding max. value, and Timing reading

Main Technical Parameters

  • Range: 0 ~ 34Pa.s (0 ~ 34000 mPa.s )
  • Accuracy: # 1.0% of full-scale range
  • Repeatability: # 0.5% of full-scale range
  • Paddle Speed: 562 rpm + 2%
  • Container Capacity: 250ml
  • Power Supply: 220V 50Hz
  • Overall Dimensions: 230mm x 180mm x 465mm ( L x Wx H
  • Net Weight: 3 KG
  • Ordering Information:
    BGD180— intelligent Touch-screen Rotothinner

Tel: +86-20-82169666
E-mail: sale: jack@biuged.com
Service: service@biuged.com
WhatsApp: +86-13316053991
Website: www.biuged.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals