Locke Washer Dryer User Manual

User manual.

Getting to know the appliance

Appliance

1. Detergent drawer
2. Operating/display panel
3. Loading door
4. Service flap

Control panel

**1. Indicator lamp***
Indicates the settings that have beenselected for:

• Temperature 90°C
• Spin speed 1400 rpm.
• Options/signal

**2. Display Panel***
Shows the settings that have been selected (e.g. spin speed, drying time), the progress of the current programme and the programme status.

• Programme progress:
  (Prewash)
  (Main Wash)
  (Rinse)
  (Final Spin)
  (Drying)‘

• Drying options:
  (Time-controlled drying)
  (Iron-damp)
  (Cupboard dry)
  (Extra-dry)

• Auxiliary displays:
  (programme start)(Finished
  in time)
  (Childproof lock)
  (Fluff removal cycle)
  kg(reccomended load)

**3. Buttons***

• Temperature °C: individual adjustment of the washing temperature.
• Spin speed : individual adjustment of the spin speed.
• Options button: sets washing options.
• Set: activation/deactivation of the selected washing options.
• Finished In delays the Programme start.
• Drying‘ : sets the drying options

Start/Pause starts and stops the washing programme.

**4. Programme selector**
For switching the washer-dryer on and off and for selecting the programme, can be turned in both directions. Do not adjust the programme selector while washing/drying is in  progress. Depending on the model.

Options

set the spin speed, press the B (Spin) button repeatedly until therequired spin speed is displayed.
Rinse hold| Deactivates the spin function. The laundry remains in therinsing water.
Intensive| Prolonged washing time. Suitable for particularly heavily soiled laundrywith dried-on stains. Cannot be combined with Flexi Time
Easy-iron| Special spin sequence with subsequent fluffing. Gentle final spin atreduced speed. Slightly increased residual moisture in the laundry.Reduces creasing and laundry is easier to iron.
Water plus| Increased water level and additional rinse cycle. For regions with very softwater or for further improving the rinsing result. Any detergent residuesare removed.
Flexi Time| Sets the washing time. normalmedium-short.
Signal| Activates or deactivates the audible signal.
Finished In| You can postpone Programme start before it begins. Using the Remainingtime, you can determine when the selected programme is to end. Theremaining time can be set in one-hour increments, up to a maximum of24 hours. Press the 0 (Finished in) button repeatedly until the requirednumber of hours is displayed.Then press the A (Start/ Pause) button, the programme will start after adelay according to  the set Remaining time. The required time to the endof the programme is shown on the display panel..

Drying options

the drying options.– Press the Drying button repeatedly until the required drying option is shown on the display panel.– To deactivate, press the Drying button repeatedly until 00:00 is shown on the display.
(Time-controlled
drying)| The drying time can be set to between 2:40 and 0:00 by repeatedly pressing theDrying button.
(Irondamp)| The residual moisture in the washing is increased. Enables easier ironing..
(Cupboard dry)| The laundry is dry and ready to put away
(Extra-dry)| The laundry is dried intensively.
Suitable for laundry that is hard to dry.
The laundry is dry and ready
to put away| The laundry is dried intensively.
Suitable for laundry that is hard to dry.

Washing only

• Turn the programme selector to the desired programme,e.g.Cottons 60°C
  – The display panel alternately shows Remaining time and the recommended load inkg

• If necessary, adjust the temperature and the spin speed and select any options for your individualised programme.
  – The (Drying) function must not be activated.

• Load the laundry.
  – Observe the maximum load.
  – Programme table.

• Press theStart/Pause
  – Remaining time is shown on the display panel
  – The washing programme starts.

Drying only

• Turn the programme selector to the desired drying programme
  – The display panel alternately shows
  Remaining time and the recommended load in kg.

• Press the (Drying)button to set the drying options.
  – If you do not make a selection, the (Cupboard dry)option is set.

• Load the laundry.
  – Observe the maximum load.
  – Programme table.

Washing and drying

• Turn the programme selector to the desired programme,e.g.Cottons 60°C
  – The display panel alternately shows 2(Remaining time) and the commended load and thekg

• If necessary, adjust the temperature and the spin speed and select any options for your individualised programme.

• Press the (Drying) button to set the drying options.

• Load the laundry.
  – Observe the maximum load.
  – Programme table.

• Press theStart/Pause

The drying programme that is carried out is automatically determined by the washing programme, see the Programme table. Changing the programme

To change the programme:

• Select a new programme.
• Press the Start/Pause button.

The new programme starts.

End of the programme

• The washing and drying programmes are ended automatically. “ appears on the display panel.
  – Turn the programme selector to Off.
  – Remove the washing from the drum.
  – Leave the door open to allow the inside of the washer-dryer to dry out.
  – Turn off the tap (not necessary on models with Aqua-Stop).

Cancelling the programme
Press and hold button Start/Pause until is displayed. For washing programmes at high temperatures:

• Cooling down laundry: choose + +Spin
• Press the Start/Pause button.

For programmes at low temperatures:

• Choose + +Spin
• Press the Start/Pause button.

If you cancel the Drying programme, the laundry may still be very hot.

Rinse hold

• If the spin function was deactivated at the start of the wash cycle, the washing programme is automatically stopped after the final rinse.
  The display panel shows alternating with In order to drain the rinsing water and, if required, spin the laundry:
  – Press theSpin repeatedly until the required spin speed is set. The water is Drained and the washerdryer spins the laundry. Theprogramme is completed when appears in the display field.
  – The maximum spin speed depends on the selected wash programme. If you do not wish to spin the laundry:
  – Press the Spin button (remaining time for Draining is displayed). The water is Drained, but the washerdryer does not spin the laundry. The programme is complete when appears on the display panel.
  – Set the programme selector to Off
  – Remove the laundry.
  – Leave the door open to allow the inside of the washer-dryer to dry out.
  – Turn off the tap (not necessary on models with Aqua-Stop).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>