Falebare 6S Wireless Headphones Instruction Manual

6S Wireless Headphones
Instruction Manual

Package Contents

Before Use

1. Turn off the headsetuse the charging cable to connect the charger/computer/charging bank/etc to charge;
   Note: Before using the headset for the first time charge for at least 2 hours;

2. The red LED will turn on to indicate that the unit is charging;Once fully charged,the red LED will turn blue.
   Tips: Do not turn on the headset when charging headset, or else it will lower the quality and the life of battery.

Connect

1. Place headset within 35ft from Bluetooth-enabled device.
2. Long press, the headset will be turned on. You will hear a prompt
3. After opening the phone Bluetooth,click the < 6S > to pairing.
4. The headset will automatically tum off after half an hour without pairing.
   NOTE: If the red and blue lights flash alternately,the Bluetooth is not connected; The BLUE light is always on, indicating that the Bluetooth is connected; Red light always on, indicating that the headset is low battery/tum off/charging.

Audio Line

Operation

1. • Power on/Off
   • Turn on/off the headphone

2. • NextNolume+
   • Press once: the next song/channel
   Long press: increase the volume

3. • M IC

4. • Indicator light

5. • Audio I/O Interface
   • Connect the external device with 3.5mm audio cable, achieve audio output, e.g. speaker.

6. • TF card slot
   • Insert TF card, playing MP3 song files

7. • PreviousNolume-
   • Press once: the previous song/channel
   Long press: decrease the volume

8. • Micro Charging Port.

9. • Play/pause/call control
   • Control music and calls

10. • Equalizer/Bluetooth/FM/TF
    • Press once to change the sound effect(6 choice); Long press 3s to switch the mode among bluetooth, FM, IF

Safety Information

• If no pairing connection after the headset enters the pairing mode, please turn off the headset to save power.
• Do not perform other operations while pairing the headset to prevent the program error.
• Please select a proper volume while using to prevent damage to your ears.
• Please note that a good environment for using the headset can avoid damage to the headset.
• Please charge the headset after a long time none-use.
• When its charging with a USB cable, please turn off the power in order to avoid noise.

If headphones have any connection or function problems , please reset the headphones.

1. Delete the Bluetooth pairing information on the phone.
2. Long press the M button for 3 seconds until the flash quickly with red and blue.
3. Connect to the phone Bluetooth again. (If the above operation does not workplease try again.)

Specifications

Q&A

Q: Does the Mic work while wired?

A:Yes; You need to plug in the 3.5mm audio cable. In order to ensure better sound reception,you can call at the microphone

Q:Can the Bluetooth headphones be paired with multiple devices?

A:It is recommended that you do not connect two devices at the same time, which may cause Bluetooth interruption or channel error; If another device is not needed, it is recommended to cancel Bluetooth pairing directly

Q:How to use FM mode?

A:Long press the M key to enter the radio mode. Continue to press the middle key to search for the radio signal. The radio mode can only sound after searching for the radio signal.

Q:What if the Headphones is defective OR it just doesn't meet your expectation?

A:We admit that the headphones might be defective on rare occasions. If that happens,Please contact us,and we will give you a satisfactory reply within 24 hours.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>