masaya co 1066 Apanas Bench Installation Guide
- August 9, 2024
- Masaya Co
Table of Contents
masaya co 1066 Apanas Bench
Product Information
Specifications
- Product Name: Apanas Bench
- SKU: 1066
- Material: Wood
- Dimensions: (provide specific dimensions if available)
Product Usage Instructions
- Step 1: Place the Solid Top (Piece 1) face down on an elevated and soft surface. Position the Frame Legs (Piece 2) on the table top and attach them securely in place.
- Step 2: Use the Decorative Heat Bolt 13mm x 40mm (Pieces 4) to screw both legs onto the bench. Rotate the bolts without over-tightening until the legs are fully secured. Utilize the Allen Hex Key provided for this step.
- Step 3: Repeat the same process with the Decorative Heat Bolt 13mm x 65mm (Pieces 3) on the inner holes of the bench for additional support.
Customer Service
If you require any assistance during assembly or have any questions, please
feel free to contact our Customer Service Teamat:
- Phone: (615) 953 – 9373
- Email: customerservice@masayacompany.com
- Website: www.masayacompany.com
FAQ
-
Q: What should I do if a piece is missing from my package?
A: If any piece listed in the manual is missing, please contact our Customer Service Team immediately for assistance in resolving the issue. -
Q: How can I ensure the longevity of my Apanas Bench?
A: Regularly clean and maintain your bench by wiping it with a damp cloth and avoiding exposure to direct sunlight or extreme weather conditions.
Apanas Bench SKU 1066
Thank you for supporting our mission to create a greener planet through
reforestation. Before starting, please make sure all pieces listed in this
manual are complete. And save this manual for for future reference. When
assembling, we recommend placing all wooden parts on a soft, clean and flat
surface to avoid scratches and damange while assembling your brand new
MasayaCo piece.
Need any assistance?
Feel free to contact our Customer Service Team. (615) 953 – 9373,
customerservice@masayacompany.com
or using our chat on www.masayacompany.com
15 Min 1 person Allen Hex Key
Tools
Assembly Instruction
Step 1
Place Top (Piece 1) face down on an elevated and soft surface then place the
legs (Piece 2) on the table top and attach them in place.
Step 2
Screw both the legs with the ( Pieces 4) Rotate bolts without over-tightening
until the leg is fully secured. To secure this please use the Allen Hex Key
included.
Step 3
Repeat the same action with the pieces E on the inner holes