HAVIT COMMERCIAL HCP Series Single Circuit Track Installation Guide
- August 8, 2024
- HAVIT COMMERCIAL
Table of Contents
- HAVIT COMMERCIAL HCP Series Single Circuit Track
- Product Information
- Product Usage Instructions
- Specifications
- Important Safety Issues
- Sample Installation Diagram
- Dimensions
- Installation Instruction
- Connection Wiring Diagram
- Warranty Terms & Conditions
- Contact Details
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HAVIT COMMERCIAL HCP Series Single Circuit Track
Product Information
Product Specifications
- Model No: HCP-102110, HCP-102120, HCP-102130, HCP-103110, HCP-103120, HCP-103130
- Material: Aluminium + Plastic
- Color: Black, White
- Length: 1m, 2m, 3m
- IP Rating: IP20
- Track Type: Single Circuit – Surface Mounted
- Input Voltage: 240v
- Protection Class: 1 (Requires Earth)
- Max Load: 8A
- Warranty: 5 Years Replacement*
Product Usage Instructions
Surface Mounted Installation
- Make sure that the electrical circuit is free of voltage (master switch off)
- Remove the cover from the live end and set aside
- Insert Cables into the live end and screw the track into place using the appropriate screws for application.
- Connect the earth cable first then the Live and Neutral cables
- Reattach cover to Live end
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Track Head Installation
Must be installed by a licensed electrician.
Contact Details
- **Warranty Terms & Conditions***: www.havitcommercial.com.au
- Tel: 02 9381 8383
- Email: sales@havitcommercial.com.au.
- Address: 8/133 Beauchamp Road, Matraville NSW 2036, Australia
- Web: www.havitcommercial.com.au
FAQ (Frequently Asked Questions)
-
Q: What is the warranty period for this product?
A: The product comes with a 5-year replacement warranty.* -
Q: What is the maximum load this track can handle?
A: The track has a maximum load capacity of 8A.
Specifications
Model No.| HCP-102110| HCP-102120| HCP-102130| HCP-103110| HCP-103120|
HCP-103130
---|---|---|---|---|---|---
Material| Aluminium + Plastic| Aluminium + Plastic
Color| Black| White
Length| 1m| 2m| 3m| 1m| 2m| 3m
IP Rating| IP20| IP20
Track Type| Single Circuit – Surface Mounted| Single Circuit – Surface Mounted
Input Voltage| 240v| 240v
Protection Class| 1 (Requires Earth)| 1 (Requires Earth)
Max Load| 8A| 8A
Warranty| 5 Years Replacement| 5 Years Replacement
Important Safety Issues
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Commercial does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- Aluminium and 304SS fittings must not be installed within 5km of any saltwater environments.
- All o-rings and seals must be in place correctly to maintain warranty
- This form may be updated at any time due to product improvements, please check the online installation form for the most current version.
Sample Installation Diagram
Ceiling
Dimensions
Installation Instruction
Steps for Surface Mounted Installation:
- Make sure that the electrical circuit is free of voltage (master switch off)
- Remove the cover from the live end and set aside
- Insert Cables into the live end and screw the track into place using the appropriate screws for application.
- Connect the earth cable first then Live and Neutral cables
- Reattach cover to Live end
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Steps for Track Head Installation:
- Make sure that the electrical circuit is free of voltage (master switch off)
- Slide locking pin on base to open position
- Insert track light into track making sure connection points are on the correct side of the track
- Slide the locking pin into the closed position
- Direct light fitting to desired position by twisting left and right or up and down making sure not to twist too far to avoid damaging fitting.
- Repeat these steps if more than 1 fitting is being installed
- All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Connection Wiring Diagram
Warranty Terms & Conditions
Contact Details
- 8/133 Beauchamp Road Matraville NSW 2036 Australia
- Tel: 02 9381 8383
- Email: sales@havitcommercial.com.au
- Web: www.havitcommercial.com.au.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>