Havit Commercial HCP-91306 Twin Spot Emergency Light Instruction Manual
- July 20, 2024
- HAVIT COMMERCIAL
Table of Contents
Havit Commercial HCP-91306 Twin Spot Emergency Light
Specifications
- Product Name: HCP-91306 Twin Spot Emergency Light
- Operating Supply : 220-240V / 50-60Hz
- Compliance : AS 2293
- Viewing Distance: 24m
- Mounting : Wall Mount
Product Usage Instructions
Installation
- Ensure the electricity supply is switched off and isolated before starting the installation.
- Drill fixation holes in the wall at the designated points.
- Mount the emergency light to the wall using screws at the fixation points.
- Connect the light to power using the provided flex and plug, ensuring the circuit is on a permanent active.
Maintenance:
Regularly check the functionality of the emergency light and ensure it is
working properly. Clean the light fixture as needed to maintain brightness and
visibility.
Important:
It is illegal for anyone, except for a licensed electrician to install or
maintain this product. Before installation, ensure that the electricity supply
has been switched off and isolated. Installation must be carried out in
accordance with the relevant Australian and International Standards
Note:
For first usage, power ON the unit for 24 hours to fully charge the battery.
Interrupting the mains supply will discharge the battery.
Testing:
- The emergency lamp must illuminate for at least 90mins after disconnection from the mains.
- Press and hold Test Button or switch Off Mains Supply, check the emergency lamp is ON.
- Released the Test Button or Switch On Mains Supply, check the normal lamp is ON (Maintained operation).
Warranty
- Products have 3 years (from date of purchase) replacement warranty including battery.
- Products have to be connected to permanent live power otherwise warranty will be void.
- Must be installed by licensed electrician.
- This warranty does not cover loss or damage by misuse, incorrect installation, incorrect voltage or unauthorized electrical connections, adverse external conditions (such as power surges and dips, exposure to heat, corrosion etc).
- Products that have been altered in any way or used other than in accordance with instruction are not covered by this warranty.
Contact Details:
For installation or maintenance, contact a licensed electrician. For product
inquiries, reach out to:
- 8/133 Beauchamp Road Matraville NSW 2036 Australia
- Tel : 02 9381 8383
- Email : sales@havitcommercial.com.au
- Web : www.havitcommercial.com.au
Please refer to the Warranty Terms & Conditions for information on product warranty.
FAQ
Q: Can I install the HCP-91306 Twin Spot Emergency Light myself?
A: It is illegal for anyone other than a licensed electrician to install or
maintain this product
Q: What should I do if the emergency light is not functioning?
A: Contact a licensed electrician for maintenance and repairs.