TEMPTECH SKX6080DRB Wine Coolers User Manual
- August 8, 2024
- TEMPTECH
Table of Contents
- ENERGY SAVING AND ECOLOGICAL PROTECTION
- IMPORTANT SAFETY INFORMATION
- SCRAPPING OLD APPLIANCES
- INSTALLATION
- BOTTLE LOADING CAPACITY
- ACCESSORY INSTALLATION BEFORE OPERATING
- OPERATING THE WINE COOLER
- CONTROL PANEL IN CABINET
- CARE AND MAINTENANCE
- TROUBLESHOOTING
- INSTALL THE FRONT LOUVER
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**TEMPTECH SKX6080DRB Wine Coolers User Manual
**
Please removed all packaging, stickers and films from the products surface and clean the product’s surfaces with a damp cloth and mild deturgent before using for the first time.
Let the appliance stand upright for approximately 24 hours before connecting it to the power source, which helps to reduce the possibility of a cooling- system malfunction from handling during transportation.
Before using your Wine Coolers, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners. This product is intended solely for household use or similar applications such as:
- the kitchen area for personnel in shops, offices and other working environments
- on farms, by clientele of hotels, motels and other environments of a residential type
- at bed and breakfasts (B & B)
- for catering services and similar applications not for retail sale.
This appliance is intended to be used exclusively for the storage of wine or beverage, any other use is considered dangerous and the manufacturer will not be responsible for any omissions. Also, it is recommended that you take note of the warranty conditions.
ENERGY SAVING AND ECOLOGICAL PROTECTION
-
Please pay attention to the following special instructions for saving energy and ecological protection:
-
(a) The most energy-saving configuration requires shelves to be positioned in the appliance, please refer to the corresponding pictures in the manual.
-
(b) Please follow all the instructions in this manual on where and how to store wines in a the appliance for best preservation over the longest period, to avoid food waste;
-
(c) Please follow all the instructions in this manual on the recommended setting of temperatures in each compartment for optimum food preservation.
-
(d) An estimation of the impact of temperature settings on food waste: for the best storage time of wines, please consult your wine labels; the best storage time may reduce under other un-recommended temperature settings.
-
(e) The appliance has no special modes and features that can affect temperatures.
-
(f) This appliance is intended to be used exclusively for the storage of wine.
-
(g) Please follow all the instructions in this manual for the correct installation and end-user maintenance, including cleaning, of the refrigerating appliance;
-
(h) FOR a free standing appliance: this refrigerating appliance is not intended to be used as a built-in appliance.
-
(i) This refrigerating appliance is not suitable for freezing foodstuffs.
-
(j) Access to professional repair: https://service.temptech.no/
-
(k) Ordering spare parts: Please send emails to Service@temptech.no
-
(l) The minimum period during which spare parts, necessary for the repair of the appliance, are available:
Thermostats, temperature sensors, printed circuit boards and light sources are available for a minimum period of seven years after placing the last unit of the model on the market.
Door handles, door hinges, trays and baskets for a minimum period of seven years and door gaskets for a minimum period of 10 year, after placing the last unit of the model on the market -
(m) The minimum duration of the guarantee of the refrigerating appliance offered by the manufacturer, importer or authorised representative: Minimum guarantee is: 5 years for Norway, Sweden, Finland and Denmark.
-
(n) For appliances with climate class :
- Extended temperate: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C’;
- Temperate: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C’;
- Subtropical: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C’;
- Tropical: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C’;
-
(o) How to find the model information in the product database: Please visit our website https://temptech.no/ to find the instruction about how to find production information in EU database
IMPORTANT SAFETY INFORMATION
The Wine Coolers contains a refrigerant gas (R600a: isobutane) and insulating gas (cyclopentane), with high compatibility with the environment, that are, however, inflammable.
We recommend that you follow the following regulations so as to avoid situations dangerous to you:
Before performing any operation, unplug the power cord from the power socket.
- The refrigeration system positioned behind and inside the Wine Coolers contains refrigerant. Therefore, avoid damaging the tubes.
- If in the refrigeration system a leak is noted, do not touch the wall outlet and do not use open flames. Open the window and let air into the room. Then call a service centre to ask for repair.
- Do not scrape with a knife or sharp object to remove frost or ice that occurs. With these, the refrigerant circuit can be damaged, the spill from which can cause a fire or damage your eyes.
- Do not install the appliance in humid, oily or dusty places, nor expose it to direct sunlight and to water.
- Do not install the appliance near heaters or inflammable materials.
- Do not use extension cords or adapters.
- Do not excessively pull or fold the power cord or touch the plug with wet hands.
- Do not damage the plug and/or the power cord; this could cause electrical shocks or fires.
- It is recommended to keep the plug clean, any excessive dust residues on the plug can be the cause fire.
- Do not use mechanical devices or other equipment to hasten the defrosting process.
- Absolutely avoid the use of open flame or electrical equipment, such as heaters, steam cleaners, candles, oil lamps and the like in order to speed up the defrosting phase.
- Do not use or store inflammable sprays, such as spray paint, near the Wine Coolers. It could cause an explosion or fi re.
- Do not use electrical appliances inside the food storage compartments, unless they are of the type recommended by the manufacturer.
- Do not place or store inflammable and highly volatile materials such as ether, petrol, LPG, propane gas, aerosol spray cans, adhesives, pure alcohol, etc. These materials may cause an explosion.
- Do not store medicine or research materials in the Wine Coolers. When the material that requires a strict control of storage temperatures is to be stored, it is possible that it will deteriorate or an uncontrolled reaction may occur that can cause risks.
- Maintain the ventilation openings in the appliance enclosure or in the built-in structure, free of obstruction.
- Do not place objects and/or containers filled with water on the top of the appliance.
- Do not perform repairs on this Wine Coolers. All interventions must be performed solely by qualified personnel.
- This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or with a lack of experience and knowledge; provided that they have been given adequate supervision or instruction concerning how to use the appliance in a safe way and understand the hazards involved.
- Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- The appliance must be positioned so that the plug is accessible
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The appliance shall not be installed in the laundry
- GWP for R600a: 3
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer
SCRAPPING OLD APPLIANCES
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials.
Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules:
- WEEE should not be treated as household waste;
- WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present.
In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.
Conformity
By placing the marking on this product, we declare, on our own responsibility, compliance to all of European safety ,health and environmental requirements stated in the legislation for this product.
Energy Saving
- Energy Saving
- Always ensure good ventilation. Do not cover ventilation opening or grille.
- Always keep fan louvers clear.
- Do not place appliance in areas of direct sunlight or close to a stove, heather or similar object.
- Open or keep the doors open as little as possible
- Remove dust present on the rear of the appliance
Service
You should not attempt to repair the appliance yourself, as this could cause injury or a more serious malfunction. If you require a service call then please contact the Customer Care Department.
INSTALLATION
SKX6080DRB
Adjustable height 850 ~ 950mm
BOTTLE LOADING CAPACITY
SKX6080DRB
ACCESSORY INSTALLATION BEFORE OPERATING
UNPACKING AND CLEANING THE WINE COOLER
- Remove the exterior and interior packing materials.
- Let the appliance stand upright for approximately 24 hours before connecting it to the power source, which helps to reduce the possibility of a cooling-system malfunction from handling during transportation.
- Use a soft cloth to clean the interior surface with lukewarm water
A decorative plinth can be fitted to the front of the base vent, a cut-out should be made in the plinth with bigger size than the front louver. The cut out is required whether the front louver is removed or not.
Adjusting the height and levelling off your wine cabinet
-
The appliance is equipped with adjustable feet, so that the height may be adjusted to level the cabinet on uneven floor surfaces.
-
We recommend that two people carry out this procedure.
-
The height must be adjusted prior to building the appliance into the housing unit and it should be set at such a height that the top panel of the appliance fits exactly below the kitchen worktop.
-
Tilt the appliance approximately 60° to allow access to the adjustable feet.
-
Take care to ensure the cabinet is supported at all times.
-
Twist the foot into a suitable position to level the cabinet.
-
Repeat these steps for the other adjustable feet.
IMPORTANT: If the appliance is not level, then the door and door seal may be affected.
IMPORTANT: Do not move the appliance when the feet are adjusted high.
OPERATING THE WINE COOLER
WORKING CLIMATE
The appliance is designed for operating from SN to N climate (see below climate class chart). It is recommended to maintain the ambient around 22-25°C which helps the appliance working with low power consumption.
Klimaklasse | Romtemperatur |
---|---|
SN | 10 – 32 °C (50ºF-90ºF) |
N | 16 – 32 °C (61ºF-90ºF) |
ST | 16 – 38 °C (61ºF-100ºF) |
T | 16 – 43 °C (61ºF-109ºF) |
If the ambient temperature is above or below the designed climate range, the performance of the unit may be affected. For example, the appliance operating in extreme cold or hot conditions may cause interior temperatures to fluctuate, and the temperature set 5-20°C may not be reached sometimes.
WINE STORAGE
- The standard shelves are designed perfectly for Bordeaux bottle storage. The maximum loaded bottles may vary subject to the different size or dimension wine bottles you store.
- To prevent damaging the door gasket, make sure to have the door opened fully all the way before pulling the shelves out.
- Please store wine in sealed bottles.
- Do not cover the shelves with aluminum foil or any other shelf material which may prevent air circulation.
- Should the wine cooler be left empty for long periods it is suggested that the appliance is unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to avoid possible condensation, mold or odours forming.
- If the wine cooler is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.
- Pay attention to the recommended/preferable storage time of the wines you bought
- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance. The recommended temperatures for chilling, storing your wines is as below, please choose zones and temperatures accordingly..
- Recommended temperatures for chilling/storing your wines.
Wine Type | Recommender Temp. |
---|---|
Red Wines | 15 – 18ºC (59ºF-64ºF) |
Dry/White Wines | 9 – 14ºC (48ºF-57ºF) |
Rose Wines | 10 – 11ºC (50ºF-52ºF) |
Sparkling Wines | 5 – 8ºC (41ºF-46ºF) |
CONTROL PANEL IN CABINET
SKX6080DRB
POWER ON/OFF CONTROL
- When the appliance is plugged in to a power outlet, it powers on automatically.
- Touch the power mark and hold for 10 seconds to turn off (or turn on) the appliance.
- No matter it is under a locked or unlocked condition, you can turn off the appliance by touching the power mark and holding for 10 seconds.
Warning: To avoid damaging the compressor, please do not turn on the appliance again within 5 minutes after you turn it off.
LOCKING/UNLOCKING THE CONTROL PANEL
- To lock the control panel, touch the lock mark and hold for 3 seconds . When locked/unlocked a buzz sound will be heard.
- Under the locked condition, the control panel will not react to any touching order for Lighting On/Off and Temperature Setting.
INTERIOR LIGHTING ON/OFF AND BRIGHTNESS CONTROL
- Under the unlocked condition, touch the lighting mark to turn on(100%), and press lightning mark to adjust the light brightness, 50%, and press again to turn off(0%) the interior cool LED lighting.
- The lighting will stay on until it is manually turned off.
TEMPERATURE DISPLAY WINDOW
- The temperature is displayed in digital which is the best way to be read out. The digital is shown as the set temperature when you are setting the temperature.
- When the temperature probe is out of order, the display window will show with “HH” or “LL” instead of a digital figure while continuous buzz sound will be heard. In case of this happens, this appliance is considerately designed to keep periodical running of compressor and fans which helps to keep the coldness of the inside cabinet to protect your stored wines.
- When the display window will show with “2” ºC or “36” ºF, while continuous buzz sound will be heard, this is low temperature alarm, the compressor will stop, and press the power key, the buzz sound will stop.
- When the display window will show with “25” ºC or “77” ºF, while continuous buzz sound will be heard, this is high temperature alarm, the compressor will stop, and press the power key, the buzz sound will stop.
- To disable the sound alarm, short press power mark .
Warning: To avoid destroying your stored wines, it is strongly recommended to have the appliance repaired immediately, as the spare periodical running can not ensure the appliance to achieve the temperature you have set.
TEMPERATURE SETTING
- The temperature setting range 5-12 ºC (41-68 ºF) for upper zone and 12-20 ºC for lower zone.
- You need to select the set zone by touching the mark before touching the mark or to set the desired temperature. The zone temperature will flash when it is ready to be set.
- The first touch on or mark will recall the previous set temperature displayed.
- Touch the mark to increase the set temperature by 1ºC (or by 1ºF). On the contrary, touch the mark to decrease the set temperature by 1ºC (or by 1ºF).
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
When the control panel is locked, touch the marks with 2 fingers at the same time and hold for 3 seconds, you can interchange the Fahrenheit and Celsius display.
SELECTING ENERGY SAVING MODE
- Display screen mode setting: When system is in locked-state, steadily press the mark for 3 seconds, with a sound of buzzer beeping, the indicator LED8 will light up, indicating that system has changed to screen-off mode. In the same way, the indicator LED8 will be extinguished with a sound of buzzer beeping when system has been switched into screen-always-on mode.
- When you touch the power key in the condition of screen-off mode, the backlight lamps of the keys and the digital display screen will all go out.
- When you touch the power key in the condition of screen-always-on mode, all the backlight lamps of the keys will go out, the digital display screen will keep lighting.
- When system is in screen-off mode, touching any key will light the display screen.
CARE AND MAINTENANCE
CLEANING THE WINE COOLER
- Turn off the power, unplug the appliance, and remove all items including shelves.
- Wipe the inside surfaces with a sponge and baking soda solution. The solution should be about 2 tablespoons of baking soda to 1 quart (approx. 1 litre) of warm water.
- Wash the shelves with a mild detergent solution. Allow wooden shelves to dry before placing back into the wine cooler.
- Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
- Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with a clean soft cloth.
- Do not use steel wool or steel brush on the stainless steel. These will scratch the stainless steel with steel particles and rusting may occur
Carbon Filter Change
A good ambient air quality is important for wine maturing. The Carbon Filter is very helpful to absorb odor and improve air quality. For the models with Carbon Filter, we suggest to replace it once a year. Pls. contact your dealer to get the filter.
Removing the Carbon Filter:
o Hold the Carbon Filter and turn it 90° to the left or right to Remove it;
Reinstalling the Carbon Filter:
o Hold the Carbon Filter and turn it 90° to the left or right until it clicks
into place.
Defrosting
- Defrosting occurs automatically inside of the Wine Cooler during operation. The defrost water is collected by the evaporating tray and evaporates automatically.
- The evaporating tray and defrost water drain hole should be cleaned periodically. This will prevent water from collecting in the bottom of the Wine Cooler, instead of flowing down the defrost drainage channel and drain hole.
- You can also pour a small amount of water down the drain hole to clean inside of it.
- You should be careful to make sure that wine bottles do not touch the rear wall of the appliance, as this can interrupt the automatic defrosting process and deflect water into the base of your Wine Cooler.
Moving Your Wine Cooler
If you need to move your Wine Cooler to another location you should follow the steps outlined below.
- Remove all items from the Wine Cooler.
- Securely tape down all loose items such as the shelves inside of the appliance.
- Turn the adjustable foot up to the base to avoid damage.
- Tape the door closed.
- Ensure the appliance stays secure in the upright position during transportation. Also protect the outside of the appliance with a blanket or similar item.
Power Failure
- If power is cut to the appliance, for a few hours it will be able to maintain the temperature inside the cabinet. Providing that the number of times that the door is opened is kept to a minimum.
- If the power cut is for longer than a few hours, then you will need to store the contents in an alternate location to prevent them being affected by temperature rise.
IMPORTANT: If the appliance is unplugged, the power is lost or turned off you must wait 5 minutes before restarting the Wine Cooler. If you attempt to restart before this time delay, the compressor could be damaged.
Vacation Time
Short vacations : Leave the Wine Cooler in operation for holidays of less than 3 weeks.
Long vacations:
- If your appliance is not going to be in use for a period of time, you should remove the bottles of wine and switch off the appliance
- The interior should be cleaned with a solution of bicarbonate of soda and lukewarm water.
- The interior should then be thoroughly dried.
- To prevent mould growth, the door should be left slightly ajar.
Disconnecting From Power
If the unit is unplugged, or there is a power cut, you must wait for 5 minutes before restarting. Attempting to restart the Wine Cooler before 5 minutes has elapsed, may cause it not to function.
TROUBLESHOOTING
If you feel the appliance is not working properly, follow these instructions to try to see
if you can solve the problem simply by yourself before calling for service.
No. | PROBLEM | PROBLEM POSSIBLE CAUSE / MEASURE |
---|
1
| The wine cooler does not operate| Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
2
| The wine cooler is not cold enough| Check the temperature control setting.
External environment may require a higher setting. The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
3
| Automatically turn-on and turn-off frequently| The room temperature is hotter than normal.
A large amount of contents has been added to the wine cooler.
The door is opened too frequently. The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
4
| The lighting does not work| Not plugged in.
The circuit breaker tripped or a blown fuse. The lighting is turned off.
5
| Too much vibration| Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the compressor chamber are loose.
6
| The wine cooler seems to make too much noise| The rattling noise may come from the flow of the refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant.
Contraction and expansion of the inside walls may cause popping and crackling noises.
The appliance is not level.
7
| The door will not close properly.| The wine cooler is not level.
The door was reversed and not properly installed. The gasket is dirty.
The shelves are out of position.
8
| The display window is shown with “HH” or “LL” instead of a digital figure,
and/or with continuous buzz sound.
|
The temperature probe is out of order.
9
| The display window is shown with . “2” ºC or “36” ºF.|
Low temperature alarm.
10
| The display window is shown with “25” ºC or “77” ºF|
High temperature alarm.
INSTALL THE FRONT LOUVER
Fixing the front louver by 2 pcs ST4x70 screws.