durAVent Ultimate StovePipe All Fuel Double Wall Chimney Connector System Installation Guide
- August 9, 2024
- DuraVent
Table of Contents
durAVent Ultimate StovePipe All Fuel Double Wall Chimney Connector System
Product Specifications
- Product Name: StovePipe
- Type: All-Fuel, Double Wall Chimney Connector System
- Market: US and Canada
Product Features
- Model: USP Double-Wall StovePipe
- Designed for optimal wood stove performance
- Sleek, smooth, clean-look design to complement any stove and home
- Features:
- Provides better insulation & heat retention
- Allows flue to warm up quickly for a strong draft
- Reduces moisture to minimize creosote build-up
Frequently Asked Questions
Q: What is the warranty for the Ultimate StovePipe?
A: The Ultimate StovePipe comes with a lifetime warranty.
Q: What are the different sizes available for the StovePipe?
A: The StovePipe is available in sizes ranging from 6 to 8 inches.
Typical Installations
Ultimate StovePipe
MODEL USP DOUBLE-WALL STOVEPIPE
Ultimate StovePipe is designed to provide optimal wood stove performance and
has a sleek, smooth, clean-look to compliment any stove and home.
Double wall stovepipe is the best choice to connect a freestanding stove to a
chimney system. In comparison to single wall stove pipe, it offers:
- Reduces clearance to combustible materials, 6″ versus 18″
- Reduces creosote formation
- Enhances Draft
FEATURES
- Smooth, clean appearance on all components – pipe lengths, elbows and tees – to compliment any stove & home interior
- Sleek, smooth, clean-looking welded seams on inner and outer
- Satin coat steel 0.018″ outer casing specifically designed for optimum paint adhesion and scratch resistance
- Stainless steel inner liner warms quickly, holds the heat in and improves efficiency
- Air-insulated, double wall design – approximately 7/16″ air space
- Provides better insulation & heat retention
- Allows flue to warm up quickly to establish strong draft
- Reduces moisture to minimize creosote build-up & minimize maintenance
- Joints secured with screws for easy assembly and inspection
- Pre-drilled pilot holes for fast installation
- Faster start-ups lead to less smoke & less pollution in the environment
- Maintains higher flue-gas temperatures
- Results in lower outer surface temperature
- Easily fits most stoves, including cast iron stoves and stoves with oval collars
- Drip-free design to prevent creosote leakage
- Components individually packed
- Duravent Group Limited Lifetime Warranty
CERTIFICATION
- Tested & certified to CAN/ULC-S641 (Canada) and temperature requirements of UL 103 TYPE HT (USA)
- 6″ clearance to combustibles in all diameters – even when installed in a corner, or parallel with a ceiling
- NOTE – Always consult the stove manufacturer’s installation instructions for installation requirements
LENGTHS
- 6″, 7″, and 8″ diameters
- 6″, 12″, 18″, 24″, 36″, and 48″ lengths
- Easy to install and disassemble
- Hardware pack included
Size
| Product Number| Part Number|
A
|
B
|
C
|
D
---|---|---|---|---|---|---
6″| 276006| 6USP-L6| 6″| 6 7/8″| 6″| 4 5/8″
6″| 276012| 6USP-L12| 6″| 6 7/8″| 12″| 10 5/8″
6″| 276018| 6USP-L18| 6″| 6 7/8″| 18″| 16 5/8″
6″| 276024| 6USP-L24| 6″| 6 7/8″| 24″| 22 5/8″
6″| 276036| 6USP-L36| 6″| 6 7/8″| 36″| 34 5/8″
6″| 276048| 6USP-L48| 6″| 6 7/8″| 48″| 46 5/8″
7″| 277006| 7USP-L6| 7″| 7 7/8″| 6″| 4 5/8″
7″| 277012| 7USP-L12| 7″| 7 7/8″| 12″| 10 5/8″
7″| 277018| 7USP-L18| 7″| 7 7/8″| 18″| 16 5/8″
7″| 277024| 7USP-L24| 7″| 7 7/8″| 24″| 22 5/8″
7″| 277036| 7USP-L36| 7″| 7 7/8″| 36″| 34 5/8″
7″| 277048| 7USP-L48| 7″| 7 7/8″| 48″| 46 5/8″
8″| 278006| 8USP-L6| 8″| 8 7/8″| 6″| 4 5/8″
8″| 278012| 8USP-L12| 8″| 8 7/8″| 12″| 10 5/8″
8″| 278018| 8USP-L18| 8″| 8 7/8″| 18″| 16 5/8″
8″| 278024| 8USP-L24| 8″| 8 7/8″| 24″| 22 5/8″
8″| 278036| 8USP-L36| 8″| 8 7/8″| 36″| 34 5/8″
8″| 278048| 8USP-L48| 8″| 8 7/8″| 48″| 46 5/8″
TELESCOPIC LENGTHS
- 6″, 7″, and 8″ diameters
- Two-piece telescoping section comprised of (1) 36″ Length and (1) 36″ Adjustable Length
- Provides installation flexibility from stove to the chimney system
- Wide Finishing Band included
- Hardware pack included
Size| Product Number| Part Number| ****
A
| B| C MIN| C MAX| D MIN| D MAX
---|---|---|---|---|---|---|---|---
6″| 276066| 6USP-TL| 6″| 6 7/8″| ****
39 1/4″
| ****
72″
| ****
35 3/4″
| ****
68 1/2″
7″| 277066| 7USP-TL| 7″| 7 7/8″
8″| 278066| 8USP-TL| 8″| 8 7/8″
ADJUSTABLE LENGTHS
- 6″, 7″, and 8″ diameters
- 6″, 12″, 18″ and 36″ adjustable lengths
- Adjustable Lengths slide over any regular length for installation flexibility
- Adjustable Lengths may be used as a Stove Adapter
- Use in a vertical and/or horizontal installation
- Hardware pack included
Size| Product Number.| Part Number|
A
| B| C| D (MIN)| D
(MAX)
---|---|---|---|---|---|---|---
6″| 276004| 6USP-AL6| 6″| 6 7/8″| 6″| 2″| 4″
6″| 276010| 6USP-AL12| 6″| 6 7/8″| 12″| 2″| 10″
6″| 276016| 6USP-AL18| 6″| 6 7/8″| 18″| 2″| 16″
6″| 276034| 6USP-AL36| 6″| 6 7/8″| 36″| 2″| 34″
7″| 277004| 7USP-AL6| 7″| 7 7/8″| 6″| 2″| 4″
7″| 277010| 7USP-AL12| 7″| 7 7/8″| 12″| 2″| 10″
7″| 277016| 7USP-AL18| 7″| 7 7/8″| 18″| 2″| 16″
7″| 277034| 7USP-AL36| 7″| 7 7/8″| 36″| 2″| 34″
8″| 278004| 8USP-AL6| 8″| 8 7/8″| 6″| 2″| 4″
8″| 278010| 8USP-AL12| 8″| 8 7/8″| 12″| 2″| 10″
8″| 278016| 8USP-AL18| 8″| 8 7/8″| 18″| 2″| 16″
8″| 278034| 8USP-AL36| 8″| 8 7/8″| 36″| 2″| 34″
WIDE FINISHING BANDS
- 6″, 7″, and 8″ diameters
- Use to conceal & finish connection between Ultimate StovePipe at ceiling support or in a through the wall application
- Can also be used to conceal the connecting joint at the chimney adapter
- Hardware pack included
Size| Product Number| Part Number| A| B
---|---|---|---|---
6″| 276261| 6USP-WFB| 6 7/8″|
3 1/2″
7″| 277261| 7USP-WFB| 7 7/8″
8″| 278261| 8USP-WFB| 8 7/8″
30° ELBOWS
- 6″, 7″, and 8″ diameters
- Use fixed 30° elbow to offset flue as needed
- Non-positional connection system allows 360° rotation
- Hardware pack included
Size| Product Number| Part Number| A| B| C| D| E| F
---|---|---|---|---|---|---|---|---
6″| 276211| 6USP-E30| 6″| 6 7/8″| 2 1/2″| 3 1/2″| 4 1/4″| 1″
7″| 277211| 7USP-E30| 7″| 7 7/8″| 2 5/8″| 3 5/8″| 4 1/2″| 1 1/8″
8″| 278211| 8USP-E30| 8″| 8 7/8″| 2 3/4″| 3 3/4″| 4 3/4″| 1 1/8″
45° ELBOWS
- 6″, 7″, and 8″ diameters
- Use fixed 45° elbow to offset flue as needed
- Non-positional connection system allows 360° rotation
- Hardware pack included
Size| Product Number| Part Number| A| B| C| D| E| F
---|---|---|---|---|---|---|---|---
6″| 276215| 6USP-E45| 6″| 6 7/8″| 3″| 3 7/8″| 4 7/8″| 1 3/4″
7″| 277215| 7USP-E45| 7″| 7 7/8″| 3 1/4″| 4 1/8″| 5 1/4″| 2″
8″| 278215| 8USP-E45| 8″| 8 7/8″| 3 1/2″| 4 3/8″| 5 5/8″| 2 1/8″
90° ELBOWS
- 6″, 7″, and 8″ diameters
- Includes Tee Cap for easy inspection & cleaning access
- Hardware pack included
Size| Product Number| Part Number| A| B| C| D| E| F
---|---|---|---|---|---|---|---|---
6″| 276100| 6USP-T| 6″| 6 7/8″| 10 5/8″| 9 1/4″| 5 1/8″| 5 1/8″
7″| 277100| 7USP-T| 7″| 7 7/8″| 11 5/8″| 10 1/4″| 5 5/8″| 5 5/8″
8″| 278100| 8USP-T| 8″| 8 7/8″| 12 5/8″| 11 1/4″| 6 1/8″| 6 1/8″
MASONRY ADAPTERS
- 6″, 7″, and 8″ diameters
- For installations through a masonry wall
- Use to connect Ultimate StovePipe to an existing masonry chimney or a relined masonry chimney with stainless steel liner
- Hardware pack included
Size| Product Number| Part Number| A| B| C| D
---|---|---|---|---|---|---
6″| 276247| 6USP-MA| 6″| 6 7/8″|
11 1/2″
|
3 1/2″
7″| 277247| 7USP-MA| 7″| 7 7/8″
8″| 278247| 8USP-MA| 8″| 8 7/8″
INCREASERS
- 4 Sizes – 5″ to 6″, 6″ to 7″, 6″ to 8″ and 7″ to 8″
- Use to increase to a larger diameter chimney system
- Hardware pack included
Note: Increasing the diameter may reduce draft and increase creosote build-up.Size| Product Number| Part Number| A| B| C| D| E| F
---|---|---|---|---|---|---|---|---
5″ to 6″| 275306| 5USP-IN6| 5″| 5 7/8″| 6″| 6 7/8″| 6 1/8″| 4 3/4″
6″ to 7″| 276307| 6USP-IN7| 6″| 6 7/8″| 7″| 7 7/8″| 6 1/8″| 4 3/4″
6″ to 8″| 276308| 6USP-IN8| 6″| 6 7/8″| 8″| 8 7/8″| 8 1/8″| 6 3/4″
7″ to 8″| 277308| 7USP-IN8| 7″| 7 7/8″| 8″| 8 7/8″| 6 1/8″| 4 3/4″
REDUCERS
- 3 sizes – 7″ to 6”, 8″ to 7″, and 8″ to 6″
- Use to reduce the diameter of the system to accommodate a range of flue sizes
- Hardware pack included
Note: Check with appliance manufacturer or local code authorities for acceptable use.Size| Product Number| Part Number| A| B| C| D| E| F
---|---|---|---|---|---|---|---|---
7″ to 6″| 277366| 7USP-RE6| 7″| 7 7/8″| 6″| 6 7/8″| 6 1/8″| 4 3/4″
8″ to 6″| 278366| 8USP-RE6| 8″| 8 7/8″| 6″| 6 7/8″| 8 1/8″| 6 3/4″
8″ to 7″| 278367| 8USP-RE7| 8″| 8 7/8″| 7″| 7 7/8″| 6 1/8″| 4 3/4″
LOW PROFILE STOVE ADAPTERS
- 6″, 7″, and 8″ diameters
- Use to connect Ultimate StovePipe to a flush, recessed or standard appliance outlet
- Pair with an Adjustable Length to conceal the Low Profile
Adapter & create a seamless lookSize| Product Number| Part Number| A| B| C
---|---|---|---|---|---
6″| 276249| 6USP-LPSA| 5 15/16″| 6″|
2 1/2″
7″| 277249| 7USP-LPSA| 6 15/16″| 7″
8″| 278249| 8USP-LPSA| 7 15/16″| 8″
JOTUL STOVE ADAPTER
- 6″ diameter
- Use to convert Jotul flue outlets to Ultimate StovePipe
Size| Product Number| Part Number| A| B| C| D
---|---|---|---|---|---|---
6″| 276245| 6USP-SAJOTUL| 6″| 6 7/8″| 6 5/8″| 4 1/4″
OVAL-TO-ROUND ADAPTERS
- 8″ oval diameters
- Use to convert Oval flue outlets to round Ultimate StovePipe
- Hardware pack included
Size| Product Number| Part Number| A| B| C| D| E| F
---|---|---|---|---|---|---|---|---
8″ to 8″| 278250| 8USP-ORA| 6″ x 10 5/8″| 6 3/4″ x 11 1/2″| 8″| 8 7/8″|
15 1/4″
|
12 7/8″
8″ to 6″| 278251| 8USP-ORA6| 6″ x 10 5/8″| 6 3/4″ x 11 1/2″| 6″| 6 7/8″
IN-LINE DAMPERS
- 6″, 7″, and 8″ diameters
- Use to control the air being drawn through the chimney and to control the stove’s combustion
- Designed to be installed in a vertical run 2 to 3 feet above the stove
- Hardware pack included
Note: Check with appliance manufacturer for recommended use.Size| Product Number| Part Number| A| B| C| D
---|---|---|---|---|---|---
6″| 276260| 6USP-DK| 6″| 6 7/8″|
6″
|
4 5/8″
7″| 277260| 7USP-DK| 7″| 7 7/8″
8″| 278260| 8USP-DK| 8″| 8 7/8″
ELBOW OFFSET CHART
| 30° Elbow – 2x E30 with 1x Length| | 45° Elbow – 2x E45 with 1x Length| |
90° Elbow – 2x E90 with 1x Length
---|---|---|---|---|---
Size
| Pipe Length| ****
X – Offset
| ****
Y – Rise
| ****
Size
| Pipe Length| ****
X – Offset
| ****
Y – Rise
| ****
Size
| Pipe Length| ****
X – Offset
| ****
Y – Rise
6″
| 0″| 2 1/4″| 8 5/8″| ****
6″
| 0″| 4″| 9 1/2″| ****
6″
| 0″| 10 3/8″| ****
10 3/8″
6″| 4 5/8″| 12 5/8″| 6″| 7 1/4″| 12 3/4″| 6″| 15″
12″| 7 1/2″| 17 7/8″| 12″| 11 1/2″| 17″| 12″| 21″
18″| 10 1/2″| 23″| 18″| 15 3/4″| 21 1/4″| 18″| 27″
24″| 13 1/2″| 28 1/4″| 24″| 20″| 25 1/2″| 24″| 33″
36″| 19 1/2″| 38 5/8″| 36″| 28 1/2″| 34″| 36″| 45″
48″| 25″| 48 1/8″| 48″| 36 1/4″| 41 3/4″| 48″| 56″
7″
| 0″| 2 3/8″| 9 1/8″| ****
7″
| 0″| 4 1/4″| 10 1/4″| ****
7″
| 0″| 11 3/8″| ****
11 3/8″
6″| 4 3/4″| 13 1/8″| 6″| 7 1/2″| 13 1/2″| 6″| 16″
12″| 7 5/8″| 18 3/8″| 12″| 11 3/4″| 17 3/4″| 12″| 22″
18″| 10 5/8″| 23 1/2″| 18″| 16″| 22″| 18″| 28″
24″| 13 5/8″| 28 3/4″| 24″| 20 1/4″| 26 1/4″| 24″| 34″
36″| 19 5/8″| 39 1/8″| 36″| 28 3/4″| 34 3/4″| 36″| 46″
48″| 25 1/8″| 48 5/8″| 48″| 36 1/2″| 42 1/2″| 48″| 57″
8″
| 0″| 2 5/8″| 9 5/8″| ****
8″
| 0″| 4 1/2″| 11″| ****
8″
| 0″| 12 3/8″| ****
12 3/8″
6″| 5″| 13 5/8″| 6″| 7 3/4″| 14 1/4″| 6″| 17″
12″| 7 7/8″| 18 7/8″| 12″| 12″| 18 1/2″| 12″| 23″
18″| 10 7/8″| 24″| 18″| 16 1/4″| 22 3/4″| 18″| 29″
24″| 13 7/8″| 29 1/4″| 24″| 20 1/2″| 27″| 24″| 35″
36″| 19 7/8″| 39 5/8″| 36″| 29″| 35 1/2″| 36″| 47″
48″| 25 3/8″| 49 1/8″| 48″| 36 3/4″| 43 1/4″| 48″| 58″
30° Elbow – 2x E30 with 1x Telescopic Length
| Telescopic Length| X – Offset| Y – Rise
Size| MIN| MAX| MIN| MAX| MIN| MAX
6″| 35 3/4″| 68 1/8″| 20 1/8″| 36 1/4″| 39 5/8″| 67 5/8″
7″| 35 3/4″| 68 1/8″| 20 1/4″| 36 3/8″| 40 1/8″| 68 1/8″
8′| 35 3/4″| 68 1/8″| 20 1/2″| 36 5/8″| 40 5/8″| 68 5/8″
45° Elbow – 2x E45 with 1x Telescopic Length
| Telescopic Length| X – Offset| Y – Rise
Size| MIN| MAX| MIN| MAX| MIN| MAX
6″| 35 3/4″| 68 1/8″| 29 1/4″| 52 1/8″| 34 3/4″| 57 5/8″
7″| 35 3/4″| 68 1/8″| 29 1/2″| 52 3/8″| 35 1/2″| 58 3/8″
8″| 35 3/4″| 68 1/8″| 29 3/4″| 52 5/8″| 36 1/4″| 59 1/8″
90° Elbow – 2x E90 with 1x Telescopic Length
| Telescopic Length| X – Offset| Y – Rise
Size| MIN| MAX| MIN| MAX| MIN| MAX
6″| 35 3/4″| 68 1/8″| 46 1/8″| 78 1/2″| 10 3/8″
7″| 35 3/4″| 68 1/8″| 47 1/8″| 79 1/2″| 11 3/8″
8″| 35 3/4″| 68 1/8″| 48 1/8″| 80 1/2″| 12 3/8″
Customer Service and Support
- Airmate (USA)……………………………………… 800.992.8368
- Airmate (CAN)………………………………………888.735.5475
- Ameriflow………………………………………………800.252.8467
- Amerivent (Retail)……………………………….800.252.8467
- Amerivent (Hearth & Wholesale)….. 800.423.4270
- Amerivent (Support)…………………………..800.748.0392
- AMPCO (USA)……………………………………….800.669.3269
- AMPCO (CAN)……………………………………….888.735.5475
- Duravent………………………………………………. 800.835.4429
- Hart & Cooley………………………………………. 800.433.6341
- Hart & Cooley (Support)…………………….800.748.0392
- Heatfab (USA)……………………………………….800.772.0739
- Heatfab (CAN)………………………………………800.848.2149
- Lima……………………………………………………….. 800.423.4270
- Milcor………………………………………………………800.774.5240
- Portals Plus……………………………………………800.774.5240
- RPS………………………………………………………….800.624.8642
- Security Chimney (USA)……………………800.361.4909
- Security Chimney (CAN)……………………800.667.3387
- Selkirk (USA) Residential…………………. 800.992.8368
- Selkirk (USA) Commercial……………….. 800.848.2149
- Selkirk (USA) Support…………………………800.748.0392
- Selkirk (CAN)………………………………………..888.735.5475
Manufacturing & Distribution Centers:
-
CANADA
Nobel, ON Manufacturing
Laval, QC Manufacturing
Prescott, ON Distribution -
USA
Grand Rapids, MI Center of Excellence
Dallas, TX Distribution
Englewood, OH Distribution
Huntsville, AL Manufacturing & Distribution
Mira Loma, CA Distribution
Nampa, ID Manufacturing & Distribution
Turner Falls, MA Manufacturing & Distribution
Vacaville, CA Manufacturing -
MEXICO
Ojinaga, MX Manufacturing
Mexicali, MX Manufacturing -
Corporate Headquarters:
Duravent Group
28 W. Adams, Suite 1810
Detroit, MI 48226
Tel: 800.835.4429
Email: info@duraventgroup.com
www.duraventgroup.com
For warranty information: Scan this QR code or visit
www.duraventgroup.com/warranties
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>