QAZQA 2023-05-07 IM Paper Vertical Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA 2023-05-07 IM Paper Vertical
Product Information
Specifications
- Model: Bert FL Gold 106779
- Power Supply: 220-240V~ 50Hz
- Protection Rating: IP20
- Dimensions:
- Overall: 38cm x 14cm x 25cm
- Stand Height: 148cm
- Cable Length: 200cm
- Base Diameter: 28cm
- Manufacturer:
- FittinQ B.V. – Smaragdweg 52, 5527 LB Hapert, The Netherlands
- FittinQ LTD – 55 Baker Street, London, W1U 7EU, United Kingdom
Product Usage Instructions
Installation
- Identify a suitable location for the lamp.
- Assemble the lamp components according to the provided diagram.
- Secure the lamp base on a flat and stable surface.
- Connect the lamp to a power source using the provided cable.
Operation
- Switch on the power supply.
- Use the designated switches or controls to adjust the brightness or colour temperature as needed.
- To turn off the lamp, switch off the power supply.
Maintenance
- Regularly clean the lamp with a soft, dry cloth to remove dust and dirt.
- Avoid using harsh chemicals or abrasive materials that may damage the lamp’s finish.
FAQ
- Q: Can this lamp be used outdoors?
- A: No, this lamp has a protection rating of IP20, meaning it is suitable for indoor use only.
- Q: How do I change the light bulb in this lamp?
- A: To change the light bulb, carefully follow the instructions provided in the user manual. Ensure the lamp is unplugged before replacing the bulb.
- Q: Is this lamp dimmable?
- A: Yes, this lamp is dimmable. Refer to the user manual for instructions on adjusting the brightness levels.
Safety Precautions
Installation Instructions
- Bert FL Gold 106779
Dimensions
Overall Sizes
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before
installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class Il: the fitting is doubled insulated and does not require earthing
- Protection Class III: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltages.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by a wall switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed of together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
- Take note of the symbols when connecting wires:
WIRING
- : Live conductor
- : Earth conductor
- : Neutral conductor
CONTACT
FittinQ B.V.
- Smaragdweg 52, 5527 LB Hapert,
- The Netherlands
- www.qazqa.nl
FittinQ LTD
- 55 Baker Street,
- London, W1U 7EU
- United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>