schou 73449 25W Stick Massager Instruction Manual

June 5, 2024
schou

Model 73449
Instruction Manual

MASSAGER

Introduction

To get the most out of your new massager, please read these instructions before use. Please also save the instructions in case you need to refer to them at a later date.

Technical data

Voltage/frequency:           220-240 V — 50/60 Hz
Power rating:                         25 W
3 massage settings
4 speed settings
Includes 3 attachments
Do not use this appliance in a bathtub, shower, or water-filled bowl.
Class I: Must be plugged into an earthed socket.

Special safety instructions

This appliance must not be used by persons, including children, with a physical, sensory, or mental disability or anyone without experience or knowledge unless they are supervised or have been instructed how to use the appliance.
Children should be supervised to ensure that they do not play with the appliance. If you are pregnant, have a pacemaker, or have diabetes or any other health issues, you should ask your doctor for advice before using the massager.
If you have persistent muscle or joint pain that does not disappear after using the massager, you should ask your doctor for advice.
The massager’s heart function must not be used by people who are particularly sensitive to heat, or who find it difficult to feel the heat.
Do not use the massager on areas of skin with open wounds, or if the skin is discolored, burned, inflamed, or affected by eczema.
The massager should not be used for more than 20 minutes at a time.
Check regularly that the massager, cord, and plug are in perfect condition. If this is not the case, the massager must not be used.
Do not attempt to repair the massager yourself.
The massager, cord, or plug must not be exposed to heat, direct sunlight, moisture, sharp edges, and the like.
Always turn the massager off and unplug it from the socket when not in use or when cleaning it. Grasp the plug to pull it out, not the cord.
The massager is solely intended for domestic use and is not suitable for commercial use. Always use the massager in accordance with the instructions.

Main components

  1. ON/OFF button
  2. SPEED button (speed settings)
  3. Indicator lights for the selected speed
  4. PROGRAMME button (massage settings)
  5. Indicator lights for the selected program
  6. Holder for attachment
  7. Handle
  8. Cord and plug
  9. Heat attachment
  10. Massage attachment
  11. Soft attachment
  12. Button for heat function

Use

Attach the required attachment (9, 10, 1 1 ) to the attachment holder (6).
Plug the massager into a mains socket.
Take firm hold of the handles (7) and press the ON/OFF button (1 ) to switch the massager on. It comes on at the highest speed and the indicator light (3) for speed 1111 lights up.
Press the SPEED button (2) one or more times to adjust the massager to the required speed. The selected speed is indicated by the associated indicator light (3).

You can also choose one of the massager’s three programs by pressing the PROGRAMME (4) button one or more times:
Stimulate: 3 seconds of rapid vibration and a 2-second pause
Energize: Increasing speed (1-2-3-4-1-2-3-4)
Relax: Cyclical speed (1-2-3-4-4-3-2-1).
The associated indicator light (5) lights up. Apply the attachments to the skin and move them gently over the surface of the skin.
Note: The heat function only works if you have fitted the heat attachments (9). Press the heart button (12) to switch the heat function on and off.
Switch the massager off by pressing the ON/ OFF button once you have finished using it. Unplug the appliance.

Cleaning and maintenance

Do not use corrosive or abrasive cleaning agents.
Wipe the massager with a dry cloth. If necessary, the attachment can be wiped with a well-wrung cloth and then a dry cloth.

Service center

Note: Please quote the product model number in connection with all inquiries.
The model number is shown on the front of this manual and on the product rating plate. For:

  • Complaints
  • Replacement parts
  • Returns
  • Guarantee issues
  • www.schou.com

Environmental information

Electrical and electronic equipment (EEE) contains materials, components, and substances that may be hazardous and harmful to human health and the environment if waste electrical and electronic equipment (WEEE) is not disposed of correctly. Products marked with a crossed-out wheeled bin are electrical and electronic equipment. The crossed-out wheeled bin indicates that waste electrical and electronic equipment must not be disposed of with unsorted household waste, but must be collected separately.

Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
All rights reserved. The content of this manual may not be reproduced, either in full or in part, in any way by electronic or mechanical means, e.g. photocopying or publication, translated or saved in information storage and retrieval system without written permission from Schou Company A/S.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals