HARPER CRF-30 Compressor Portable Refrigerator Instruction Manual
- August 9, 2024
- HARPER
Table of Contents
HARPER CRF-30 Compressor Portable Refrigerator
Product Information
Harper Compressor Portable Refrigerator CRF-30, CRF-40, CRF-50
Specifications
- Manufacturer: Harper International Trading Limited
- Address: 15F, Radio City, 505 Hennessy Road, Causeway, Hong Kong
- Models: CRF-30, CRF-40, CRF-50
- Country of Origin: Made in China
Features
- Compressor portable refrigerator
- Passed evaluation procedures of Customs Union and Eurasian Economic Union
- Authorized service center: Progress-Plus LLC in Moscow
Technical Support
You can find more information about the product and contact technical support at:
- Website: https://harper.ru
- Technical Support Phone: 8-800-600-7107
Frequently Asked Questions (FAQ)
-
Q: Where can I find the user manual for the Harper Compressor Portable Refrigerator?
A: You can download the user manual from the official website or contact technical support for assistance. -
Q: How do I troubleshoot temperature control issues?
A: Check the power supply, ensure proper ventilation, and refer to the user manual for troubleshooting steps.
INTRODUCTION
Thank you for choosing HARPER products. Before use, please study the given user manual and keep it for future references.
SAFETY INSTRUCTIONS
IMPORTANT NOTICES
When using an electrical appliance, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and/or injury, including
the following:
- Read all instructions before using.
- This appliance is intended to be used in household and similar applications such as
- staff kitchen areas in shops, offices and other working environments;
- farm houses and by clients in hotels, motels and other residential-type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications
- The device is suitable for:
- Operation in vehicles
- Cooling and deep-freezing food
- Camping use.
WARNING
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- When positioning the appliance, ensure the supply cord is not trapped or damaged.
- Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
- When disposing of the appliance do so only at an authorized waste disposal centre. Do not expose to flame.
- Risk of child entrapment. Before you throw away your old refrigerator or freezer. Take off the doors. Leave the shelves in place so that children may not easily climb inside.
- Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- When disposing of the appliance, do so only at an authorized waste disposal centre. Do not expose to flame.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
Children aged from 3 to 8 years are allowed to load and unload refrigerating
appliances.
The refrigerant (R1234yf) and insulation blowing gas is flammable.
The refrigerant (R1234yf) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged.
If the refrigerant circuit should be damaged:
Avoid opening flames and sources of ignition.
Thoroughly ventilate the room in which the appliance is situated.
- Remove all packing material and carefully check your cooler box to ensure it is in good condition and that there is no damage to the cooler box or power cord and plug.
- Ensure the voltage is compliant with the voltage range stated on the rating label, and ensure the earthing of the socket is in good condition.
- Do not start the compressor power switch frequently (at least 5 minutes each time) to avoid damage to the compressor.
- Do not connect or disconnect the electric plug when your hands are wet.
- Place the cooler box on a dry and horizontal surface.
- Do not place the product upside down, or tilt it above 30 °.
- To ensure proper ventilation for the cooler box, make sure the cooler box is at least 15cm away on either side so as to allow correct ventilation on the appliance. Do not place the cooler box near an oven, radiator, or other source of heat.
- Never put the cooler box under the sunlight.
- The cooler box must be installed in an area protected from the elements, such wind, rain, water spray or drips.
- Metal sheet or other electric objects are not allowed to be inserted into the appliance to avoid fire and short circuit.
- To protect against risk of electric shock, do not pour water on cord, plug and ventilation, immerse the appliance in water or any other liquid.
- Unplug the appliance after using or before cleaning.
- Please keep the instruction manual.
- Pay attention to the use of heating function, do not put the canned beer and beverage containing gas into the box, which may cause explosion.
- The appliance is suitable for camping use but the appliance shall not be exposed to rain.
- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Clean regularly surfaces that can come in contact with food and accessible drainage systems.
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food. Please do not open the door frequently. If storing food for long periods of time, pack food in a Ziploc bag and set the temperature to 10-20 °C
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.
- This refrigerating appliance is not intended to be used as a built-in appliance
- This refrigerating appliance is not suitable for freezing foodstuffs. This refrigerating appliance is recommended to be used as a pantry appliance.
Warning:
- The appliance is only to be used with the detachable power supply unit.
- Class Ill appliances must only be supplied at SELV.
PRODUCT DESCRIPTION
The whole machine view
- Upper cover
- Upper cover handle
- Wheels
- Housing
- Air outlet
- DC socket
- Handle
- Control panel
Control panel view
OPERATION
Connect the power supply, plug the power plug into the appropriate socket, the
shape and voltage of the socket should be consistent with the label, and
connect to AC220V power supply.
Select control button: (the silk screen is located in the middle of the
button)
Cover open/close instructions:
When the cover is opened, the LED light is on, and the limit strip of door
body supports the door body, which is convenient for taking things.
When closing the cover, you need to lift the door limit strip (Fig. 1) to make
the cover close smoothly, and the LED lig ht is off.
FUNCTION
- Press the ON/OFF button, at this time, press the button, the adjustment button can be selected at one time for 1 0 °C, 5 °C, 0 °C, -1 0 °C and – 18 °C and start the machine without other operation.
- AT Refrigeration mode. Press the ‘ button to power on, the machine starts the refrigeration mode without operation. The temperature can be set as 1 0 c, 5 °c, 0 c, -1 0 c 0 0 0 and -18 °C according to the user’s requirements, and the required temperature can be selected by adjusting and .. ., buttons, and the current temperature in the cooler box will be displayed on the screen. When the temperature reaches the set temperature, the refrigeration is stopped. When the temperature is two degrees higher than the set temperature, and keep working at the set temperature.
- Memory function. After setting the temperature, if the user does not operate within 5 seconds. Memorize the setting at this time and execute the mode setting before after the second power on.
- If the machine turns 180 degrees, it is necessary to stop the compressor for 2 hours.
- Protection function.
- Over current protection: when the output current is too large, the output is turned off and has the function of overcurrent protection.
- Vehicle input protection:
When the vehicle input voltage is lower than 11 V ( +0.3 V / -0.7 V) (when the input voltage is 12 V), the voltage at startup is 11 V (±0.3 V) or 21 V (when the input voltage is 24 V), start the protection, turn off the load and alarm E3, and the alarm failure lasts for 12 seconds to shut down the machine.
- Over voltage protection: when the input voltage is higher than 17 V (when the input voltage is 12 V), or 30 V (when the input voltage is 24 V), start the protection, turn off the load and alarm E4, and the alarm failure lasts for 12 seconds to shut down the machine.
- Short circuit protection: in case of short circuit, the circuit has short circuit protection function.
- Temperature sensor short circuit: in case of abnormal short circuit of temperature sensor, start protection, turn off the load and alarm E1.
- Temperature sensor disconnection: in case of abnormal disconnection of temperature sensor, start protection, turn off the load and alarm E2.
TROUBLESHOOTING
MAINTENANCE
Specifications are subject to change by the manufacturer without prior notice.
Drawings and sketches are approximate. The indicated weights and geometric
dimensions are approximate.
The device is equipped with a power adapter, which double insulation is used
between the parts underneath dangerous high voltage to parts of the adapter
that come into contact with the user.
PARTS
- Refrigerator: 1 pc.
- Power cable DC:12B/24V: 1 pc
- AC power adapter: 100-240\/, 50/60Hz: 1 pc.
- User manual: 1 pc
- Warranty card: 1 pc.
SAFE DISPOSAL
This marking indicates that this product should not be disposed of together with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled disposal of waste, dispose of it responsibly to promote sustainable reuse of material resources. To return a used product, use the return and collection systems or contact the seller from whom the product was purchased. It can accept this product for environmentally safe disposal.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>