Qingcheng QCWS-B7 Zombiescat Coconut Ball series B7 Open Wearable Stereo User Manual

Qingcheng QCWS-B7 Zombiescat Coconut Ball series B7 Open Wearable Stereo

Product Information

Specifications

• Compliance: FCC Part 15
• Operating Conditions: FCC Rules

Product Usage Instructions

FCC Compliance

Ensure that the device is used in compliance with FCC Part 15 regulations to prevent harmful interference.

Operating Conditions

Operate the device under the following conditions:

1. Do not cause harmful interference.
2. Adhere to FCC rules and guidelines.

Frequently Asked Questions

• Q: What should I do if the device causes interference?
  • A: If the device causes interference, immediately stop use and contact customer support for assistance.
• Q: How can I ensure compliance with FCC regulations?
  • A: To ensure compliance, always follow the operating instructions provided and avoid using the device in a manner that may cause harmful interference.

Product Parameters

• Product Name: Zombiescat Coconut Ball series B7 Open Wearable Stereo
• Product Model: QCWS-B7
• Battery Capacity Earphone): 50 mAh
• Battery Capacity(Charging case) :250mAh
• Charging Time (Charging case): 1.5h
• Charging Time ( Earphone): 1.5h
• Implemented Standard: GB 4943.1-2022
• Transmission Distance: 10m
• Bluetooth Version: V5.3
• Frequency Response: 20–20KHz
• Music playtime: 5-6h

Operation Instructions

• Answer a call: Click on the left/right earphone
• Hang up the phone: Click on the left/right earphone
• Reject call: Long press and hold the left/right earphones for 2 seconds
• Play/Pause: Click on the left/right earphones
• Previous song:Double clicks on the left earphone
• Next track: Double clicks on the right earphone
• Siri: Long press and hold the left/right earphones for 2 seconds
• Long press the touch area for 3 seconds or out of the charging box
• Long press the touch area for 5 seconds or put it in the charging box

List of Accessories

Tips for using earphones

1. Automatic reconnect: take out the left and right earphones from the charging box. After the earphones start automatically, the headphones will be connected automatically within 5 seconds. The pairing sound is followed by a flashing green and white light in the main ear. The phone activates Bluetooth to search for QCWS-B7 and clicks on the “Connected” sound in both ears.
2. The pair of earphones only needs to be paired once, then the phone will automatically, and the “Connected” sound will be heard respectively.
3. If there is no sound on one side after the primary and secondary ear connection, please put the left and right ear into thecharging bin and take it out again.
4. Turn on without connecting any device, the earphones will turn off automatically after 5 minutes.
5. Auto-reconnect recently used equipment.
   Producer: Shenzhen Qingcheng Culture Technology Co., Ltd.
   After-sales call:0755-27835424

FCC Statement

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>