HAMPTON BAY HB3677-35KT Vanity Light and Bathroom Accessories Marsden User Guide

Item: TBD
Model: HB3677-35KT
VANITY LIGHT AND BATHROOM ACCESSORIES MARSDEN
USE AND CARE GUIDE

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. — 7 p.m., EST, Monday — Friday, 9 a.m. — 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

HB3677-35KT Vanity Light and Bathroom Accessories Marsden

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this vanity light and bathroom accessories. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Safety Information

• Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
• Consult a qualified electrician if you have any electrical questions or need to replace the driver.
• If you have any non-electrical questions about this fixture, please contact our Customer Service Team at 1-855-HD-HAMPTON or www.hamptonbay.com.

WARNING: Disconnect the power prior to removing or installing a light fixture.

Warranty

WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of three (3) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

Pre-installation

PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: Keep your receipt and these instructions for Proof of Purchase.

TOOLS REQUIRED

HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.

Pre-installation (continued)
PACKAGE CONTENTS

Installation

Mounting the hardware

• Thread the fixture mounting screws (HH) into the provided holes of the mounting bracket (KK).
• Thread the hex nuts (BB) onto the fixture mounting screws (HH). Do not tighten the hex nuts (BB) at this time.
• Pull the supply wires out from the outlet box and mount the mounting bracket (KK) to the outlet box using the bracket mounting screws (GG).
• Place the back plate of the fixture body (A) over the outlet box and onto the fixture mounting screws (HH).
• Adjust the fixture mounting screws (HH) until they protrude out from the back plate 1/4 in.
• Remove the fixture body (A) and secure the position of the fixture mounting screws (HH) by tightening the hex nuts (BB) against the mounting bracket (KK).

Connecting the wires
NOTE: If you have electrical questions consult your local electrical code for approved grounding methods.

• Connect the black supply wire to the black fixture wire using a wire nut (FF).
• Connect the white supply wire to the white fixture wire using a wire nut (FF).
• Connect the fixture ground wire to the supply ground wire using a wire nut (FF).
• Wrap all wire connections with electrical tape for a more secure connection.

Installation (continued)
Mounting the fixture

• Place the back plate of the fixture body (A) onto the fixture mounting screws (HH) and secure it into place by using the lock nuts (AA) provided.

Assembling the fixture
NOTE: Do not exceed a 60 watt incandescent light I bulb or equivalent SBCFL or LED bulb.

• Slide the glass shades (B) over the sockets and onto the socket cups.
• Secure the glass shades (B) to the socket cups using the socket rings (JJ).
• Install up to a 60 watt Light Bulb or Listed SBCFL (Self-Ballasted Compact Fluorescent Lamp [not provided]) in each socket of the fixture body (A). Do not exceed a 60 watt incandescent light bulb, or CFL or LED equivalent.

Installing the towel bar

• Determine where you would like to place the towel bar (C).
• Mark the ends of the towel bar (C). The markings should be 22-1/4 in. (567.5 mm) apart.
• Use an accessory mounting bracket (II) and mark the center hole and slots using a pencil. Repeat at the other end of the marked location. Ensure that the markings from center to center are be 22-1/4 in. (567.5 mm) apart before drilling.
• Drill holes at the slot markings using a drill and drill bit suitable for your wall type.
• Push the wall anchors (EE) in to the wall.
• Place an accessory mounting bracket (II) over the wall anchors (EE) and make sure that the hole for the set screw (CC) is facing inward.
• Secure the accessory mounting plate (II) onto the wall by using anchor screws (DD).
• Place the towel bar (C) over the accessory mounting brackets (II) and secure it in place by using the set screws (CC).

Installing the robe hook, towel ring, and toilet paper holder

• Use an accessory mounting bracket (II) and mark the slots using a pencil.
• Drill holes at the slot markings using a drill and drill bit suitable for your wall type.
• Push the wall anchors (EE) in to the wall.
• Place an accessory mounting bracket (II) over the wall anchors (EE) and make sure that the hole for the set screw (CC) is facing upward.
• Secure the accessory mounting plate (II) onto the wall by using anchor screws (DD).
• Place the accessory (D, E, or F) over the accessory mounting bracket (II) and secure it in place by using the set screws (CC).

Operation

• Turn on power at the circuit breaker or fuse box.
• Turn the light switch on to activate the fixture.

Care and Cleaning

EXTERIOR MAINTENANCE

• Use a dry or slightly dampened clean cloth and wipe the surface of the fixture.

INTERIOR MAINTENANCE

• Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
• Use a dry or slightly dampened clean cloth to wipe the interior surface of the fixture.
  NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Troubleshooting

❑ Test or replace the switch.
❑ Check the wiring.
❑ Replace the light bulb.
The fuse blows or circuit breaker trips when light is
turned on.| Check the wire connections.

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. — 7 p.m., EST, Monday — Friday, 9 a.m. — 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>